134,063 used machines on RESALE, but how to find them? Machine Search
Spherical roller bearing with bearing housing SKF 22330 CCJA/W33VA405 shaft diameter: Ø 150 mm outer diameter: Ø 320 mm height: 108 mm bearing housing: Ø 388 mm bolt circle: Ø 348 mm, 8x threaded hole: M16 x 2.0, depth: 45 mm Flange diameter: Ø 520 mm, Height: 40 mm Bolt circle: Ø 470 mm, 12x Bore: Ø 25 mm Shaft feedthrough: Ø 172 mm New ! Dimensions : 520 x 520 x 220 mm
Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 4 2233 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 90 x 90 x 88 mm
SKF / SNR - Batch of bearings and Jones cast iron bearing housings 226KG
Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - Welding current transmission - Hole in face plate 30mm, 20mm deep. - Documentation in English only. Table diameter 330 mm Table load 220 kg Swivel range 135 degrees Tilt adjustment: manual/mechanical manual Speed max. 5 rpm infinitely variable Table load 100 kg. vertical Total power requirement 0.125 kW Condition: never used / new (5)
Rapid traverses: X and Y axis: 100%: 4 m/min 50%: 6 m/min Z axis (rotary table): 100% - 6 rpm 150% - 9 rpm Travel (from table center) Y-axis: + 110 mm, -95 mm Travel X-axis: +55 mm, -55 mm Largest bore Diameter: 220 mm Rotary table diameter: 400 mm Lifting speeds: 22, 45, 55, 75, 110, 150 Stroke length: 200 mm Stroke displacement: 250 mm Feed/stroke: 0.01 - 0.2 mm lifting stroke: max. 0.3 mm Reference: Hercegfi - Lot 2
FAG - 22340K. MB - Batch of heavy industrial bearings & cast iron bearing blocks
Tapping chuck Bilz WFLK 225 / TR 28x2, SK 40 mount, incl. 3 pieces SK 40 mounts
This jet cabin is included as standard. Blasting gun 4-piece nozzle set Set of gloves Lighting Set of protective films Door on the right side Internal dimensions 830 x 530 x 530 mm Operating pressure 2.2 - 5.5 bar Air consumption at 6 bar min. 250 l/min Machine weight approx. 50 kg Package size max. 0.95 x 0.65 x 0.7 cm Condition: never used / new (5)
Cross table with swivel plate Table length 225 mm Table width 175 mm x-travel 120 mm y-travel 110 mm Table height 140 mm T-slots 12 mm Weight 17.5 kg Dimensions L x W x H 0.35 x 0.35 x 0.22 mm Condition: never used / new (5)
SKF, FAG and INA - Batch bearings and linear technology 225KG
Steam capacity max.: 22 t/h Permissible operating overpressure: 91 bar HD overpressure: 83 bar HD - Temperature: 510 °! C Exhaust gas temperature: 160 °C Water capacity: 15.6 m³
Lenze Type G50BB111MHBR2C MDEMAXX063-42C0C 3 chamfer 400 volt (50 tot 87 Hz ) 0.25 kW / 0.45 kW ( 87 Hz ) 22.44 RPM to 40.6 RPM Hole 25 mm Shaft 30 mm Drive Unit type: E84DGDVB55142PS L 45cm W 20cm H 20cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Perske, frequency converter from BRANDT KM 36 edgebanding machine -Type: 5 DW 58-6 / DA 58-2 -Input: 380 V 50 Hz -Output: 220 V 200 Hz -Power output: 5 kVA -Protection class: IP54 -Dimensions: 610/300/H235 mm -Weight: 83 kg
Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Walter & Sohn, frequency converter from the BRANDT KM 35 edge banding machine -Type: 501921522 / FU5 / 6 / 132LJD / 60 -Input: 380 V 50 Hz -Output: 220 V 200 Hz -Power: 5 KVA -Protection class: IP54 -Dimensions: 510/325 / H260 mm -Weight: 63 kg
Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor from a Scharmann table boring mill -Power: 3 - 11 kW -Speed: 220 - 3200 rpm -techn. Data: see photo nameplate -Shaft: Ø 45 x 104 mm -Construction: B3 -Dimensions: 1000/550 / H450 mm -Weight: 509 kg
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Artec, TIG welding machine -Cooling: Water-cooled -Type: TIG 235 i DC -Welding current: max. 225 A -incl.: ground cable, throttle valve, hose assembly -Dimensions: 880/430/H645 mm -Weight: 87 kg
Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Fan: Radial fan, unfortunately without type designation -Voltage: 220/380 V -Speed: 2200 rpm -Fan wheel: Ø 140 x 65 mm -Connection input: Ø 120 mm -Connection output: 90 x 90 mm -Dimensions: 300/290/H250mm -Weight: 6.2 kg
Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Fan: Radial fan, unfortunately without type designation -Voltage: 220/380 V -Speed: 2830 rpm -technical data: see photo type plate -Fan wheel: Ø 200 x 70 mm -Connection input: Ø 68 mm -Connection output: Ø 50 mm -Dimensions: 295/250/H320mm -Weight: 9.1 kg
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg
SARTORIUS ED2201-CW Precision Balance 2200g / 0.1g New equipment in its original packaging Laboratory Scale Reference : ED2201-CW Weighing capacity: 2200g (2.2kg) Readability: 0.1 g Linearity: 0.01 g Cooldown: 1 s Dimensions weighing area 180 x 180 mm Weight: 1.4Kg
Work table wood built-in approx. 220b cm, shelf, small contents fasteners, etc., well used
Meeting group glass table approx. 220x100 cm, 6 cantilever chairs leather/chrome frame
Hand-held lapping disc ITW Morlock approx. 220 cmm, case
Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 220 C Year of manufacture: 2012 Edge thickness: approx. 0.4 – 6 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 10 – 11 m/min Control: Electronic control panel (Brandt / HOMAG) Infeed: Manual infeed with driven conveyor chain Edge magazine: Rotary edge magazine (visible) Processing units: - Pre-milling unit - Gluing unit (hot-melt) - End trimming unit - Trimming unit - Radius scraping unit - Buffing unit Extraction: Extraction hood with multiple connections Glue system: Hot-melt glue application Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 16 A Full load current: 14 A Control voltage: 24 V Machine number: 0-261-09-2410 Remarks: Compact single-sided edge banding machine for straight edges with standard processing units ...
Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-183
Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-11
Wheeled wood chipper with diesel engine, electronic ignition, double drive roller, 200 mm chipping capacity NEVER USED Overall dimensions: 3500 x 1500 x 1500 mm Weight: 1000 kg Auction-ID: A7-45834-74
Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45834-11
Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-261
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-45833-67
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-45833-297
Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45834-261
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-45834-297
Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45834-183
Wheeled wood chipper with diesel engine, electronic ignition, double drive roller, 200 mm chipping capacity NEVER USED Overall dimensions: 3500 x 1500 x 1500 mm Weight: 1000 kg Auction-ID: A7-45833-74
Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-78
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-45834-67
Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45834-78
WUXGA projector EPSON EB-2255U, S/N X3L6770246L, ceiling mounting, remote control, without ceiling bracket (recessed in ceiling plate), hanging at a height of approx. 300 cm, with receiver TECHNISAT TechniStar S1 without power supply
Pallet truck YALE 220167022 load capacity 2,500 kg, built in 2017, S/N Y179331501, dead weight 61 kg, left tine bent, internal No. 40
Tapping chuck Bilz WFLK 225 / TR 28x2, SK 40 mount, incl. 3 pieces SK 40 mounts Auction-ID: A1-45977-222
Mobile compressor ROWI DKP-2200/50/3V, 2,200 W, 10 bar, 50 l container, year 2015
Doosan (Daewoo) Lynx 220 CNC lathe – a compact and very popular turning centre for serial production and precision machining. Key information • Manufacturer: Doosan Infracore Co., Ltd. (Korea) • Model: Lynx 220 (designation on nameplate: Lynx 220…) • Control system: FANUC (panel marked FANUC Series” visible in the photos) • Year of manufacture (from nameplate): 2005/10 • Power supply (from nameplate): AC 200/220 V, 3~, 50/60 Hz • Rated power (from nameplate): 11.0 kW • Max. load (from nameplate): 23.68 kVA • Full load current (from nameplate): 92.1 A • Short-circuit / interrupting current (from nameplate): 17,000 A • Serial number (from nameplate): 1422006821 (read from the photo) Equipment / accessories visible in the photos • SEI Filtration oil mist extractor / filtration unit mounted on the machine is not included in the sale. Auction-ID: A7-46 ...
: Doosan (Daewoo) Lynx 220 CNC lathe – a proven, compact turning centre for serial production and precision machining. Key information • Manufacturer: Doosan Infracore Co., Ltd. (Korea) • Model: Lynx 220 • Control system: FANUC • Serial number: L220122651 (read from the photo) • Year of manufacture: 2006/07 • Power supply: AC 200/220 V, 3~, PE, 50/60 Hz • Rated power: 11.0 kW • Max. load: 26.68 kVA • Full load current: 62.13 A • Short-circuit / interrupting current: 17,000 A Important note The SEI Filtration oil mist extractor / filtration unit mounted on the machine is not included in the sale. Auction-ID: A7-46285-12
The printer has been idle for 3 years and requires head and cable service. RIP is available. It is equipped with an additional roll printing option. Full specifications and dimensions are attached. Auction-ID: A7-46316-1
maximum number of results exceeded
please refine your search
