134,315 used machines on RESALE, but how to find them? Machine Search
width of the strips: 75 mm band length: 2000 mm band speed: 30 - 34 m/sec total power requirement: 4,1 HP weight of the machine ca.: 75 Kg dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the pallet rack traverse: Shewing system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x pallet rack traverse, new Material colour: RAL7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 02x locking pins, new Execution: compl. galvanized For securing the longitudinal members against unintentional lifting
WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS 2. AWAILIBLE Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm
Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection
Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit
Type SI 15 WF Dimension of sliding table 2700x2300mm Table travel 2600 mm Max. the length of the ruler by saw 900 mm Saw blade diameter 400 mm Blade tilt 0-45 deg Table size: 1150x630 mm Main spindle diameter 30 mm Main motor 11 kW 380 V Maximum clearance 140 mm Transport dimensions 2700 2700x1800x1200 mm Weight 820 kg Price 1200 Eur (EXW Jonava, Lithuania)
Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor, compact smart relay -Manufacturer: Schneider Electric -Type: SR1 A201BD -Dimensions: 125/90/H55 mm -Weight: 0.3 kg
Butterfly valve, flap valve, solenoid valve, solenoid valve -Manufacturer: Asco, two-way solenoid valve -Type: SCG262C022 -Connection: 1/4 -Number: 1x valve available -Dimensions: 70/40/H60 mm -Weight: 0.4 kg
Power supply, DIN rail -Manufacturer: Schneider, power supply from lathe DMT CD 480 / CD 320 -Type: NGDA 2415-920132T4 -Power: 360W -Input: 3 x 400V -Secondary: DC 24V -Quantity: 2x power supply available -Price per piece -Dimensions: 185/115/H140 mm -Weight: 6.2 kg/pc.
Rotary table, rotary indexing table, dividing head, dividing head -Dividing attachment with: three-jaw chuck and crank -Chuck: Ø 160 mm -Dividing head: rotatable, swiveling -Dimensions: 540/470/H250 mm -Weight: 67 kg
Dear Sir or Madam, As good as new unused 1x concrete station with 4x 680KVA inverter 1xTransformer station with switchgear see photos for details
Key data: 1100 , 2 , 160
TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...
Key data: 1350 , 3 , 160
Wide belt sanding machine 3 sanding belts 1370 x 2150 mm 2 Main engines
TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7
Key data: 950 , 1 , 160
Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front
Key data: 1350 , 2 , 160
Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging
Key data: 6 , 60 , 4000
Control system MEGA 120 & NESTING GROUPS SCM Group Joining unit with Dia-Leitz tools Glue basin station with quick-change pool Cross-cut unit with swivel function up to 15° Soft and postforming plates can also be known. Flush milling unit with radius milling Solid wood edges 6 x 60 mm Spraying device in front of joining unit Corner rounding unit Edge Brick Blade Unit Surface drawing blade unit Spraying device in front of babble unit Swabing unit Feed speed 10 m/min Machine length 4450 m
working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h
Key data: 1100 , 1 , 160
TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING
Meat cutting machine with program control different filing patterns Repaired
For sale we offer a strapping machine Model TV02 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. The fully automatic strapping machine TV 02 convinces with maintenance-free direct drives and Simplest operation. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Conveyor belts with four belts Strap closure off-center SPECIFICATIONS Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm min. 160 mm Height: max. (without press) 650 mm (with press) 550 mm min. 10 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. ...
For sale we offer a strapping machine model TW01 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Transport Rollers Specifications: Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm max. (with side straps) 460 mm min. 160 mm Height: max. (without press) 500 mm max. (with press) 400 mm min. 30 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. 450 mm Width: 165-210 mm Electrics 230 V, 1 phase, 50 Hz Power consumption 1,1 kW at 230V Pneumatics Operating ...
Tapping machine, pipe thread cutter -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg
DM 750 x 60 x 304,8mm unused in original box. Specification: CS25A 802 JJ6 VK1 For stainless material. Piston rods were ground with it.
Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCB05BL: control unit -LUB12: basic device -Price: per piece -Number: 16 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece
Safety switch, safety interlock -Type: AZM 161SK-12/12RK-024 -Protection class: IP 67 -Locking force maximum: 200 kg -Volt: 230 V. -Number: 14x available -Price: per piece -Dimensions: 130/90/H30 mm -Weight: 0.4 kg
MG 900 Schlatter Width: 1250 mm Length: 2000 mm Diameter 2-8 mm Pull in Pull out Cross Wire Magazine Stacker
Schlatter coordinate Orion Flex Range: 1350 x 600 mm MY: 2003
Planer width 630 mm chip removal 8 mm Planer shaft type Xylent spiral Main engine 7 kw HP HP 9,5 50 Hz Third pull-out roller min max planing height 3.5 mm - 300 mm
1 pallet always has 16 plastic boxes and a Euro lid. Very good used condition. Stacking containers The price for a pallet is 110 euros. There are about 200 Euro pallets.
Multi-compartment clamping prism for clamping to process mould pins.
1 of used basket erector, make Schleuter (Germany), type TLA, new 2003. Siemens S7 controls. Used for erecting 4- and 6-pack baskets for 330 ml glass bottles with diameter 60 mm x height 226 mm in a 30.000 bph bottling line. Potentially available at additional cost: basket laner (from 1 to 2 rows), Kettner Contipac (2003) 6-head rotary bottle packer (24 bottles per head), as well as Involvo/AdPack PTF60SW (2004) wrap-around/tray/shrinkpacker, and inter-connecting conveyors.
Hand lever shears, long knife, sheet metal and round steel shears, lever shears -Mubea: sheet metal and round steel shears -Cutting insert length: 200 mm -Dimensions: 380/160/H1240 mm -Weight: 22 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, Top jaws for power chucks, 3 sets -Type: SFA-AL 315, see photos -Hole spacing: 54 mm -Price/Sale: only complete set -Overall dimensions: 160/215/H90 mm -Weight: 6.8 kg
Description SHOOTING FRORIEP 40Dv Carousel Lathe. Modernized in 1998, among other things, a driven tool system (C-axis) was installed and the control was modernized to 840 C. Details Serial number 11330051 Year of construction 1980 Control SIEMENS electrical connection 400 V Face plate diameter 3,500 mm Workpiece height 3,000 mm Face plate over corridor 160 mm Total power requirement 71 kW Space requirement approx. 13 x 6 m Reconstruction 1998
Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws -Manufacturer: Schunk, soft top jaws 1 set = 3 pieces -Type: SWB-FR 131 -Dimension box: 75/90/H50 mm -Weight: 1.1 kg
Engine Make SCANIA Engine Type Schnell 6R20.1B Power KW/RPM 265 / 1500 Fuel Gas Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2014 GAS POWER HOLLAND 00316 38 63 90 71 (whatsapp)
Engine Make SCANIA Engine Type Schnell 6R20.1B Power KW/RPM 265 / 1500 Fuel Gas Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2014 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp
Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCB12 BL: control unit -LUB12: basic device -Price: per piece -Number: 27 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece
Gas cylinder cart, gas cylinder cart, steel cylinder cart, gas cylinder stair cart, stair hand truck -Manufacturer: Fedor Ulisch, stair hand truck with a wide shovel -Pipe frame: stable design with locking lever -Dimensions: 670/530/H1215 mm -Weight: 30 kg
Number of floors: . 0 Width of floors: . mm Depth of floors: . mm 1400x650x1000 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of floors: . 0 Width of floors: . mm Depth of floors: . mm 1400x500x1000The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of floors: . 0 Width of floors: . mm Depth of floors: . mm 1000x500x1000The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: . mm width: . mm height: . mm weight: . kg FahrbahrThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Weight: 170 kg
Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -Manufacturer: Schneider, control module -Control unit: LUCA 12BL -Base device: LUB12 -Dimensions: 170/45/H125 mm -Weight: 0.9 kg
approx. 24 pieces frame SSI Schaefer R3000, depth 30cm - used - : Price per piece: only 30.- € (net), packed and loaded from location! Manufacturer: SSI Schaefer Type: R3000 Year of construction: unknown Frame height: approx. 2.28m Frame depth: 30cm Condition: good Available: as of now Location. Frankenberg / Saxony
Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 04x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 02x chipboard second choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm ...
approx. 870 shelves SSI Schaefer R3000, shelves approx. 1,m x 0,40m - used - : Price per piece: only 8,50 € (net), packed and loaded ex location! Minimum order 1 pallet (approx. 180 pieces) Manufacturer: SSI Schaefer Type: R3000 Year of construction: unknown Dimensions: approx. 1m x 0,40cm 870 shelves Payload per floor: min. 100kg Condition: good Available: as of now Location. Frankenberg / Saxony
maximum number of results exceeded
please refine your search
