131,120 used machines on RESALE, but how to find them? Machine Search
Viewing by appointment Auction-ID: A1-40377-47
Screw pump Aggregate Manufacturer : Allweiler Type: SNF80ER46U12.1-VV1 with motor Type: TM132M/4AT The unit is NEW and fully functional. see pictures for more details.
Viewing day by appointment Unused Auction-ID: A1-40377-67
Screw Capper Dr. Datz with 4 capping heads, with electric height adjustment, Capacity: 8,000 bph, running direction: left-right, 28 mm closure
Viewing by appointment Auction-ID: A1-40377-30
Equipped with 4 weighing sensors Auction-ID: A1-45845-32
Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg
Key data: 63 mm, 1300
Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of Make: 1994 Machine No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-hard profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Cond ...
Used and untested; 18025920 Auction-ID: A7-46481-1056
Dosing screw conveyor BOSCHE 150 mm diameter Length 1.30 m Engine 1,5 kw 32 rpm right-hand thread, slope 110, at the outlet slope 150, Sliding Inlet 270 x 680 mm, outlet 170 x 170 mm Review and test run in our qualified workshop done Good condition
Used and untested; 18025452 Auction-ID: A7-46481-1036
Used and untested; 21035523 Auction-ID: A7-46481-152
Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg
Screw compressor Manufacturer: GHH Rand Model No.: CS80/3 Speed range: 2000 - 2950 Max. volume flow: 710 m³/h at max. working pressure 2.5 bar max power consumption 48kW The compressor is in good condition. Signs of use are present. for more details see pictures
Mitutoyo U-Clamp Gauge as good as new unused Mod. 105-408 Gauge 1000-1100 mm in the original List price 3450 €
Used and untested; 18031790 Auction-ID: A7-46481-1066
Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m
Used and untested; 18025925 Auction-ID: A7-46481-1086
Used and untested; 18025924 Auction-ID: A7-46481-1076
Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW
Used and untested; 18031789; Auction-ID: A7-46481-1046
3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition
used
Continuous melt filter The Berlyn Corporation, today: Berlyn ECM S/N 109F160
Self-learning lathe CMT TCH 700 x 5000 :::TECHNICAL SPECIFICATIONS::: CNC model: ECS - Spindle nose: ASA 11 - Spindle power: 35Kw - Turning diameter on the bench: 720mm - Turning diameter on the carriage: 385mm Turning length: 5000mm - Number of revolutions: 2200 - Bar passage: 105mm - Mechanical range change: yes - Number of ranges : 2 Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 12 First turret tool attachment type: VDI First turret X-axis travel: 450mm Z-axis travel first turret: 5000mm :::D DIMENSIONS AND WEIGHT::: Weight: 8000Kg
In order to submit a bid on this lot, a deposit of € 100 is required. To receive the bank details necessary for the transfer, please contact the auction contact person at matteo.tosin@surplex.com. As indicated in the notice of sale: The purchase is allowed within the European Community exclusively for the purpose of scrapping or compliance with regulations, subject to the signing of a specific commitment written and subsequent delivery of the documents of the scrapping from by specialized subjects (form and certificate of completion scrapping) no later than 5 days from the collection of the asset. In the event of the award of goods intended for scrapping, the successful tenderer, at the time of collection, you must fill in and sign the Waste Identification (FIR), consisting of four copies, one of which must be issued to the transferor at the same time as the collection of ...
maximum number of results exceeded
please refine your search
100 € 
