134,083 used machines on RESALE, but how to find them? Machine Search
Screw vacuum pump Manufacturer: Busch Type: NX 450 A Suction plugs: 450 m3/h Performance: 12 months Including: operating instructions, oil filling Status: as available as new date: by arrangement; ready for use
Worker-Federhenn pneumatic Cap scissors with table on casters to abbreviate window hardware L x W x H: 170 x 70 x 135 cm Weight approx. 100 kg Built in 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Screws station from the PV or solar industry, which gets just Aufwindabsolut as new ca 30 BetriebsstundenNeupreis for both plants, lt invoice 256.000,-€ to the mount out of so-called carrier frame inserts Graphitzum coat 2 stations in this range of solar modules for subsequent thermal treatment are Duennschichttechnologiees, are hardly separable, there is only a control or control cabinet for the whole SystemUnterlagen are available
Attachment: eccentric screw pump Manufacturer: Allweiler Type: On BP 6.2 E21 P01 Machine number: 7612455 Year of construction: 1998 Performance: 1.67 8.3 l / h Speed: 120-600 1 / min Engine: Nord, type SK Voltage: 400 V Length: approx. 900 mm Condition: used, ready
Attachment: eccentric screw pump Manufacturer: Allweiler Type: BN 2-24 Machine number: 160450 Year of construction: 2003 Output: 50-2500 l / h Speed: 35-360 1/min Pressure: 1-15 BAR Engine: Nord, 3 kW Voltage: 400 V Connection suction side: DN 65 Port side: DN 50 Length: 1500 mm Other: with ventilation F100 Condition: used, ready
Attachment: eccentric screw pump Manufacturer: Allweiler Type: AE1E 550/10 / 11 Dr Machine number: 7218305 Year of construction: 1993 Performance: Q 70 / 417 l/min, n 60/330 1/min Engine: 5.5 KW katt Voltage: 380 V Connection suction side: DN 100 Port side: DN 100 Length: 1900 mm Condition: used, ready
From checkweigher to filling scale The 1-head scale is the most cost-effective solution for partially automating manual filling. With a reproducible accuracy, the filling speed can be significantly increased. Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 1 • Volume weighing container: 4.5 liters • Bunker volume: 20 liters • Weighing range infinitely adjustable between 20 and 1,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 15 weighings per minute, depending on product, adjustme ...
Weighing with maximum flexibility The larger counterpart to the 1-head scale is suitable for faster manual filling, as well as for small automations. Application: Dose free-flowing products in accurate quantities. Suitable for manual filling and automation Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 2 • Volume weighing container: 4.5 liters • Bunker volume: 35 liters • Weighing range infinitely adjustable between 50 and 3,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 30 w ...
Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak Cap Applicator 21, TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved
FOR SALE... TAIKO TWO ROTOR SCREW PUMP TO WHOM IT MAY CONCERN WE VE NEW UNUSED TAIKO CSL-600 TWO ROTOR SCREW PUMP AT OUR STOCK THIS PUMP KEEPED AS SPARE PUMP AT TANKER VESSEL. PLS FIND SPEC AT BELOW. SERIAL NO.: NO. A1K6369 TYPPE: CSL-600 CAP: 560 m3/h REV: 1300MÄ°N POWER: 400PS DATE OF MANUFACTURE: NOV 2006 PUMP IS READY TO TRANSPORT AT WARE HOUSE. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Abu Ugurluba Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: 90 232 618 03 85 Mobile: 905556084850aliagamarine.com TURKEY
Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 15-6LT Commission no.: 96373 Year of construction: 1997 Flow rate: 14 m ³/h Pressure in the pressure port: 2.00 bar Speed: 344 rpm Motor: kW 2.24 Inlet: DN 80 PN 16 DIN 2533 Pressure connection: DN 65 PN 16 DIN 2533 Material: Main body GG25 Shaft: 1.4021 Stator: NBR Buna Rotor: 1.2436
Complete extrusion line with support for sale, dispense, extrude, granulate and SAG (complete pictures in the PDF). Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, new price from 690.000 € Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Also here: Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote
Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 35-12 Machine number: 176490 Year of construction: 2005 Power: 2-40 m3/h Pressure: 1--8 bar Speed: 1450 RPM. Connection suction side: DN 150 Port side: DN 125 Length: 2400 mm Condition: used, ready
Complete screw and cylinder with filament and lockable nozzle. NEW!
Attachment: eccentric screw pump Manufacturer: Netsch Type: NE 20 B Machine number: 263384 Year of construction: 1995 Power: 1,3 m3/h Pressure: 12 bar Engine: HEW, 0.37 KW, 400 V, 1380 RPM Connection suction side: DN 40 Port side: DN 40 Length: 1200 mm Condition: used, ready for operation, with variable speed gears
Attachment: eccentric screw pump Manufacturer: Netsch Type: A 60B Machine number: 263381 Year of construction: 1995 Performance: 19 m3/h at 2 bar Pressure: 1--8 bar Motor: 4 KW, 400V, speed 1445 RPM Connection suction side: DN 100 Port side: DN 100 Length: approx. 2000 mm Condition: used, ready
Attachment: eccentric screw pump Manufacturer: Netzsch Type: 2 NE 60A Machine number: 221234 Year of construction: 1990 Power: 47 m3/h Pressure: 4-8 bar Speed: 1450 RPM. Engine: North Power: 15 kW, 400 V Connection suction side: DN 100 Port side: DN 100 Length: approx. 2800 mm Other: with an electric variable speed gears Condition: used, ready
Attachment: eccentric screw pump Manufacturer: Allweiler Type: SLBP 720-1 Machine number: 7640010 Year of construction: 1989 Power: 67-484 l / min Speed gear: 50-280 RPM. Engine: Bauknecht Power: 5.5 kW, 380 V Speed: 1440 RPM Connection suction side: DN 100 Port side: DN 100 Length: 1800 mm Condition: used, ready
Pipe screw, screw conveyor, cement screw, dosing screw used for cement, fly ash, sand, lime, cereals or similar materials Conveying length (from inlet to outlet): approx. 2.5 m Diameter Ø: approx. 260 mm Slope approx. 120 mm Spiral height approx. 90 mm Spiral plate approx. 8 mm Inlet / outlet: approx. Ø 260 mm Remote storage with stuffing box Drive with gear motor 4 kW 68 rpm Total dimensions: approx. 3700 x 450 x 550 mm Due to the stable construction, the screw is suitable for abrasive substances. Thanks to our own special machine construction, changes can also be made. We have various pipe screws in different lengths, slopes and diameters from a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers... Changes and errors in the technical data, information and prices as well as prior sa ...
Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY02512B Machine number: 409232 Year of manufacture: 2009 Output: 200-300-350 l / h Pressure: 4-6-8 bar Motor: Lenze Speed: 1410 RPM. Inlet connection: DN 50 Port side: DN 50 Length: 1200 mm Condition: used, ready for operation (new stator)
Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 1-12 Machine number: 176411 Year of construction: 2005 Capacity: 150-2200 l / h Pressure: 2 bar Speed: 1400 RPM Inlet connection: DN 50 Port side: DN 50 Length: 1200 mm Condition: used, ready
Glass scale by Heidenhain Type LS303 LS603 LS703 Only types and lengths listed below are available. 1 x ML 1020mm LS703 1 x ML 1740mm LS703 1 x ML 1140mm LS603 1 x ML 220mm LS303 1 x ML 370mm LS303 Price on request Special price
Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY Machine number: 321637 Year of construction: 2001 Power: 90-1500 l / h Speed: 24-400 rpm. Pressure: 0-16 BAR Motor: 1,5 kW, 400 V North, Connection suction side: DN 70 Port side: DN 70 Length: 1700 mm Condition: used, ready
Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 30B Machine number: 235197 Year of construction: 1992 Power: 0.2-1.4 m3/h Pressure: 0-6 BAR Motor: Stöber 1.1 kW, 400 V Inlet connection: DN 50 Port side: DN 50 Length: 1500 mm Miscellaneous: electrical Verstellgetrieb with ventilation Condition: used, ready
Screw Vacuum Pump - Unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As Performance: 12 months Suction power: 320 m3/h connection: ISO-K 63 final pressure: approx. 1.2x10-2 mbar (abs.) Including: user manual ; ready for use
Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price
Scroll vacuum pump Status: used, over-checked, functional Manufacturer: Edwards Type: GVSP 30 Motor: 400V Equipment: Mineraloel nominal suction digesters: 30 m3/h End pressure: <0.01 mbar (abs.) Including: user manual
Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure
Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.
Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...
Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 69 A Machine number: 253233 Year of construction: 1994 Capacity: 25m 3/h Engine: Dietz KW: 5.5 Voltage: 400V Connection suction side: DN 100 Port side: DN 100 Length: 2300 mm
Machine: eccentric screw pump Manufacturer: Netzsch Type: 3 NE 08 Machine number: 253173 Year of construction: 1994 Capacity: approx. 300 l / h Engine: Dietz Drezhal: 1390 RPM KW: 0.55 Voltage: 400V Connection suction side: 3/4 inch Connection pressure side: 3/4 inch Length: 800 mm
WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...
Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch PN. pressure max. 8 bar Load max 8 kg Weight robot 51 kg + Control consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see picture Since the article is available several times and the robots carry different working tools these are only sample pictures and may differ. Item condition used (Changes and errors in the technical data, information reserved!) In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please ...
Material: Stainless steel V2A Drive: 2,2 KW.
Bosch Turbo Scara SR4 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch Type: turbo scara SR4 PN. pressure max. 8 bar Load max. 5 kg Weight robot 40 kg + Control consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data to follow Item condition used Since the article is available several times and the robots carry different working tools these are only sample pictures and may differ. (Changes and errors in the technical data, information reserved!) In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled ...
Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, new price 150,000 € Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.
Complete extrusion line with foster, dispense, extrude, granulate, plummeting to sell. Extruder: Abdullah one shaft extruder, 62 kW motor, suitable for 100-200 kg / h ABS, ASA, PP, 2001. Dosage: A main scale integrated for flakes or granules Cigynvipu Granulation: strand dryer Scheer what 100 BJ. 2002, Stranggranulierer Scheer SGS 100 E4, year 2006 Vacuum pump: Eigenbau Also available: grading sieve, granulate conveying blower, complete steel bagging Tower
Sychron motor with ball screw, MDD115C-N-015-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2008. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 119x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB2, R911262637, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 55kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.319/10.50.353.591 T3, D50mm, total length of the screw approx. 591mm, thread ...
Sychron motor with ball screw, MDD115C-N-015-N2M-130GB0, Rexroth, mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with small traces of storage! The assembled linear actuator comes from a spare parts warehouse of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor traces of storage. Technical data: 1 complete linear actuator,181x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB0, R911262636, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 52kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.339/10.63.1033.1276 P3, D63mm, total length of the screw approx. 1276mm ...
Sychron motor with ball screw, MDD115C-N-015-N2M-130GB0, Rexroth, mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with minor traces of storage! The assembled linear actuator comes from a spare parts warehouse of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor traces of storage. Technical data: 1 complete linear actuator, 181x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB0, R911262636, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 52kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc. ball screw 1516.339/10.63.1033.1276 P3, Fa. Steinmeyer, D63mm, total length of the screw ap ...
Sychron motor with ball screw, MDD115C-N-015-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 169x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB2, R911262637, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 55kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.310/10.63.848.1091 P3 D63mm, total length of the screw approx. 1090mm, thread ...
Sychron motor with ball screw, MDD112D-N-030-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 185x26x28cm, ca. 250kg, consisting of: - 1 pc Sychnron motor MDD112D-N-030-N2M-130GB2, R911260224, from Rexroth, permanent magnet motor, max. 75Nm, 3000rpm, 62kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.78/10.80.910.1189 P3 D80mm, total length of the screw approx. 1189mm, thread ...
2-sided LED display panel, SX502-420/05/0X-200-0A-20/0, Siebert, mint condition Special price The current price of a similar product is € 5.300 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! This high quality scoreboard was purchased in early 2000 and has been originally packed in spare parts storage since then. The unit is as good as new and has never been used. On the part of the manufacturer there is a limited service. Parallel interface for Profibus Serial interface for PC 2 page LED display 104 x 40 x 21cm Incl documentation and programs Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will ref ...
Ground precision ball screw, D63mm, 1275mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 1516.6/30.63.1010.1275 P3, Fa, Steinmeyer, Ball screw diameter 63 mm, Pitch 30 mm, Length of thread 1010 mm Length of ball screw nut 325 mm, Max. total stroke 685mm, Total length of the spindle 1275 mm Diameter for coupling with motor 42 mm Diameter bearing seat 50 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the uni ...
- Foerder speed infinitely variable rated power up to 1000 kg/h engine power 0.37 (0.5) kW (PS) Electrical connection 230V 50Hz (single-phase) Electrical fuse 16 A Laenge 2500 mm width 70 0 mm Hoehe 2100 mm He He Assumption 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inside Connection for washing 1/2 outside High fruit delivery 1750 mm ; New machine - best condition
Ground precision ball screw, D63mm, 1458mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 1516.555/10.63.1215.1458 P3, D63mm, 1458mm, Fa. Steinmeyer, Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 1215 mm Length of ball screw nut 192 mm, Max. total stroke 1023 mm, Total length of the spindle 1458 mm Diameter for coupling with motor 32 mm Diameter bearing seat A 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional ...
Schraegaufzug SA200 with swivelr raetzmuehle RM2,2 - Use with or without raetzmuehle without conversion work possible nominal power up to 1000 kg/h motor power Elevator 0.37 (0.5) Muehle 2.2 (3.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 2620 mm width 700 mm Height 2100 mm He he Assumption 800 mm Weight 185 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 internal connection for washing mm Supplied cutting sieve 9 and 16mm ; New machine - best condition
Ground precision ball screw, D40mm, 1479mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 3526.7/25.40.852.1479E P3, D40 mm, 1479 mm, Fa. Steinmeyer, Ball screw diameter 40 mm, Pitch 25 mm, Length of thread 852 mm Length of ball screw nut 140 mm, Max. total stroke 712 mm, Total length of the spindle 1479 mm Diameter for coupling with motor 28 mm Diameter bearing seat A 32 mm, Diameter bearing seat B 20 mm Diameter 34 mm x 340 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for ...
maximum number of results exceeded
please refine your search
