sc 17 used for sale

Saeed empty pallet magazine with roller conveyor

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

suitable for cooling dense scribbles, L:585 x W: 500 x H: 390 mm, 220 V, 49 kg; good, ready to use

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel

This machine with two motors each 11 kw was used for tire recycling complete with hopper and control panel.

; Mileage [km]: 6; Power [PS]: 300

; Mileage [km]: 8; Power [PS]: 450

; Mileage [km]: 8; Power [PS]: 480; Accessories: Turbo; Amount of previous owners: 1

; Mileage [km]: 6; Power [PS]: 290

; Mileage [km]: 8; Power [PS]: 500

; Mileage [km]: 8; Power [PS]: 400

; Mileage [km]: 6; Power [PS]: 240

; Mileage [km]: 6; Power [PS]: 280

; Mileage [km]: 6; Power [PS]: 530

; Mileage [km]: 8; Power [PS]: 420

; Mileage [km]: 8; Power [PS]: 530

; Mileage [km]: 6; Power [PS]: 330

; Mileage [km]: 8; Power [PS]: 420

THICKNESS PLANER type SAC SUERI RS 53 S second hand machine CE mark : Yes technical details : useful working width mm. 530 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed by inverter m / min. 4 ÷ 16 motorized table positioning with electronic reading n.4 knives "Tersa" main motor power Hp 5,5 volt. 380/50

; Mileage [km]: 8; Power [PS]: 450

; Mileage [km]: 6; Power [PS]: 280

THICKNESS PLANER type SCM S 52 SURFACE PLANER type SCM F 410 SPINDLE MOULDER type SCM T 130 NOT SEPARATE SALE second hand machines

Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...

material width: 300 mm coil weight: 3 t material thickness: 2 - 4 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer you here a used shelf of the manufacturer SSI Schäfer for sale. Suitable for a stand depth of 500 mm Technical data on the shelf: Manufacturer: SSI Schäfer Type: R3000 Type designation: ZB351020 Included in delivery are: 01x Shelf, used Material color: galvanized Length: approx. 994 mm Depth: approx. 490 mm Height: approx. 40 mm The shelves are used and can be light Have dirt, dents, scratches, etc. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems B2nxkxfje Delivery with our own fleet (without discharge)

We offer you here a used side wall perforated of the manufacturer SSI Schäfer for sale. - Suitable for a stand depth of 500 mm - The side walls are suitable for the Fixing of perforated plate hooks - The side walls are made with screws directly attached to the stand frame Technical data for the side wall: Manufacturer: SSI Schäfer Type: R3000 Included in delivery are: 01x side wall, used Version: perforated Material: Stalblech Surface: galvanized Colour: silver Height: approx. 2,000 mm Depth: approx. 470 mm - The side walls are used and can be easily Have dirt, dents, scratches, etc. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving s ...

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.