sc 17 used for sale

MAHR MarShaft SCOPE 600 plus 3D Technical Data: Max. workpiece length: 600 mm Max. workpiece diameter: 120 mm Max. workpiece weight: 15 kg Measurement method: optical / tactile, 3D Measurement range Z: 760 mm Connection: 110/230 V, 50/60 Hz Power: 700 VA

Panel saw Type: CLASS SI 400 Manufacturer: SCM Year: 2023 panel sizing capacity: 3200 × 3200 mm sliding carriage length: 3200 mm cutting width with parallel fence: 1270 mm maximum main saw blade diameter: 400 mm maximum cutting height at 90°: 140 mm maximum cutting height at 45°: 97 mm blade tilting: up to 45° main saw blade speed: 3000 / 4000 / 5000 rpm scoring saw blade speed: 8500 rpm main motor power: 7 kW scoring motor power: 1.3 kW machine weight: approx. 1070 kg EQUIPMENT independent scoring unit professional 3200 mm SCM sliding carriage eccentric clamp extendable frame for angular cuts parallel fence with micrometric adjustment direct main motor start dust extraction from main unit and overhead guard CE safety equipment Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

faceplate diameter: 4000 mm swing diameter: 4600 mm turning height: 2650 mm workpiece weight: 100 t max. torque on the faceplate: 178,4 kNm faceplate speeds from - to: 1,8- 80 U/min feed stepless: 0,1 - 6000 mm/min z-axis: 1500 mm Control: Siemens 880T drive motor: 100 kW ram head dimension: 300 x 300 mm x-axis: R: 2500 / L: 2500 mm y-axis: 2900 mm z-axis: R: 200 / L: 1500 mm ram head dimension: 300 x 300 mm total power requirement: 69 kW weight of the machine ca.: - t dimensions of the machine ca.: 17,5 x 10.5 m - CNC control Siemens 880T - Coolant system - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale very well preserved table reader school, built in 1966, length 2.80 meters, width 1.70 meters, height 1.50 meters, weight approx. 2.5 tons.

Tank Head Manufacturing  Dishing and Flanging machine up to 12 mm in 260 Nm/mm2 Forming roll optional for sale Radius 50 / 70 / 100 / 150 / 200 / 250 / 300 Fully hydraulic machine Field off aplication heads, bottoms for vessel, tanks, beverage manufacturing tanks, beer tanks Torispherical heads Ellipsoidal heads Spherical bottoms Dished bottem tank construction Flat bottems Sperical dished bottoms Cones    

Wide belt sander SCM Sandya 3 RCS 95 Working width 950 mm Number of generators 2: 1 steel shaft generator 2 station wagon unit – rubber shaft + boot Boot automatically fired Oscillation on photo cameras 2 transport belt speeds Motor power 11KW Paper Size 1900×970 mm

Description Item #8985 - FLAVOUR COATING AND SEASONING LINE FOR EXTRUDED SNACKFOOD / BREAKFAST CEREAL PRODUCTS Manufactured by SCHAAF All from Year 2018. Line includes : TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm. TYPE 282 DRUM DRIER/ROASTER 1600 PTFE, Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures ...

Cylindrical grinder FRIEDRICH SCHMALTZ R4/2000.

SCM SI400 Vanguard sliding table saw, 3-ax Control, Swivelling cross-cut table Manufacturer: SCM Type: SI400 Vanguard M-Nr.: Year: 2004 Touchscreen: 12″full-colour touchscreen, start-stop function in sliding table Control: 3-ax control, with control panel at eye -level 999 programm positions, 6 cuts per programm, help function with graphics, collision control Sliding Table: 3.200mm Saw Blades: Ø 250 – 400 mm Main saw: 5,5 kW, 3.000-4.000-5.000 rpm Cutting Heigt: 130 mm (saw diam.. 400 mm-90°, 92 mm- 45°.) Tilting: 0 – 45° Scorer: ø120 mm, 2-ax control Motor: 0.75 KW, 8.500 rpm Cutting Width: 1.500 mm Rip fence: anodised aluminium Cross-cut table: Vanguard cross-cut table with swiveling -50° upto 50° Cross-cut fence: Aluminium 2 digital stops with angular length correction, max 3.2 m

SCM SI15 with tilting saw Manufacturer: SCM Type: SI15F Year: M-Nr.: AB20182 Table Size: 1150 x 800 mm. Table Heigt: 800mm Sliding Table: Ja Main saw: 5,5 kW RPM: 3200 – 4500 – 6000 tpm Saw Blade Arbor: ø30 mm Saw Blades: ø350 Cutting Heigt: 115mm Blade tilting: 0 – 45° Cutting width: 850 mm Weight: 560KG

SCM Prima N67 AE032853 2010 Manufacturer: SCM 2010 Type: Prima N67 M-Nr..: AE032853 Year: 2010 Machine control: PLC Manager 100, PC Wincut software – Windows embedded 17″ TFT screen YouTube:

SCM S630 Nova 2009 Manufacturer: SCM Type: S630 Nova M-Nr.: 2009 Year: AB197855 Motor: 7.5 KW – 400 V Rpm: 4.500 rpm Cutterhead: Z-4 Tersa Cutterhead OD: ø120 mm Working width: 630 mm Working thickness: 3,5 – 300 mm Planing dept: max. 8 mm Table length: 1.000 mm Infeed roll: Steel sectionned with teeth Poutfee rolls: 2 rubber coated top outfeed rolls Feed: 5-8-12-18 m/min Weight: Ca. 700 KG

Schmalz Vacumaster tilting-hall crane mounting Manufacturer: Schmalz Type: Vacumaster Year: 2008 Lifting capacity: 250 KG horizontal lift 200 KG vertical lifting Control: Electro-pneumatic lifting Tilting: pneumatic Cups: 63 cm

Schuko ø200 5KW Booster Manufacturer: Schuko Type: Booster ventilator M-Nr.: NN Year: 2006 Specifications: Motor: 4 KW, 1.450 rpm – direct driven fan Suction diameter: ø200 mm Out: ø200 mm Capacity: 3.400 m3/hour Pressure: 2.800kPa

Schneidmaschine - Guillotine Schneider Senator SEN78 E-LINE Year 2000 - Serial-No. M-078E-004-10/30-09 Schnittbreite max. 780mm / Cutting width max. 780mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives

manuelle Rillmaschine - Perforiermaschine / manuel Creasing - Perforation machine Nut- und Perforationsmaschine / Creasing and Perforation machine Halin & Schächinger CP Serial-No. 2708 Arbeitsbreite / Working width max. 500mm Inklusive Nut- und Perforationswerkzeug / Include Creasing and Perforation tools Handbetrieb - Manuell Operation

Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year 03/2002 - Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW

Die PräLeg ist eine Buchblockbeleim- und Einhängemaschine zum Einhängen von Einzelbüchern in der Sortimentsbuchbinderei sowie für die Serienfertigung in Industriebuchbindereien und Druckereien.  The PräLeg is a casing-in machine for casing-in books in bookbinderies manufacturing short-run and widely varying size books, as well as for series production in industrial bookbinderies and printing works.  Bucheinhängemaschine / Casing-In machine Schmedt PräLeg HHS 1805 Baujahr / Year 2002 - Serial-No. 685 Buchhöhe / Book height: 80 - 340mm Buchbreite / Book width: 110 – 450mm Blockstärke / Book Thickness: 2 – 80mm Leistung / Output: Serienfertigung / Multiple production: ca. 200 - 300St/h Einzelfertigung / Single production: ca. 100 - 150St/h Elektr. Anschluss / Power supply: 200 - 240V(50Hz, O,6kW) Pressluftanschluss / Air supply: 6 bar

Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung. 

Number of conrods 1 Table dimensions ( x-y/mm) 950 x 660 Slide Dimensions X-Y (mm) 550 x 460 Stroke (mm) 20 - 160 Slide Adjustment (mm) 80 Shut Height (mm) 370 Stroke per minute 70 - 130 Motor Power (kw) 25 Features accessorized with soprem feeder width 400 mm 1250 kgmm Accessories beckoff control Machine Conditions ce marked

: 12 St. : ca. 90 kg : ca. 710x720x1000 mm drawer measurements: 600 x 600 mm Colour: 7035/5012 RAL Cabinet including assortment of dividers Large drawer usable space Full extension drawers (VA) 100% 8 drawers with internal height 40 mm 2 drawers with internal height 70 mm, 2 drawers with internal height 95 mm, 7 drawers with tray dividers and boxes 3 drawers with rail dividers 2 drawers with foam inserts Ball bearing drawer runners Individual pull-out stop Individual locking possible for each drawer Cabinet without key! Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shearing Joining & Fine Blanking Machine FM18-3100 cuts wood-based materials, veneers, chipboard, fibre and plastic panels, Hard paper, foils, thin metal sheets and acrylic glass - Angular, joint-tight and splinter-free The machine has been certified by the BG "Holz" in accordance with the principles for the Testing of the occupational safety of technical work equipment examined. It bears the "GS" mark for tested safety. -Operating instructions available

CONTROLS   PLC SIEMENS SIMATIC OP 27 PRESS DESIGN   table cushion: yes PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 1800 mm   table surface (front-back): 1000 mm SLIDE   stroke: 600 mm SLIDE (HYDR. PRESS)   return force: 38 to DIE CUSHION (TABLE CUSHION)   stroke: 200 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS   total weight approx.: 43000 kg

: 10 St. : ca. 90 kg : ca. 1020 x550 x1185 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic   quick die change system: yes   feedstock transport direction: right to left SLIDE   total force (nominal): 400 to   stroke: 200 mm COUNTER RAM   nominal force: 100 to   stroke: 30 mm V-RING   nominal force: 200 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 650 mm   lower table (front-back): 650 mm   shut height max.: 420 mm   passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 12 mm   feed velocity max.: 30 m/min   feedstock transport direction: right to left LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 60 mm   sheet thickness max.: 12 mm   sheet thickness min.: 1 mm   integrated feed function: yes STRIP-FEEDER   sheet width max.: 400 mm   sheet  ...

Power: 4 kW

Additional technical specifications: • Cleaning width: 350 mm • Brush motor power: 300 W • fresh water tank: 10 l • suction motor power: 400 W

• dimensions per storage field: 2200 x 1000 mm • capacity: 2500 kg

Maschinennummer: 831285, Schleifscheibendurchmesser: ca. 160 mm

SCHUNK KONTEC KSK 5-Axis Clamping System Manufacturer SCHUNK Model KONTEC KSK Condition untested Location 72589 Westerheim DE Lot 175

Additional technical specifications: • max. arm load: 200 kg • max. upright load: 1200 kg per side

BERG & SCHMID PBS 124 ESC Assembly Band Saw Manufacturer BERG & SCHMID Model PBS 124 ESC Condition untested Location 35614 Aßlar DE Lot 57

SCHUNK KONTEC KSK 5-Axis Clamping System Manufacturer SCHUNK Model KONTEC KSK Condition untested Location 72589 Westerheim DE Lot 176

Cutting capacity: round 230 mm, square 230 mm, flat material 280 x 150 mm Cutting speed 15 – 110 m/min Mitre cuts left 45°/60° Automatic workpiece feed Hydraulic lowering Micro Spray System Coolant Setup Hold-down device Roller conveyor

: gebraucht : 2010 : 080065 : prompt, Zwischenverkauf v : Deutschland : 29800 € : 1 : 2040 mm : 3 mm : 2 mm : 4.5 mm : Motorisch : 1.5 kW : 1.1 kW : 3060 mm : 1650 mm : 1500 mm : 2730 kg : 750 mm : 140 mm : 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5", color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R ...

CONTROLS   PLC SIEMENS S7 SLIDE   total force (nominal): 630 to TOOL DIMENSIONS   lower table (left-right): 900 mm   lower table (front-back): 900 mm   shut height max.: 900 mm

Description SALE A used CLT press in TOP 1 A condition Year of construction : 2021 A used PBA from SCM, exact data plus photos to follow Year of construction : 2018 Only both are sold together! ------------------------------- Plate size : Width = 3.50 m Length = 13.70 m Thickness = from min 6 cm – max. 40 cm Press pressure : 0 - 0.6 N / mm2 (we always work with approx. 0.45 N / mm2 ) Beleimung Oest : Year of construction: 2021 Total weight of press : approx. 110 tons can be dismantled in a screw system to 14 pressed trestles; 1 pc trolley + 1 pc Oest gluing The glue table can also be mechanically dismantled. Incl. the entire longitudinal slats and transverse slats mechanization fully automatic. Sale from location as seen without warranty and guarantee, without dismantling. Available approx. Nov Dec 2026 Plant ready for ...

Vertical sheet metal storage, drawer sorting storage for sheet metal, Hegla, 10 compartments for sheet metal 1.50m x 3m, – used - : Price from location: 4.500.-€ (net)! Manufacturer: Hegla Type: SCH-SL-3 Year of construction 03/2010 Maximum adjustment length 3,000 mm Maximum adjustment height 1,500 mm Number of compartments:10 compartments Load capacity 500kg per drawer (10 x 500kg) Max. loading height: 1,500mm Total dimensions LxWxH: 3,250mm x 1,590mm x 1,950 mm Condition: good Available: immediately Location: 87719 Mindelheim

faceplate diameter: 4500 mm swing diameter: 6000 mm turning height: 3500 mm Control: Siemens 840D distance between columns: 6500 mm column: max. travel: 19000 mm table load: 63 tons table rotation speed: 0,63 - 63 U/min cross-rail support horizontal: 7500 m/min cross-rail support vertical: 2500 m/min clamping table: 8000 x 5000 x 350 mm table load capacity: 25.000 kg/qm ram head dimension: 460 x 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m GANTRY – Double-column milling and turning centre with movable column Retrofitted and modernised in 2009 - Siemens 840D CNC control - Drilling and milling unit, speeds 25 – 2,500 rpm - Workpiece table 8,000 x 5,000 mm - Rotary table/face plate 4,500 mm - Angular milling head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer you a used refrigerated semi-trailer from Schmitz from a current recycling. Year of manufacture: 2019 / Registration date: 03.2019 Condition: Satisfactory FRC due Double deck Schmitz Refrigeration Unit Axles Schmitz SCB Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 39397 Gröningen The sale is without warranty Subject to prior sale

sheet width: 2520 mm plate thickness: 2.0 mm ST plate thickness: 3.0 mm ALU distance between columns: 2600 mm cutting angle: 2.0 ° no. of strokes: ca. 32 Hub/min weight: 1480 kg range L-W-H: 2892 x 1865 x 1430 mm Machine from a sheet metal shop Good condition () Features: - Robust, electric-motor-driven panel shear - Shatterproof, torsion-resistant welded steel construction - Compact and well-organized machine design - Electric-motor-driven backgauge With analog position display Manual fine adjustment from the front - 1x holding-down bar (continuous) - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gebr. Veneer Saw Joining and fine-cutting saw SCHEER FM2-3000 Saw unit: 2.5 hp (approx. 1.85 kW) Max. cutting length: 300cm Pressure beam adjustable by handwheel Angle stop on the left side rear side tables Saw is running. Sale in the current condition and unobsolete from carpentry dissolution (1-man operation). Fixed price.

Code: 0483 Brand: SCM Model: SANDYA UNO CCS Automatic compact 2-belt wide belt sander for furniture, custom-made furnishings, fixtures, doors, panels, composite materials and various Composition: 1° Group: Calibrating roller 2° Group: Combined Rubber Roller / Finishing Pad Automatic table lifting Working width mm 920 Working height mm 3 - 160 Abrasive belt dimensions mm 930 x 1525 Feed belt speed mt/min 4,5/9 Motor power Hp 10 Infeed and outfeed roller conveyors Automatic table positioning Oscillating belts Working pressure Atm 6 Exhaust hood diameter mm 160 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050

Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: MOSCA, Roller conveyor driven inclined conveyor -Type: SCHÄGFR.F. -Drive motor: Lenze 0.37 kW -Speed: 27 m/min -Roller width: 475 mm -Roller diameter: 50 mm -Axle spacing: 65 mm -Conveyor length: approx. 1500 mm -Base: height adjustable -Dimensions: 1530/710/H1040 mm -Weight: 143 kg

Six identical Rodenstock DNEye Scanner 2+ units are available, five of them available from January 2027, printer: black-and-white printer, screen type: TFT LCD touchscreen, screen size: 10in, WSVGA, 1024x600pixels, spherical measurement range: -20dpt to +20dpt at 12mm vertex distance, cylinder range: 0-8dpt, axis: 0-180°, pupil measurement range: 2-7mm, 3 zones, number of measurement points: 1,400points at 7mm pupil, measurement method: Shack-Hartmann, number of rings: 24, number of measurement points: 6,144, number of analyzed points: 100,000, diopter range: 37.5-56dpt, reproducibility: 0.03mm, method: Placido disc/keratoscope, measurement wavelength: 455nm, no UV light, measurement range: 150-1300µm, precision:

length: 1500 mm width: 700 mm height over floor: 850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1500 mm width: 700 mm height over floor: 85ß0 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Untha RS30 S Year of manufacture 2007 New set of knives with two knives on one disc! Motor 2 x 11KW Weight 1.3t 4 Waves Control cabinet Machine is immediately ready for use

Untha RS30 S Motor 2 x 11KW Weight 1.3t 4 Waves Control cabinet Machine is immediately ready for use