sc 17 used for sale

The Karl Schnell Type 046 KS FV-SERIES Emulisifer is designed for the fine art of fine emulsion; premincing, vacuumizing, mixing and emulifying all in one machine. Designed for the production of small batches, this machine of the FV-Serie complete thus the versatile KS offer which result in a constant quality level of the final product, creating of stable and homogeneous emulsions, flexibile applications and high productivity. This machine is previously used in a processed cheese plant in Europe. Hopper inside diameter 550 mm and inside height 400 mm. Volume of the hopper: ± 30 liter. The hopper has a direct steam injection nozzle, double jacketed and can handle vacuum. Motor: 4,1 / 8,2 / 14 kW - 120 / 230 / 400 V - 32 / 31 / 31 A - 710 / 1.440 / 2.550 rpm - 26 / 50 / 87 Hz. Simple control panel with buttons., Type of Machine: Emulsifier, Volume hopper: ± 30 liter, Motor: 4,1 / 8,2 / 1 ...

In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.04.2006 Category: Truck Body name: semi-trailer Exterior color: green Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Transmission: Manual Drive: Rear Certificate of Registration: EN403451

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

General SKU221Y083 LocationBarneveld Main Features MaterialStainless steel Volume50 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity50-80 l/h With motor0,75 kW (400 V 1415 rpm (215 rpm)) InletDN25 OutletDN25 Eccentric Screw Pumps MaterialStainless steel General MakeNetzsch SerialD4095257/6300005469/0100 Year of construction2021StarchOther chemicalRubberEccentric Screw PumpsAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsNetzschIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberPumps > Eccentric Screw PumpsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Ind ...

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: K Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 15,520 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 03 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Number of pallet spaces per row: 60 pcs. Total number of pallet spaces: 60 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 700kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 5,800 mm Depth: 1,100 mm 30x Pallet rac ...

used circular knife Schickart circular knife, replacement knife for Schickart bread slicer. Diameter of 25 cm.(Photo may vary)See pictures for details.

Knife Herlitzius (A 130) for bread slicerKnife (A 130) from Herlitzius for bread slicer, is used. Dimensions W.: 45 cm, H.: 28 cm (photo may vary)Herlitzius knives are known for their high quality and are often used in commercial bread slicers. Model A 130 presumably refers to a specific knife size or design that fits different machines. These knives are typically made of high-quality steel and need to be sharpened or replaced regularly to ensure a clean cut.

Herlitzius 91 Cutting Knife Sickle Knife for Bread SlicerFor Herlitzius 91 Bread Slicer, is used. Exterior dimensions W.: 51 cm, H.: 25 cm(photo may vary)The Herlitzius 91 impact knife (sickle knife) is a replacement knife for bread slicers, especially for Herlitzius brand models.Features:Type: Sickle knife (impact knife)Model: 91Material: High-quality steel for long durability and sharp cutting performance Use: Ideal for commercial and industrial bread slicers Compatibility:The knife fits various

Herlitzius 41 3 Impact Knife Sickle Knife for Bread SlicerFor Herlitzius 41 3 Bread Slicer, is used. Exterior Dimensions W.: 44 cm, H.: 20 cm(Photo may vary)The Herlitzius 41 3 Impact Knife (Sickle Knife) is a replacement knife for bread slicers, especially for models of the Herlitzius brand.Features:Type: Sickle Knife (Impact Knife)Model: 41 3Material: High quality steel for long durability and sharp cutting performance Use: Ideal for commercial and industrial bread slicers Compatibility:The knife fits various

Bread slicer Schickart TS 38Product descriptionManufacturer: SchickartType: TS 38Condition: used, functional, bakery conditionMaterial: stainless steelOn castors, mobilePower supply: 400 Volt / 0.75 kWDhe Schickart TS 38 is a bread slicer manufactured by the company Schickart. By using a bread slicer such as the Schickart TS 38, working time can be reduced and productivity increased. Details see pictures

Bread slicer Schickart TS / 30 plus stainless steel â Product description âœ" Manufacturer: Schickart âœ" Type: TS / 30 plus âœ" Condition: used, functional, baker's condition âœ" Material: stainless steel âœ" On castors, mobile âœ" Power supply: 400 Volt / 0.75 kW Details see pictures

Continuous conveyor  inclined conveyor Manufacturer : Lippelt Type : Inclined conveyor Year of construction : 2010 380 V 50Hz 0.12kW On castors Dimensions : W:77cm D: 157cm H: 126cm Belts width 60cm Details see picture    

A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine.

Year of construction/ retrofit 1995/2025 Bag in Box packaging machine (cartoner) Bosch, type CBK 409.1 BL / SCK 2500, year of construction 1995 (retrofit 2015) Folding carton formats (LxWxH): 143 x 60 x 218.5 mm 143 x 51 x 220 mm 143 x 46.9 x 219 mm 138.4 x 49.9 x 173 mm Condition: fully functional, well maintained Machine weight: 5600 kg Current formats: see documents Instruction manual: see documents

pressure: 200 t nominal power: 2000 kN stroke length max.: 1700 mm working feed: 50 mm/sec weight of tools max.: 50000 kg voltage: 400 V table-size: 4.800 x 2.400 mm total power requirement: 99 kW weight of the machine ca.: 113 t dimensions of the machine ca.: m passage width: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3740 Botec-Scheitza drill mount for auger and down-the-hole hammer drilling (max. diameter 130 mm), without impact mechanism (rotary motor only), 20 m drill rod 110 mm (without drill head) Drilling rig for worm and down-the-hole hammer drilling (max. diameter 130 mm), without impact mechanism (rotary motor only), 20 m drill pipe 110 mm (without drill head)

number of spindles: 8 spindle passage: 36 mm turning length: 250 mm spindle bearing diameter: 358,2 mm bar material dia.: 36 mm bar length: 4000 mm longitudinal slide -travel: 145 / 250 mm cross slide - travel: 80 mm spindle turning speed - stepless: 560 - 4000 U/min spindle motor: 28 kW Total weight, approx.: 8500 kg dimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm - Beckhoff CNC control system (Win2000) - IEMCA 4m bar feeder (PRA52/P-Typ42) + Hydraulic catch chute + Mechanical end-piece chute with container + Parts conveyor belt + 3–4 bar oil connection + 100 bar high-pressure connection + 1 HYDAC hydraulic oil cooler + 1 oil cooler for cutting oil + 1 chip conveyor + 1 magnetic roller for sludge removal + 1 new air conditioning unit for control cabinet / year of manufacture 2025 + Feed block: new brass strips fitted in 2023, making the machine as good as new + Spindle coup ...

An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software, and one replacement glass pane. Documentation available. An inspection on site is possible.

CONTROLS   electronic controls SCHMIDT PRESS FORCES   total force (nominal): 0.25 to PRESS TABLE   table surface (left-right): 180 mm   table surface (front-back): 150 mm SLIDE   slide force: 0.25 to   stroke: 100 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 35 kg This is an assembly press with force-displacement monitoring. • Operating hours: approx. 150 • Condition: very good, almost like new • Features: Press force monitoring, two-hand operation • Stroke: 100 mm • Tool dimensions: 150 x 100 mm • Press force: 0.25 tons

One used complete mesh ( standard, special and engineered mesh ) for sale, exesting of: One used JAGER SCHLATTER Superflex mesh welding line: The Superflex system processes all materials used in the reinforcing mesh industry and offers maximum design freedom with the programmable mesh linear extension. The system is equipped with motorized, infinitely adjustable compact welding groups that automatically adapt to the geometry of the next mesh. This feature enables seamless transitions and quick adaptation to changing production requirements. Variable cross wire spacings can be precisely implemented, making the system ideal for the production of list and special mesh. This versatility gives companies a clear advantage in the reinforcing mesh market and enables economical production with a high degree of flexibility. One used Progress MSR2 straightening/cutting machine is a high- ...

ITEM NO. AT100FU-EC - Year of construction 2017 - Flow rate 1 000 / 10 000 ltr./h - Speed 900 / 1 429 rpm - Thread DN 40 - 1 year functional warranty

A fully automatic cup filler for buckets is available. Design: rotary machine, lanes: 1, filling capacity: approx. 3000 cups/h, filling volume: 850ml/1000ml. The control system and the servo systems of the machine were dismantled and are missing. Documentation available. An on-site inspection is possible.

General SKU227Y123 LocationBarneveld MakeTerlet Type190 l. No.89-063 1 Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor7.5 KW Specified Features - Scraped surface heat exchanger Scraped surface heat exchangercheck Capacity190 l. Cylinder sizesø 570 x 1230 mm Max. temperature100 °C With jacket34 l. &: 2,6 l. InletDN50 OutletDN50 Motor7,5 kW, 380—415 V Speed± 66 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) With jacketcheck General Year of construction1989 Mounted on framelegs Floorspace1,20 x 0,90 m Total height2,40 m Weight1000 kg Extra Specifications6-arms scraperOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPIScraped surface heat exchangersOils & fatTerletIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > StarchIndustries > C ...

General SKU322X550 LocationBarneveld CEcheck Main Features Volume50 Ltr. Specified Features - Rotary evaporator MaterialGlass General MakeGenser Scientific TypePILV50-DRV Floorspace1,30 x 0,90 m Total height2,25 m Extra SpecificationsInstallable rotating bottles, 6, 10, 20 and 50 l.Disstillation performance of water at 60 degree C,m heating bath temperature, approx 6,5 l/hWith:Rotary piston 50L and lifting deviceFlange with a nominal width of 120mmElectronic drive unitCooler with 1.2m² cooling surfaceReflux device. mechanical seal systemStainless steel heating bath. Speed controller with displayVacuum regulator. anti-implosion hoodDistillate vessel, capacity 20LHeating bath and steam temperature controllerTrolley for PILOTVAP-50Vacuum pumpTea, herbs & coffeeFine chemicalsBiotechnologySpicesFeed additivesSolventsDetergent & surf.Food additivesLubricants & oleoAnimal feedCon ...

Key data: 6 mm

Used Schütte SF32 Multispindle Automat Lathe with large number of spare parts and accessories! We sell 3 pieces of Schuette machines, with total 16 pallets of spare parts and accessories. More photos is added soon. Please ask more information if interested. Schuette SF32 - 6-Spindel - Drehspindelstillsetzeinrichtung - Schnecken Späneförderer - Gewindeschneideinrichtung mit Rücklauf

Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Three phase transformer -Type: D 32/20 50/60 Hz 6000 VA -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A -Secondary III: 3x 18 V 10 A -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg

Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers -Manufacturer: Schuhmann, switching amplifier -Type: SV 5.20G-312 -Price: per piece -Number: 4 piece -Dimensions: 80/23/H105 mm -Weight: 0.1 kg/piece

Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers -Manufacturer: Schuhmann, digital frequency-analog converter -Type: DFA 8.00G -Dimensions: 80/23/H105 mm -Weight: 0.1 kg

Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers -Manufacturer: Schuhmann, universal isolating amplifier -Type: UT 1.00G -Price: per piece -Number: 6 piece -Dimensions: 80/23/H105 mm -Weight: 0.1 kg/piece

Auxiliary switch, circuit breaker, fuse, circuit breaker, circuit breaker, control module, Standard - Control unit, direct starter, reversing block, reversing block, basic unit -LUCA12 BL: Control unit -LUB120: Basic unit -LU2MBOBL: Turning block -Number: 8 control modules available -Price: per piece -Dimensions: 260/45/H185 mm -Weight: 1.6 kg/piece

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor -Manufacturer: Indramat, motor from machining center Schleicher WV-SYS 160-1050 -Type: MAC112B-1-PD-2-C / 130-A-1 / S005 -Speed: 1500 rpm -Brake: 14 Nm DC 24 V -Shaft: Ø 32 x 60 mm -Number: 2x motors available -Price per piece -Dimensions: 550/210 / H250 mm -Weight: 38 kg

Lifting table, lifting platform, lifting platform, car lifting platform, scissor lifting platform, cleaning bridge, scissor bridge, lifting device, material lifter, lifting device -Manufacturer: Schmidt Handling, lifting device -Load capacity: 100 kg -Lifting height: 725 mm -Platform: 545 x 285 mm, tiltable -Dimension: 400/380 / H1260 mm -Weight: 205 kg

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece

Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate -Cutter: IC60N circuit breaker 8 pieces -Cutter: LUCA05BL standard control unit 2 pieces -Cutter: IOF auxiliary switch 5 pieces -wöhner: 01 240 connection terminal plate -wöhner: rail supports 3 pieces -Price: complete -Dimensions: 690/200/H200 mm -Weight: 9.9 kg

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter -LUCA 12 BL standard control unit: 5 pieces -LUB12 direct starter basic device: 5 pieces -wohner: connection terminal plate -Price: complete -Dimensions: 395/240/H220 mm -Weight: 8.1 kg

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches -Schneider Electric: Type NSX 160L LV429372 -Rotary drive with: extension -without: gear knob -Terminal cover: 1 -Dimensions: 240/105/H575 mm -Weight: 2.9 kg

Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate -Cutter: Multi 9 circuit breaker -wöhner: QCC switch-disconnector -wöhner: busbar adapter/busbar support -wöhner: 01 240 connection terminal plate -with: fuses -Price: complete -Dimensions: 550/200/H140 mm -Weight: 6.5 kg

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversing block -LUCA 12 BL standard control unit: 6 pieces -LUB120 direct starter basic device: 6 pieces -LU2MBOBL reversal block: 6 pieces -wohner connection terminal plate: 2 pieces -Price: complete -Dimensions: 440/280/H200 mm -Weight: 12 kg

Stacking boxes, stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, Euro stacking containers, small load carriers, storage boxes, shelf boxes -6620x Storage bins: various sizes -771x storage bins Dimensions: 550/174/H110 mm -3483x Storage bins Dimensions: 175/135/H110 mm -2112x storage bins Dimensions: 275/175/H110 mm -30x storage boxes dimensions: 138/86/H110 mm -172x storage bins Dimensions: 174/136/H96 mm -56x storage boxes dimensions: 274/174/H96 mm -Sale: only complete

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders, short-stroke cylinders -Schura Pneumatic Order No.: 1 206 100 1/150 -Stroke travel: 150 mm -Piston diameter: 40 mm -Piston rod: 14 mm Price: per piece Quantity: 4 pieces -Dimensions: 315/58/H58 mm -Weight: 1.55 kg/piece

Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper blade, condition as shown in photos (one is missing) -Sign height: approx. 1100 mm -Conversion to three-point linkage for tractors or forklift pockets for forklifts and wheel loaders is possible for an additional charge. -Transport dimensions: 3200/1200/H1200 mm -Weight: 870 kg

Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -electric heating -Manufacturer: Schniewindt -Type: 97/DF 15 -Power: 15 kW -Connection: DN30 in stainless steel -permissible operating pressure: -centrifugal pump -Manufacturer: Tamel 2.2 kW -Number: 2x systems available -Price: per piece -Dimensions cabinet: 940/740/H1870 mm -Weight: 406 kg

Pneumatic press, pneumatic punch, multifunction punch, punch, universal punch, punching machine -for window construction: tools -pneumatic: with foot control -with various tools: -pneumatic: operated -Air pressure: 8 bar -Pressure force: about 3.2 ton. -Stroke max.: 20 mm -Dimensions between stands: 250 x 200 mm -Dimensions: 505/510/H1360 mm -Weight: 90kg

Positioning ring, clamping ring, clamping pallet, short taper, shuttle table -Type: SRB 120 -for: NSA plus static tethering station -both sides: ground -Clamping rings: with ground short cone for positive locking connection of the clamping pallets or devices with the clamping modules. -Form-fit connection: between clamping pallet and NSA plus clamping station. -Quantity: 25x available Price: per piece -Dimensions: Ø 118/H19 mm -Weight: 0.8 kg

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outside saw blade: Ø 250 mm -Height: 4 mm -External cutter: Ø 237 mm -Height: 18 mm -Take: Ø 80 mm -1x: right -1x: left -Price: complete -Weight: 9.1 kg

Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm -A conversion to a three-point attachment for tractors or drive-in pockets for forklifts and wheel loaders is possible for an additional charge -Transport dimensions: 3300/1400/H1570 mm -Weight: 905 kg

Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 200 x 20 mm -Dimensions: 520/250/H160 mm -Weight: 42 kg