sc 17 used for sale

max. temperature: 1000 Grad size of opening: 170 x 90 mm depth of chamber: 280 mm total power requirement: 3 kW weight of the machine ca.: 80 kg dimensions: 0,7 x 0,55 x 0,72 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

Frount group box, for engine 3412 Part number: 1729315

Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

BUTTER CHURN EGLI CAPACITY TANK : 1700 L CREAM CAPACITY : 850 L BUTTER OUTPUT : 425KG

PRODUCT DESCRIPTION MANUFACTURER: Westfalia TYPE: MSE 25-01-177 YEAR: 2011 CAPACITY: 2500 Lt/h MACHINE COMES WITH: Tools and instructions book.

Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

WESTFALIA KDA 16-02-177 QUARK & YOGHURT SEPARATOR CAPACITY: 1.000 KG/H PRODUCT SOME PARTS ARE MISSING PLEASE CONTATCT FOR MORE INFORMATION

Stock # U2397-4 Used stainless steel micro cutter/emulsifier by Haarslev A/S (DK) model HF 175. Machine is designed for emulsifing a product, paste type. Can run on meat, chicken, pork etc. Output depends on product and can reach 3-4 tons per hour. Feeding inlet into milling chamber has diameter 105 mm. Machine has stainless steel shaft driven directly by el motor 55 kW, 2950 rpm, 380 V, 50 hz. On the shaft there are mounted two sets of six blade knives and screens. First screen has diameter of holes 1.2 mm. Second screen has holes with diameter 0.8 mm. Knives and screens are designed in non-corrosive steel. Body of milling chamber designed in stainless steel. Discharge via outlet with diameter 65 mm. Machine has local control panel and is mounted on four legs. Includes technical documentation. Last time used in food industry.

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

3 pcs. Pfeiffer Balzers TPU 170 (turbomolecular pump) 3 pcs. Pfeiffer Balzers TCP 120 (controller for TPU 170) 3 pcs. cable for TPU 170 1 pcs. Alcatel Type 5150 (turbomolecular pump) 1 Alcatel CFF 100 (controller for type 5150) 1 Alcatel 5030 CP (turbomolecular pump) Price plus 19% VAT Not tested for functionality. Please see photos for technical data. Can also be picked up.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.

; Gross weight [kg]: 2760; Engine: Rehlko KD83L06T-AA56B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 344

Approved for HVO use; Gross weight [kg]: 1490; Engine: Rehlko KD39L04T-AA56; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: cooland heater and battery charger; Water Tank Volume [l]: 181

; Gross weight [kg]: 510; Engine: Rehlko KDW1404; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 50

Used shredder / shredder from Moco type AZ 17E/1210. Shredder MOCO AZ 17E, shredder with slow and quiet toothed working shafts. Low vibration and minimal maintenance, compact Robust welded structure, low power consumption, Individually interchangeable cutting discs. Very good inlet behavior, even for large bodies. High degree of fineness. The material is stopped by an optional sieve inside the cutting chamber for repeated shredding until its dimensions are smaller than the sieve openings. The control of the AC gear motors is equipped with an automatic overload-dependent reverse adjustment. BANDWIDTH EXAMPLE 15 to 18 cubic meters of loose mixed waste per hour. DIMENSIONS • Cutting section 932x912mm • External dimensions 2440x1112x730mm • Weight 4600 kg. • Drive power 2×15 kW • Voltage 400V/50Hz Year of manufacture 2010.

Beck Series Packer SX 1750

chamber volume: 170 liter useable volume: -- liter friction: -- motor drive power: 800 kW Condition: used - Specification: internal mixer used as additional option: Rubicon batch-off plant - capacity approx.: 170 litres - rotor model: tangential design - drive controller: Allen Breadley - Control: Mitsubishi - Motor speed: 1,000 rpm - Gearbox: Panamax 9000 make Sumitomo - Rotor speed: 5.6 - 55.6 rpm - Chamber hardness: 45 -50 HRC - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz - Moror make: Teco - Output: 27 tons/day - Cycle time approx.: 4 - 8 min - Height approx.: 7,500 mm - Weight approx.: 35,000 kg, incl. gearbox and motor Available as an option: - Batch-off system Make: Rubikon / Mattech - Cooling bars max.: 300 mm / 2x 80 mm The data for this ad was created with ModulMWS - the software solution  ...

Rheon KN-171 encrusting machine The new Cornucopia® KN-171 was designed to specialize in confectionery. Even more compact than former models, the KN-171 boasts versatility and adaptability. And the possibilities keep expanding. Flexible product weight, filling/dough ratio and length Description: Output: 1200~max. 6000 pcs./h At conveyor’s up and down mechanism: 3600 pcs./h (differs according to product weight), Capacity: max. 180 kg/h Product Length Range (cylindrical) no limitation Product Weight Range (spherical) 10~90 g Dimensions:1516x874x1360 mm. Call and make an appointment for the Machine show!

Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 33 x 170 mm -Length: 1485 mm (1 x 855/630 mm each) -Weight: 44.6 kg

Three-phase motor, electric motor -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B14 -Protection class: IP54 -Dimensions: 355/115/H150 mm -Weight: 15 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 29 x 171 mm -Length: 1570 mm (1x 650/500/420 mm each) -Weight: 41.2 kg

Three-phase motor, electric motor -Transfer: in the current condition as seen -Slight damage: on the fan housing -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B5 -Protection class: IP54 -Dimensions: 360/140/H150 mm -Weight: 16.7 kg

Heavy-duty castors, heavy-duty wheel, tire, forklift drive wheel -Surface: PU -Wheel size: O 170 x 75 mm -Inside: O 55 mm -Inside: O 85 mm cone -Price per piece -Quantity: 2 pieces -Weight: 7.3kg/pcs

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 176 teeth -Number: 20x saw blades available -Price: per piece -Weight: 10 kg/piece

Bezel, setting stick, lynette -Intermediate plate for: bezel -Prism size: 33/38 mm -Height: 71 mm -Drawings: with the photos -Dimensions: 345/175/H71 mm -Weight: 32 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Boret: Ø 20 mm -Dimension: Ø 176 x 140 mm -Weight: 12,6 kg

Container corner fitting, container corner, container parts -Number: 18 corner fittings available -Price per piece - Die stamping: DL TR 08 1118 / DL BR 08 1124 -Height: 160mm -Dimensions individually: 178/120/H160 mm -Weight: 11kg/pcs

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 250/172 mm -Height: 20 mm -Pitch circle: Ø 202/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 73x pillows available -Price: per piece -Weight: 0.5 kg/piece

Access ramp set -Driveway width: 170 mm -Height: 230 mm -Dimensions: 810/290/H270 mm -Weight: 10 kg

Electric motor, three-phase motor -Lenze: GFT 100-2 (0.6 kW 800 rpm) -Power: 0.6 kW -Speed: 800 rpm -Lenze fan: S2E 170 (0.05 kW 2500 rpm) -Shaft: Ø x L 28 x 60mm -Construction: B3 -Dimensions: 710/260/H200 mm -Protection class: IP54 -Weight: 31.5 kg

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 250/170 mm -Height: 33 mm -Number: 2x pillows available -Price: per piece -Weight: 2.6 kg/piece

Copy part head, copy head, part head -Copy head rail for: lathe -Dimensions: 100/81/H1747 mm -Weight: 43 kg

Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving -Width: 1700 mm -Depth: 760 mm -Height: 1780 mm -Storage shelves: 4 -Price: per piece -Number: 1 pieces -Weight: 84 kg/piece

Window transport trolleys, sash transport trolleys, platform trolleys, transport trolleys, heavy trucks, table trolleys, assembly trolleys -Intermediate dimension: mm -Heavy load: transport trolley -Number: 1 piece car available -Price: per piece -External dimensions: 1775/640/H1800 mm -Own weight: 144 kg

Electric motor, three-phase motor -Power: 0.3 kW -Speed: 1330 rpm -Construction: B14 -Protection class: IP 65 -Dimensions: 247/140/H200 mm -Weight: 7 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -Width: 1750 mm -Length: 1750 mm -Height: 80 mm -milled from all sides -Number: 2x plates available -Price: per piece -Weight: 2000 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1760 mm -Length: 2400 mm -Height: 840 mm -partly with threaded holes -Plate thickness: 50 mm -with supporting ribs -Transport dimensions: 1760/2400/H840 mm -Weight: 2000 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1755 mm -Length: 2410 mm -Height: 845 mm -partly with threaded holes -Plate thickness: 35 mm -with supporting ribs -with vice -Transport dimensions: 1800/2560/H1000 mm -Weight: 2000 kg

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 175 mm -Length: 165 mm -Height: 220 mm -Table: 175 x 165 mm -Groove width: 14 mm -Weight: 13 kg

- technically efficient, ready to work - after full service - motor power: 0,5 kW - disc diameter: 175 x 20 mm, 95 x 20 mm - pneumatic profile clamping

Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg

Bezel moving, moving bezel, steady rest, lynette -Max. Passage: Ø 175 mm -Condition: Gunmetal -Center height: 310 mm -Drawings with the photos -Number: 1 piece available -Dimensions: 590/70/H540 mm -Weight: 36kg

Three-phase motor, electric motor -Power: 0.12 kW -Speed: 2750 rpm -Shaft: Ø 10 mm -Construction: B14 -Flange: Ø 80 mm -Price: per piece -Number: 1x available -Dimensions: 235/142/H180 mm -Weight: 4 kg

Electric motor, three-phase motor -Power: 0.76 kW -Speed: 3000 rpm -Shaft diameter: 14 mm -Construction: B5 -Protection class: - -Dimensions: 285/195/H215 mm -Weight: 10 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 175 mm -Edition: plastic -Tip height: 250 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 560/100/H580 mm -Weight: 25 kg

Gear motor, electric motor -Speed: 85 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 410/200/H205 mm -Weight: 17.4 kg