sc 17 used for sale

PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control -Type: Modicon TM241CEC24T -Input module: Modicon TM3DI8 -Dimensions: 175/90/H100 mm -Weight: 0.6 kg

PLC controller, electronic module, PLC control -Manufacturer: Schneider Electric, PLC control -Type: Modicon TM221CE24T -Number: 2x controllers available -Price: per piece -Dimensions: 110/105/H75 mm -Weight: 0.4 kg/pc.

Key data: 10 t, 300 mm, 300 mm

more info on request

standing PE tank, sulfuric acid tank. Flat bottom Volume: 16.7 m³ Dimensions: Ø 2.57 m x 3.90 m high

standing GRP tank, polyester tank, with feet Volume: 35 m³ Dimensions: Ø 3.00 m x 5 m high

Mounting bracket adapter, cross table, for mounting three-jaw chucks, three-jaw lathe chucks -Manufacturer: Scheelen, clamping bracket for lathe -Photo: Short cone 6 -Groove: 70 x 13 mm -Dimensions: see photos -Dimensions: 300/185/H180 mm -Weight: 26.3 kg

upright GRP tank, polyester tank, with bottle bottom, with two domes (on top of the tank and on the side of the spout) Volume: 40 m³ Dimensions: Ø 2.90 m x 6 m high

horizontal stainless steel tank, can be ordered with 6 brackets Volume; 85 m³ Dimensions: Ø 3.10 × 12.0 m long

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Schneider Electric, housing for crane remote control / pendant control -Type: XAC-A08 -Transport dimensions: 560/80/70 mm -Weight: 1.1 kg

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

upright stainless steel tank with flat bottom Weight: 3 tons Volume: 43.5 m³ Dimensions: Ø 3.10 m × 6.15 m high

Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, beveled -Slot width: 25 mm -Dimensions: 320/65/H40 mm -Weight: 3.8 kg

upright stainless steel tank, flat bottom Volume: 15 m³ Dimensions: Ø 2.60 m × 3.40 m high

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Industrial Ethernet Switch, Network Switch, Lan Switch -Manufacturer: Siemens, Simatic Net Industrial Ethernet Switch 16-port, unused, original packaging -Type: Scalance X216 6GK5216-0BA00-2AC2 -Accessories: incl. DVD Simatic Documentation -Cardboard dimensions: 200/200/H200 mm -Weight: 1.1 kg

Key data: 225 KW, 1500 1/min

Scania engine DC09-63A fuselage engine from Schnell CHP completely overhauled in exchange. Old engine must be break-free and crack-free + repairable. MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven Germany Phone: 0049 4281 950583 infoatmiw-zeven

upright stainless steel tank, incl. agitator Volume: 6 m³ Dimensions: Ø 2.24 m × 2.80 m high incl. agitator, cylindrical height 1.54 m

PLC controller, electronic module, PLC control, analog input/output module, temperature input module -Manufacturer: Schneider Electric, PLC controller Analog input/output module -Type: Modicon TM3TM3 -Quantity: 1x control unit available -Dimensions: 95/90/H30 mm -Weight: 0.1 kg

Serial Number: 482 Construction year: Fbr 2000 Weight: +/- 2,1 tons Power: kW 13 Air pressure: 7-8 Bar Length mm: 7300 Width mm: 1200 Height mm: 2400 Working height: 750mm Transport size L x W x H: 2,5 x 1,2 x 1,2 in mm Maximum speed: 4 m/min Min.-max. glass thickness: 3 - 35mm Min.-max glass size: 100 x 100 -2000 x 3000mm Number of spindles: 7 spindles Condition machine : Excellent Control type: Semi-automatic Electric. Connection: 32A 3P+PE Photos/film available: Photo's available

upright stainless steel tank Volume: 6 m³ Dimensions: Ø 2.40 m × 1.90 m high

horizontal stainless steel tank, double-walled, insulated, oval, with feet Volume: 5.2 m³ Dimensions: Ø 2.05 m wide × 2.80 m long x 1.80 m high incl. feet

upright stainless steel tank, incl. agitator Volume: 3.3 m³ Dimensions: Ø 1.66 m × 2.50 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³

horizontal stainless steel tank, oval, with feet Volume: 2.3 m³ Dimensions: 0.70 m wide x 2.30 m long x 1.50 m high and 0.20 m high feet, total height 1.70 m

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 8.2 m -Connector: 2-pin -Transport dimensions: 380/380/H90 mm -Weight: 3.6 kg

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg

Draw tube, draw rod for step chucks, precision chucks, quick-release chucks, collet sleeves, collet chucks, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, pull rod for quick-release chucks -Recording: M24 -Dimensions: see photos -Dimensions: Ø 150 x 525 mm -Weight: 3.3 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step Collet Ring Chuck -Hole: Ø 25 mm (see photos) -Size: 22 to 87 mm -Dimensions: Ø 96 x 110 mm -Weight: 1.1 kg

upright stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Outlet under the tank with flange Ø 4.5 cm Outlet at the bottom of the floor Ø 6.5 cm, without tap

John Deere 1505 Series II implement carrier, 4 cyl. diesel engine 31 kw/42hp all-wheel drive, continuously variable hydrostatic drive, differential lock, adjustable steering column, cab with air conditioning (function not tested), comfort driver's seat air suspension, data confirmation DEKRA for ABE available. Equipment: None Optionally available: Schell front sickle mower FSM 3000H (rear discharge) Working width 300 cm (middle 180 cm + sides 60 cm each) Side mowers can be moved up / down by approx. 12 cm, automatic switching on and off of the side mowers when lowered/raised. Height adjustment from approx. 25mm to 110mm Sliding plate under the blade as collision protection 4 support rollers in the mower housings and front in the middle as anti-scalping rollers Extras: 3 casters Identical machine with front mower Fastback Commercial 118 (3 m) for sale as well as other mowing ...

Stainless steel tank, upright, cube Volume: 1 m³ Dimensions: 1.0 m wide × 1.2 m long × 1.60 m high

sheet width: 3000 mm plate thickness: 3 mm weight of the machine ca.: t 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 4 m -Connector: 4-pin -Transport dimensions: 320/320/H80 mm -Weight: 2.3 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 3.8 m -Connector: 2-pin -Transport dimensions: 300/300/H90 mm -Weight: 1.8 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 8.3 m -Connector: 4-pin -Transport dimensions: 340/340/H120 mm -Weight: 3.6 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 7.7 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 4.7 kg

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

large working width: 2040 mm for iron sheets up to approx.: 1 mm Dimensions: 2650 x 650 x 1180 mm Weight: approx. 680 kg

200 m pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 18,000,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 324 pcs. beam, length 3.6 m, 4000 kg ballast/compartment + 648 pcs. Suspension locks + 220 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg

Speedometer unit -Manufacturer: Renault KBA to2): -3004 -Model: Scenic KBA zu3): 575 -Model Type: 1.6 16V ABS: Yes -Transmission Type: Manual -Engine code: K4M 700 -Fuel type: Petrol -Year of manufacture from: 09/1999 Power kW: 79 -Year of manufacture up to: 08/2003 Engine capacity cc: -1598

Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Weight: 170 kg

1 used pallet rack; Make: SSi-Schäfer Type: PR600 Year of construction: 2010 Longitudinal truss rack Max. Field Load: -approx. 529 pieces of stand frame Frame height: approx. 10,300 mm Frame depth: 1,100 mm; profile: P120 / 100 / 2-3, galvanized - approx. 5,544 trusses; Truss length:3,700 mm Profile CE 160/50; galvanized Structure can be individually designed. Reserved for intermediaries Disassembled plant is located in our warehouse in Eitorf Transport and assembly can be offered separately. You are welcome to view the material in advance. Price on request!

Key data: 630 mm, 240 mm, 7 kW

SPECIFICATIONS: Max. machining width mm: 630 Max. working height mm: 240 Installed power: 7.5 KW Feed speed: 6-18 m/min Roller with 4 blades Voltage: 380 volts Manual operation

GRP tank, upright Volume: 23,000 l Dimensions: Ø 2.00 m × 7.50 m high Spout: DN80