sc 17 used for sale

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

Drawing blades serve as tools for the fine removal of chips, for removing old paint layers and for cleaning contaminated surfaces. Pull blades are usually not functional when purchased, but only a piece of steel sheet. In order to function, a fine ridge must first be sanded. We offer fully functional drawing blades of 0.4 mm and 0.5 mm Swedish steel for new purchases. If necessary, we will gladly grind your "used" or "new" drawing blades and let them come back to you functionally. Contact us. We would be happy to provide you with a new range of re-energised blades - ground or unground and/or a grinding offer. We would be happy to provide you with further information regarding drawing blades.

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

Motor 0 hours of operation (storage engine)

Poly Clip Single-Clipper, suitable for artificial and natural casings, bags and nets The machine is immediately available and can be tested in Koblenz, Germany.

3 tube feet standing stainless steel container made of V2A, 1.4301 WSt Containers with upper edge reinforcement Manufacturer: API Schmidt-Bretten Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: approx. 1,560 mm Open top containers. Container with lower convex base on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 In very good condition!

Shelves for shelves, SSI Shepherd R3000 / R4000, depth 30cm, 40cm, 50cm, 60cm and 80cm, width 1m and 1.28m - used - : Width approx. 1m Price per piece: 40cm = 5.-€ (net) 50cm = 5.-€ (net) 80cm = 8.-€ (net) Width approx. 1.28m Price per piece: 40cm = 7.-€ (net) 50cm = 7.-€ (net) 60cm = 8.-€ (net) Manufacturer: SSI Schäfer Type: R3000 / R4000 Year built: unknown 30cm x 1m x 3cm height= 547 pieces (there is also a larger post in it) 50cm x 1m x 3cm height= 989 pieces 50cm x 1.28m x 3cm height= 38 pieces 60cm x 1m x 3cm height= 16 pieces 60cm x 1.28m x 3cm height= 512 pieces 80cm x 1m = a larger post comes in Payloads per shelf: 1m = min. 100kg 1.28m = min. 150kg Condition: good Available: from approx. Mid / end of October 2020 Location: Frankenberg Camp (Saxony)

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

Large items of office furniture includes: -Tables and cabinets made of wood -Tables and cabinets made of steel/plastic In very good condition!

New lathe. Distance between centers: 1500mm. Swing: 510mm. Swing over carriage: 320mm. Swing over gap: 760mm. Spindle hole: 80mm. CE protections and certificate. Equipped with chuck and steady rest.

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.

We sell a reconditioned Scania DC 16 43 A (industrial engine). Before overhaul, the engine had 6600 hours.

Bottle filler for the semi-automatic filling for pasty products. Suitable for products such as e.g. yoghurt, oils, cosmetics etc. in cups, bottles, canisters, cans or similar containers. The to be filled container is placed under the filling head, the product is sucked through a tube from the filler and discharged volumetric. Full pneumatical version without electronics. The filling pulse is triggered by a pneumatic foot switch. Replacing the foot switch with pneumatic components such as a photocell or an external pulse, this filler can be integrated in existing fullautomatically systems. Capacity: 600-1.200 filling strokes per hour (depending on e.g. by product volume, filling speed, operating personnel, etc.) Number of filling stations: 1

for manual cutting of punched oil carton stencils, with autom. Cardboard feed, font size 7/8inch = 22 mm with the letters of the alphabet, numbers and all common Punctuation.

manual production of punched oil carton stencils, with autom. Cardboard feed, with large handwheel for simple operation, with the letters of the alphabet, numbers and all common punctuation marks Font size 1/2 inch = 13 mm

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Scania DC 16 43A industrial engine, 7000 operating hours, used and functional.

New machines: Chocolate tank, dissolving agitators, Temperature control machines, chocolate pumps. Various sizes and services, stainless steel, very good quality. We are a sales and service partner for MASSA in German-speaking countries.

Scania diesel engine for generator drive, DC13-073A; Variable continuous power (PRP) 326 kW at 1500 1/min. (New)! Retail price: 19.000,00

We offer: Chamber furnace, 1 m³ maximum temperature: 1420° Atmosphere: reducing or oxidizing (both can be used) with CO Analyzer Fiber lining in TOP condition. Including cabinets with rod control (can also in a Siemens control system be converted). The plant is in a very good condition. Offer price: Including delivery free House Germany, installation and commissioning.