sc 17 used for sale

incl. spare bulbs

Siemens Simovert, P SC6025-1AA01, Type D165 D165/25 M5REQ Not checked for functionality. Sold only to traders!

Panel gluing line Drawing number: PVP-00-00-00-1165 ELECTRO-OIL-HYDRAULIC DESIGN with electric heating plates Clamping size: 3,000 x 1,300 mm Maximum wood thickness: 70 mm Minimum wood thickness: 4 mm Fed with: 10 pcs hydraulic cylinders ø35 x 95 mm stroke (Press force max. at 200 bar = 1,900 daN) with fold-up thrust pieces for narrow Workpieces 3 hydraulic cylinders ø60 x 250 mm stroke for operating the upper heating plate (Press force max. at 160 bar = 5,000 daN) 1 pc. pressure control valve for the upper heating plate 1 pc. pressure control valve for the press cylinders 1 infinitely adjustable timer for automatic opening of both the heating plate and also the hydraulic cylinder Technical data of the heating plates: ELKOM - Electric heating plate made of aluminium in sandwich structure Maximum usable temperature: 120°C Surface hard anodized Power consumption: ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wide belt sander SCM Sandya 40 M1 year of construction 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table       Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disc brake Rubber coated pressure rollers Automatic carpet centring Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Modular ice flake production plant with a maximum capacity of 2500 kg/24 h With semi-hermetic compressor With remote air-cooled condenser Stainless steel screw and freezing cylinder (evaporator) Electromechanical control panel Special reinforced alloy icebreaker, which allows for higher pressing force, resulting in a drier quality ice (85% dryness) Long life stainless steel bearings Gearbox current protection, safety clutch between gearbox and pulley Low water level sensor Ice level thermostat Removable stainless steel side panels for easy servicing PS plastic cover Ice chute with extension Reduced height CFC free R-404A refrigerant

inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/min drive motor: kW distance spindle - column: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3500 SSI Schaefer EURO-Dimension 643-66 Features • Material: High quality polypropylene (PP) • Color: Blue / Gray • Volume: 60 litres • External dimensions: 600 × 400 × 320 mm • Internal dimensions: 570 × 370 × 305 mm •Ultimate load: o Static: 40 kg o Load (stacked): 180 kg • Temperature resistance: -30 °C to +60 °C • Weight: 2.8 kg • Foldable: Yes (reduces volume by 81%) • Floor & Walls: Closed • Handle: Handle-through handle for easy transport Price € 14,- net excl. VAT • Quantity discount: € 11 per piece when buying a pallet (100 pcs.) • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment The box in EURO size 643-66 without lid (60 l) from Schäfer Shop is a robust, stackable plastic container, ideal for storage and transport in indust ...

spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mm capacity 90 degrees: round: 102 mm capacity 90 degrees: square: 90 mm capacity 90 degrees: flat: 120x80 mm capacity 45 degrees: round: 90/80 mm capacity 45 degrees: square: 80/70 mm capacity 60 degrees: flat: 90x70/85x70 mm total power requirement: 1,5/2,0 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,5 x 1,05 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315/350 mm capacity 90 degrees: round: 125 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 160x90 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 90 mm capacity 60 degrees: flat: 80x100 mm total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,6 x 1,22 x 1,06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 330 mm : 330 mm : 400x330 mm saw band length: 4570 x 34 x 1,1 mm table height: 800 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 2,35 t dimensions: 2,23 x 2,15 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,44 t dimensions of the machine ca.: 0,8 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 330 mm : 450x320 saw band length: 4250x34x1,1 mm band speed: 40 + 80 m/min table height: 845 mm saw band width: 34 mm total power requirement: 2,2 kW weight of the machine ca.: 0,985 t dimensions of the machine ca.: 1,4 x 2,0 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 460 mm : 460 mm : 460 x 460 mm saw band length: 5450 x 41 x 1,3 mm table height: 800 mm band speed: 20 - 100 m/min total power requirement: 5,5 kW weight of the machine ca.: 3,2 t dimensions: 2,675x 2,15 x 2,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 510 mm capacity 90 degrees: square: 480 mm : 610 x 450 saw band length: 5320 x 34 x 1,1 mm band speed: 15 - 100 m/min table height: 820 mm total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,8 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 940 mm total power requirement: 1,5 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 25 - 80 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 + 70 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 110 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 200x60 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 140x60 mm total power requirement: 1,5 kW weight of the machine ca.: 130 t dimensions: 0,8 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1,5 kN stroke: 40 mm throat: 70 mm Working height from to: 75 - 170 mm table surface area: 115 x 70 mm weight of the machine ca.: 11 Kg dimensions: 115 x 175 x 290 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HF welding machine

Superset NT 31 with 14 axis control and 1000 programs Feed rollers in front of the dressing spindle Position 1 - Dressing spindle Position 2 - Right spindle with 2 axis ( up / down ) Position 3 - Left Spindle Horizontal Top with 3 Axis (Up/Down and Diameter Setup) Position 4 - First Horizontal Spindle with 2 Axis (On/Off and Diameter Setup) Up/Down Coupled with Position 5 Position 5 - Second Lockers Horizontal Top with 3 Axis ( Up/Down and Diameter - Setup ) Position 6 - Second Spindle Horizontal Bottom with 2 Axis ( Up / Down ) Motors 6 x 7.5 KW Feed Continuously variable from 6 to 36 rpm with 4 KW Feed roller before and after position 2 Vertical Right with axis control ( on / off ) Planer heads 5 pieces on position 1-2-3-4-5 type. TERSA

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 130 mm : 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mm dimensions: 350 x 690 x 520 m band speed: 30 - 80 m/min total power requirement: 1,2 kW weight of the machine ca.: 19 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 510 mm capacity 90 degrees: square: 450 mm : 650x450 band speed: 15 - 100 m/min table height: 844 mm dimensions of saw-band: 5320 x 34 x 1,1 mm total power requirement: 3,0 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,9 x 2,87 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 2600 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-104-30CE Truss length: 2700 mm Load capacity: 2600 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...

: 0 bore depth: 10000 mm number of spindles: 0 Control: Siemens Simatic Touch SPS swing over bed: 1050 mm swing diameter over bed slide: 1600 mm boring diameter: 50 - 310 mm centre height: 800 mm speeds:: 2,5 - 400 total power requirement: 74 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 1500 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-084-30CE Truss length: 2700 mm Load capacity: 1500 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...

4 pcs. rope pulleys for counter weight of a FB 225 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used grinding spindle with wear marks. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.