127,137 used machines on RESALE, but how to find them? Machine Search
Weighing range 1x 10kg, 1x 5kg, including 1 \"Olland\" 4 kg scale, on 1 pallet Auction-ID: A1-43894-46
Technical data Battery drive type Internal charger Traction Drive Electric Working width brushes (mm) 850 Extraction working width (mm) 1180 - 1180 Fresh/waste water tank (l) 150 / 150 Theoretical area performance (m²/h) 6800 Practical area performance (m²/h) 4760 Battery type Low maintenance Battery (V/Ah) 36 / 240 Battery charging time (h) approx. 7 power supply for battery charger (V/Hz) 100 - 240 / 50 - 60 Travel speed (km/h) 8 Slope (%) 10 Brush speed (rpm) 180 - 1300 Brush contact pressure (kg) 94 aisle turning width (cm) 181 Water consumption (l/min) max. 7 noise level (dB(A)) 67 Power (W) up to 2600 Gross vehicle weight (kg) 957 Weight without accessories (kg) 218 Dimensions (L × W × H) (mm) 1790 x 1070 x 1420 Auction-ID: A1-43891-21
10 rolls each 35 meters in PP and 1.1 mm thickness in anthracite. Auction-ID: A1-47094-18
Power: 22 kW (30 hp) Operating parameters: Working pressure 10 bar; FAD 3.21 m³/min (113 CFM); noise ~71 dB(A); operating hours 15,000 h; dim. 787 x 698 x 1,202 mm; wt. 367 kg Workpiece capacity: Industrial compressed air supply; continuous operation Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; air-cooled system; control panel; compact enclosure Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2006; Manufacturer N/C Remarks: Used condition; moderate operating hours; suitable for workshop and industrial applications 22 kW rotary screw compressor delivering 3.21 m³/min at 10 bar with compact footprint. Auction-ID: A7-47066-7
Theoretical capacity ± 2,475 m²/hour Dimensions (L × W × H) 142 × 58 × 117 cm Working width (brushes) 55 cm Suction width (clean/dirty water intake) 80 cm Brush setup 2 brushes of 28 cm Tank capacity (clean water) 60 L Tank capacity (waste water) 60 L Weight of the machine 260 kg Maximum working speed 4.5 km/h Nominal consumption Approx. 1,000 W Voltage / Battery 24 V system (battery-powered) Noise level < 70 dB(A) Auction-ID: A1-43891-76
Viewing day by appointment Battery 2023 Auction-ID: A1-43891-12
Lehnhoff screw adapter VL80 suitable for a Kinshofer gripper with rotary motor; Condition: used; Auction-ID: A7-47086-118
Type: Screw compressor Model: Kaeser SX 8 YOM: 03/2021 Rated power: 5.5 kW Air flow: 800 l/min Max. pressure: 15 bar Working hours: 173 h (41 h under load) Time left to maintenance: 500 h Control system: SIGMA CONTROL 2 with RFID reader Rotor: SIGMA PROFILE, low-speed, energy-saving Motor class: IE3 premium efficiency Dimensions (D x W x H): 590 x 632 x 970 mm Weight: 155 kg Features: RFID access card, SD card slot, quiet and compact, high efficiency via KAESER cooling system Auction-ID: A7-47066-16
Technical data Battery drive type Internal charger Traction Drive Electric Working width brushes (mm) 850 Extraction working width (mm) 1180 - 1180 Fresh/waste water tank Batteries 2024 (l) 150 / 150 Theoretical area performance (m²/h) 6800 Practical area performance (m²/h) 4760 Battery type Low maintenance Battery (V/Ah) 36 / 240 Battery charging time (h) approx. 7 power supply for battery charger (V/Hz) 100 - 240 / 50 - 60 Travel speed (km/h) 8 Slope (%) 10 Brush speed (rpm) 180 - 1300 Brush contact pressure (kg) 94 aisle turning width (cm) 181 Water consumption (l/min) max. 7 noise level (dB(A)) 67 Power (W) up to 2600 Gross vehicle weight (kg) 957 Weight without accessories (kg) 218 Dimensions (L × W × H) (mm) 1790 x 1070 x 1420 Auction-ID: A1-43891-1
Mounting frame for a fully hydraulic quick coupler Lehnhoff VL 80 incl. a swivel drive Auction-ID: A7-47086-123
Power: 75 + 2.2 kW Operating parameters: Working pressure 10 bar; FAD 10 m³/min; noise ~75 dB(A); operating hours 51,000 h; dim. 1,995 x 1,065 x 1,450 mm; wt. 1,320 kg Workpiece capacity: Industrial compressed air supply; high-capacity continuous operation Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2011; Manufacturer N/C Remarks: Used condition; high operating hours; suitable for large-scale industrial air demand applications High-capacity 75 kW rotary screw compressor delivering 10 m³/min at 10 bar. Auction-ID: A7-47066-5
Lehnhoff screw adapter VL80 suitable for a Kinshofer gripper with rotary motor; Condition: used; Auction-ID: A7-47086-119
Type: Screw compressor Model: Kaeser SX 8 YOM: 2018 Rated power: 5.5 kW Air flow: 800 l/min Max. pressure: 11 bar Working hours: 19,742 h (17,808 h under load) Time left to maintenance: 3000 h Control system: SIGMA CONTROL 2 with RFID reader Rotor: SIGMA PROFILE, energy-saving, low-speed Motor class: IE3 premium efficiency Dimensions (D x W x H): 590 x 632 x 970 mm Weight: 155 kg Features: RFID card, SD slot, KAESER cooling system, quiet & compact, high efficiency Auction-ID: A7-47066-19
On 3 pallets, in various sizes including thickness 50/75/100 mm Auction-ID: A1-43894-41
Mounting frame for a fully hydraulic quick coupler Lehnhoff VL 80 Auction-ID: A7-47086-130
Lehnhoff screw adapter VL80 suitable for an Optimas paving pliers; Condition: used; Auction-ID: A7-47086-115
Equipped stop with digital readout and various saw blades Auction-ID: A1-43894-3
Lehnhoff screw adapter HS/MS08; used; Auction-ID: A7-47086-120
Power: 15 kW (20 hp) Operating parameters: Working pressure 11 bar; FAD: 2.20 m³/min @8 bar; 1.86 m³/min @11 bar; 1.40 m³/min @15 bar; noise ~65 dB(A); operating hours 39,454 h Workpiece capacity: Industrial compressed air supply; continuous operation Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2007; Manufacturer N/C Remarks: Used condition; high operating hours; D service applied; suitable for workshop and industrial air systems 15 kW rotary screw compressor with variable FAD depending on pressure and low noise level. Auction-ID: A7-47066-3
ATLAS COPCO GA 5 FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 5 FF Machine type: Screw compressor with integrated air dryer and air receiver Year of manufacture: 2003 Operating hours: approx. 38000 h Condition: Serviced by Atlas Copco Service history: Available Technical details: Rated power: 5.5 kW Working pressure: 8.5 bar Dimensions: Approx. 1200 x 800 x 2100 mm (including packaging) Description: Industrial screw compressor Atlas Copco GA 5 FF equipped with integrated air dryer and air receiver. Designed for reliable compressed air supply in workshop and industrial environments, offering efficient operation and compact design. Auction-ID: A7-47066-9
Type: Screw air compressor Manufacturer: Grassair Model: RLR50V Year: 2014 Serial number: AP1123117 CE Marked: Yes Pressure: max. 10 bar (145 psi / 1 MPa) Capacity: approx. 6.83 m³/min (113.9 l/s / 241.2 cfm) Power: 37 kW (50 hp) Voltage: 400 V Frequency: 50 Hz Phase: 3 Ph Motor speed: 3570 rpm Dimensions (L x W x H): 1750 x 1100 x 1650 mm Own mass: approx. 920 kg Condition: Fully functional Working hours: Unknown Remarks: Industrial screw compressor; complete unit with integrated control (Airlogic); well-maintained; suitable for continuous operation; see photos for details and configuration Auction-ID: A7-47063-17
Rated power: 15 kW Air flow: 2500 l/min Max. pressure: 11 bar Time left to maintenance: 3000 h Working hours: 8076 h Dim. (LxWxH): 780 x 1480 x 1255 mm Weight: 487 kg Auction-ID: A7-47066-15
Power: 22 kW (30 hp); VSD (variable speed drive) Operating parameters: Working pressure 4–13 bar (adjustable); FAD 0.72–4.00 m³/min (25–141 CFM); noise ~67–70 dB(A); operating hours 64,000 h; dim. 1,330 x 870 x 1,725 mm; wt. 516 kg Workpiece capacity: Industrial compressed air supply; variable demand applications Supported edges: N/A Edge types: Compressed air generation; drying (integrated dryer) Included equipment: Rotary screw compressor; VSD inverter control; integrated air dryer (full feature); air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2007; Manufacturer N/C Remarks: Used condition; high operating hours; energy-efficient VSD system for variable load operation 22 kW variable-speed rotary screw compressor with integrated dryer and adjustable pressure ran ...
Power: 22 kW Operating parameters: Working pressure 13 bar; FAD 3.45 m³/min; noise ~70 dB(A); operating hours 25,816 h Workpiece capacity: Industrial compressed air supply; continuous operation Supported edges: N/A Edge types: Compressed air generation; drying (integrated air dryer) Included equipment: Rotary screw compressor; integrated air dryer; air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2006; Manufacturer N/C Remarks: Used condition; high operating hours; suitable for workshop and industrial air systems 22 kW rotary screw compressor with integrated dryer, 13 bar pressure and 3.45 m³/min capacity. Auction-ID: A7-47066-2
Lehnhoff screw adapter VL80 suitable for a Cangini Bene hedge trimmer; Condition: used; Auction-ID: A7-47086-109
The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-47023-152
Motor power: 4 kW YOM: 1997 Operating hours: 0 (fully refurbished) Flow rate: ~0.55 m³/min at 8 bar Max. pressure: 10 bar Air tank volume: 90 l (integrated) Noise level: ~64 dB(A) Cooling: Air-cooled Electrical supply: 400 V / 3 Ph / 50 Hz Control system: Basic Connections: Air outlet: 3/4\" BSP | Condensate: 1/2\" BSP Dimensions (L x W x H): 600 x 630 x 850 mm Weight: ~150 kg Condition: Refurbished to \"as new\" with zero hours Features: Energy-efficient, robust design, regular maintenance required Replaced parts: New air & oil filters, separator, bearings, gaskets, belts, electrical components, intake & MPV valves Auction-ID: A7-47066-12
2 refrigeration dryers (Boge, D167 + DS 311) 1 storage container (CSC Terruggia, PC500-16) 1 filter (bow) not tested for functionality
Type: Flexible auger Length: 5 m Engine: Electric motor Equipment: Flexible hose with suction probe Use: Transfer of materials (pellets, chips, etc.) Status: Good overall condition Auction-ID: A1-47128-16
General information Brand: Genie Model: GS-2646 Type: Scissor lift (scissor lift) Manufacturer: Terex / Genie Year of construction: 2009 Identification Model code: GS 2646 Serial number: GS4603-50370 (as shown in the plate) Chemical unit number: ES00142 Capacity & use Maximum working load: 454 kg Number of people (inside): 2 Number of people (outside): 2 Machine intended for use: indoor and outdoor Wind & load Max. wind speed (outside): 12.5 m/s Max. wind speed (indoor): 0 m/s Max platform force: 400 N Dimensions (platform) Max. platform height: ± 7.8 m Platform extendable: Yes (extension available) Safety information Multiple warning stickers present (DANGER / IMPORTANT) Use according to instructions required Only trained personnel are allowed to operate Machine complies with EU directive EN 280 Other info Manufacturer location: USA (Genie / Terex) ...
floor scrubber Brand: Kremer Type: KRFL50-A Function: Scrubbing and drying in 1 cycle Capacity: 2000 m² per hour Equipped with: adjustable brush pressure Brush diameter: 510 mm Brush speed: 175 revolutions per minute Holding tank: 50 litre holding tank Clean water tank: 50 liter clean water tank Number of motors: 2 motors Power: 2 x 500 watts Battery: 24 V / 100 Ah battery Including: battery charger available Manual: manual available Weight: 160 kg Condition: Unused in the original packaging Auction-ID: A3-43538-615
1 BOGE C20F screw compressor - year 2018 15 kW 1 ALMIG ALM-150D dryer - year 2015 1 tank of 500 lt - year 2022 Auction-ID: A7-47148-9
Equipped with foot control. Auction-ID: A1-41277-229
SCM Cella Accord CNC machining centre – year of construction 2009. Machine was operational until the control system failed. Suspected defect in SCM PLC/CNC control. Spindle drive is working. Machine is complete including vacuum pumps, suction and some accessories (see photos). Sold in current condition, without warranty. Dismantling, loading and transport are entirely at the expense of the buyer. Auction-ID: A3-43538-21457
Type: Flexible auger Length: 5 m Engine: Electric motor Equipment: Flexible hose with suction probe Use: Transfer of materials (pellets, chips, etc.) Status: Good overall condition Auction-ID: A1-47128-17
This concerns an unused product, consisting of article number: 1622121006, Feed scoop stainless steel, Auction-ID: A1-45624-248
This concerns an unused product, consisting of, article number: 36151703, Top chain for Mullerup dung-channel cleaner 19.55 M, quantity: 2, article number: 36151728, Pull chains for Mullerup 135 led, quantity: 5 Auction-ID: A1-45624-137
Digital, with counter, analogue, by Mitutoyo and Garant Auction-ID: A7-47109-26
Maximum height 1000 mm, load capacity 500 kg Auction-ID: A7-47149-3
This is a compact, safe and extremely reliable aerial platform for indoor work - This Pop-Up PUSH8 scissor lift is the perfect replacement for unsafe ladders and scaffolding. Thanks to its compact size, it fits effortlessly through standard doorways and in elevators. Ideal for installers, painters, electricians and facility managers! - Main specifications: Maximum working height: 4.50 meters (platform height: 2.44 m), Lifting capacity: 240 kg (more than enough for 1 person + 160 kg tools and materials), Own weight: Only 370 kg (very low floor load, can stand on almost any floor) - Dimensions (LxWxH): 1.20 m × 0.70 m × 1.80 m (extremely compact and manoeuvrable) - Drive: 12V battery (low maintenance) with built-in charger (110V / 240V) - Pros of this machine: Safe & Stable: Automatic braking system on the wheels as soon as the platform rises, User-friendly: Simple operation and equipped ...
Large batch WSP cutter carriers for spindle heads / clamping screws / spare parts for WSP carrier tools / solid carbide backing plates etc. mainly Sandvik Auction-ID: A7-47109-73
Schaffer Equipped with double working hydraulic circuit Hydraulic quick coupler Battery key Front / rear / arm - led work lamps Rear plug for trailer Rear tyres filled with glycol Well maintained ! Auction-ID: A3-43539-19216
Transformer dimensions approximately 950x1000x1100mm, unused, on and including wooden transport frame Auction-ID: A1-41277-283
Including WSP screw-in milling cutter with matching holders, unused inserts, inserts unused. Auction-ID: A7-47109-1
nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m
pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m
Double mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable - Quick-release vise - Massive, large material support - Automatic cooling Cutting range at 90 degrees: around 255 mm Cutting range at 90 degrees: square 240 mm Cutting area at 90 degrees: rectangle 300 x 180 Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Belt speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Dimensions approx. 1.23 x 1.7 x 1.75 m Condition: New
maximum number of results exceeded
please refine your search
10 € 
