sc 17 used for sale

Offered is a business card cutter of the brand Duplo Ultra Cut 130 Estimated value of goods: 4000 € Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-247

With content; Maximum floor load 400kg With various electrical components consisting of industrial routers from different manufacturers and a graphics card Auction-ID: A1-46981-210

Equipped with: complete set for installation of a remote control on a loading crane for example HIAB, HIAB Plugs available Auction-ID: A1-42018-150

Equipped with 2023 SEA buffer tank size approximately 155xø45cm and NVKL Compressed Air Dryer size approximately 47x37x50cm soaking condition Auction-ID: A1-40113-135

serial number IT12/10389 Electric platform Iteco IT12122 (2008) Professional electric scissor lift, ideal for indoor and outdoor work on flat surfaces. Technical data: • Type: electric scissor lift • battery 24/300 V/Ah • Working height: 13.9 m • Lifting capacity: 350 kg • Machine weight: 3,315 kg • Extendable platform (1.20 x 2.26 m) • Battery powered – no emissions • Travel speed: up to 4 km/h Widely used in halls, warehouses and industrial maintenance Auction-ID: A7-46982-4

Demonstration model Features: Extendable platform Solid tires Documentation Transport height with railing folded: 194 cm Auction-ID: A1-40139-82

Features: 0.90m extendable platform, fold-down handrails, semi-swing gate, removable platform console box, lanyard attachment points, fully proportional joystick steering With integrated thumb switch, proportional lift/lower speed control, joystick for lift and drive, load detection system, swinging doors for battery/electric compartments, automatic 20-amp battery charger, dual motor front-wheel drive and steering, automatic brakes on both wheels, emergency brake release, battery status indicator, hour meter, lubrication-free bushings for the scissor arms, maintenance support for the scissor arms, manual lowering function, horn, lashing eyes, forklift openings, Non-Marking full rubber 323 x 100 tires, working height 7.72 m, platform height – in raised position 5.72 m, folded height 2.02 m, platform handrail height 1.10 m, folded height (handrails folded) 1.59 m, platform dimensions (W  ...

Composite wire screens 60 x 180 cm Unused Risk of minor damage present Auction-ID: A1-40113-149

Features: 0.91m extendable platform, fold-down handrails, self-closing gate, removable platform console box, lanyard attachment points, fully proportional joystick control with integrated thumb switch, proportional lift/lower speed control, joystick for lifting and traveling, load detection system, two speed settings, direct electric drive on two wheels, 8 x 6V 370 A/hr deep cycle batteries, automatic traction control, automatic 20 amp battery charger, automatic rear wheel brakes, alarm and indicator light in case of tip-over, steel scissor guards, oscillating rear axle, lift/lashing eyes, lubrication-free scissor arm bushings, scissor maintenance support, Ground control selector, key lock, battery status indicator, hour meter, horn, manual lowering cable, Non-Marking tires, working height 14.19 m, platform height – raised 12.19 m, folded height 2.80 m, platform handrail height 1.10 m, ...

Clextral extruder, Type: Evolum EV032 M, Extruder: 40D, Barrel length: 10 x 128 mm, Stroke length: 1420 mm, Water: 4.5 - 5.5 Bar, Compressed air: 6 Bar, Steam injection: 2 - 6 Bar, Power: 3 x 400V, 50Hz, 83kW, Dimensions: 4475 x 1200 x 2100 mm, Weight: 1905 kg, Only 80 working hours!, Clextral water pump, Type: CLX DKM, Flow: 6 - 42 l/h, Pressure: max 10 Bar, Reservoir: 7.5 litre, Power: 0.55 kW, Dimensions: 1265 x 350 x 700 mm, Cextral / Prominent oil pump, Type: GMXA1604, Flow: 0.3 - 2.5 l/h, Pressure: max 10 Bar, Reservoir: 10 litre, Dimensions: 900 x 700 x 1150 mm, Clextral High Moisture Extrusion Cooking die, HMEC type: 2 x 800 mm length, Material: CLX202, Internal section: 60 x 8 mm, Dimensions: 1900 x 700 x 1200 mm, TLV steam kit, Type: 2/10 TLV, Serial number: SV148, Steam flow: 2 - 10 kg/h, Steam pressure: 6 - 10 Bar, Maximum pressure: 10 Bar, Steam inlet: DN15, PN16, Steam outl ...

Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, Digital scale -Type: LS 703 ML 1140 mm -Id.No.: 216 750 15 -Quantity: 1x length measuring device available -Dimensions: 1305/80/H45 mm -Weight: 2.5 kg

Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, Digital scale -Type: LS 703 ML 520 mm -Id.No.: 216 750 08 -Quantity: 1x length measuring device available -Dimensions: 680/80/H45 mm -Weight: 1.7 kg

Ringer Master (compatible with Doka Framax) accessories, consisting of: 21 pieces Ringer Master Scaffolding Bracket 120, without posts, galvanized Factory number: 708V11 SO000583 Auction-ID: A1-46973-414

Rux Super65 Scaffolding floors, used, consisting of: 1 piece of aluminium pavement plank 1.5m x 0.29m 1 piece steel floor 1.5m x 0.29m (Article number 04547) 1piece steel floor 2.0m x 0.29m (article number 04549) SO001383 Auction-ID: A1-46973-327

Ringer Master (compatible with Doka Framax) accessories, consisting of: 25 pieces Ringer Master Scaffolding Bracket 120, without posts, raw, ungalvanized Factory number: 708V11 SO000582 Auction-ID: A1-46973-413

approx. 250 pieces of scaffolding normal couplings (fixed couplings) SO000146 Auction-ID: A1-46973-307

Swivel Mandrel + Holder OD 105 Application For quick comparison measurement of bores during series inspection. Due to the looped sleeve with a small undersize, the mandrel is drilled into the hole. guided and centered. Execution - Measuring contacts and measuring needle made of carbide (wear-resistant) - Measuring mandrel from Ø 130 mm can be supplied as a cross sleeve or skid-cross sleeve - Standard version Advantage - Easy to use - Minimal measurement time - Maximum measurement reliability - Robust and reliable - Matched to the desired bore diameter + tolerance Auction-ID: A1-47017-72

incl. charger and transport case Auction-ID: A1-47009-75

Product Description - Mobile measuring arm with integrated laser scanner (3D coordinate measuring machine) - Manufacturer: FARO - Model: FARO Edge / Model 14000 - Serial number measuring arm: E06051429518 - Year of construction: 2014 Application: - 3D digitization and 3D modeling - Industrial metrology / quality assurance - Reverse engineering & CAD comparison Technical data: - Measuring range: approx. 1.8 – 2.0 m - Single-point accuracy: ± 0.05 mm - Volumetric accuracy: ± 0.065 mm - Scanning accuracy: approx. 0.08 mm - Combination of tactile measurement and laser scanning - Automatic stylus recognition - One-handed operation Scope of delivery (complete): - FARO measuring arm - FARO handheld laser scanner unit (removable) - Transport case with foam insert - Accessories in the case (as shown) - Additional feet / support elements (as shown) - Handheld scanner (integrated laser s ...

incl. charger and transport case Auction-ID: A1-47009-76

ETICS scaffolding anchor system from Layher, consisting of: 7 pcs ETICS anchor traverse 1000 8 ETICS anchor beams 800 53 ETICS anchor rod 480 (up to approx. 300mm insulation) 17 ETICS anchor rods 380 (up to approx. 200mm insulation) 60 pcs lock nut SW 36x30 for ETICS anchors SO001377 Auction-ID: A1-46973-324

Lot of 158 screws M30x100 each with 1 washer with chamfer and 1 nut, blank, used Strength class 10.9 (HV) Pitch 3.5mm Male Thread Screw 25.71mm Female Thread Nut 26.21mm Cross-sectional stress area 561mm² Wrench width 46mm Weight per unit 1.00kg Item price SO001301 Auction-ID: A1-46973-120

incl. charger and transport case Auction-ID: A1-47009-88

Consisting of: a.o. Approx. 6 mounting frames Protect 120/ 7 rungs Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 2 horizontal struts 180 Approx. 4 diagonal struts 180 Approx. 4 rolls Approx. 4 Tower Protect 180 platforms, 3 of which with hatch incl. pallet, pack size approx. 3000x1400x800 mm Auction-ID: A1-47009-45

32 pieces of railing posts for the Ringer Master scaffolding bracket 120, galvanized, Factory number 408V12 Ringer Master formwork is compatible with Doka Framax SO000587 Auction-ID: A1-46973-418

Consisting of: a.o. Approx. 4 mounting frames Protect 120/ 7 rungs Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 1 solar frame Approx. 4 horizontal struts 180 Approx. 6 diagonal struts 180 Approx. 4 triangular booms type B Approx. 2 Tower Protect 180 platforms, 2 of them with hatch Pack size approx. 2900x2200x700 mm Auction-ID: A1-47009-44

21 pieces Ringer Master scaffolding brackets 120, galvanized, without railing posts Factory number 704V11 Compatible with Doka Framax Item price SO000584 The offer is WITHOUT any depicted transport or storage containers, barels, lattice boxes, etc. Auction-ID: A1-46973-415

Ringer Master (compatible with Doka Framax) accessories, consisting of: 9 pieces Ringer Master Scaffolding Bracket 120, without posts, galvanized Factory number: 708V11 SO000585 Auction-ID: A1-46973-416

Consisting of: a.o. Approx. 3 mounting frames/ 7 rungs Approx. 1 solar frame Approx. 9 railing frames Protect 180 Approx. 4 diagonal struts 180 Approx. 4 triangular booms type B Approx. 2 platforms platforms, 2 of them with hatch Approx. 4 rolls Approx. 1 basic profile for material lift Approx. 2 profiles long Approx. 1 profile short Approx. 1 material lift box Approx. 1 bracket for material lift incl. SELF-MADE pallet rack, pack size approx. 3000x1620x1500 mm Auction-ID: A1-47009-30

ca 1100 Case Plug Ø 9mm, NEW PRODUCT For staking out vertical frames suitable for Plettac, Rux, Layher,... List number by manufacturer: BIE00805 SO001382 Auction-ID: A1-46973-326

Consisting of: a.o. Approx. 6 mounting frames Protect 120/ 7 rungs Approximately 5 Railing Frames Protect 180 Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 4 Tower Protect 180 platforms, 3 of which with hatch incl. pallet, pack size approx. 2300x1400x1200 mm Auction-ID: A1-47009-51

incl. charger and transport case Auction-ID: A1-47009-103

approx. 200 pieces of scaffolding normal couplings (fixed couplings) SO000141 Auction-ID: A1-46973-306

Consisting of: a.o. Approx. 4 triangular booms type B Approx. 2 horizontal struts 180 Circa 4 Diagonal brace 180 Approx. 1 solar frame Approx. 1 beam for material lift solar incl. pallet, pack size approx. 3000x1300x1200 mm Auction-ID: A1-47009-52

Lot consisting of 104 pieces of steel scaffolding tubes Ø48.3mm Nominal length 150 (between 1.5 and 1.99m long) SO000105 The offer is WITHOUT any depicted transport or storage containers, barels, lattice boxes, etc. Auction-ID: A1-46973-301

Consisting of: a.o. Approx. 6 mounting frames Protect 120/ 7 rungs Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 4 Tower Protect 180 platforms, 3 of which with hatch Approx. 1 material lift box incl. pallet, pack size approx. 3000x1400x800 mm Auction-ID: A1-47009-46

Lot consisting of 156 pieces of steel scaffolding tubes Ø48.3mm Nominal length 100 (between 1.0 and 1.49m long) SO000111 Auction-ID: A1-46973-302

incl. charger and transport case Auction-ID: A1-47009-86

incl. quiet speed colposcope Auction-ID: A7-47030-161

25 pieces of railing posts for the Ringer Master scaffolding bracket 120, ungalvanized, raw, Factory number 408V12 Ringer Master formwork is compatible with Doka Framax SO000586 Auction-ID: A1-46973-417

approx. 130 pieces of scaffolding normal couplings (fixed couplings) Item price so000140 Auction-ID: A1-46973-305

approx. 30 pieces Müba Bracket Scaffold Hook-in Shoes, Hook-in Pockets, galvanised SO001039 Auction-ID: A1-46973-318

Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps  

Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation

Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Technical Specifications: Number of closing elements: 8 Capacity: up to 20.000 bph Cap type: 28mm aluminum screw cap Working direction from left to right Format: 0,7l GDB bottle

ROHDE & SCHWARZ - CMS 54 RADIOCOMMUNICATION SERVICE MONITOR 0.4...1000MHz Base station simulation for cellular mobile phone testing, e.g. call establishment, call termination, channel and power change Auction-ID: A1-47049-88

ROHDE & SCHWARZ - FSEM SPECTRUM ANALYZER 20Hz... 26.5GHz Spectrum Analyzer Auction-ID: A1-47049-91

EXTRACTION HOOD - Ref 1480 Manufacturer: Anachem / Flow Sciences Model: EUFS2350 Serial Number: FS58 Filter reference: FS 4251 Air Motion Detector: FS 1600 Overall dimensions (W x D x H): 1300 x 1000 x 1300 mm Usable dimensions (W x D x H): 900 x 850 x 1300 mm Extraction section: 150 mm External connection section: 100 mm Documentation: available (instruction manual) Auction-ID: A1-47051-31

SCHLODER - ESD Generator SESD 216 The SESD 216 electrostatic discharge simulator is suitable for performing electromagnetic compatibility (EMC) tests on systems and equipment Auction-ID: A1-47049-206

Technical details Manufacturer: MAJA-Maschinenfabrik Hermann Schill GmbH & Co. KG Model: SX UNY Type: Industrial skin peeling machine Year: 2002 Machine number: 43676 Voltage: 400 V Frequency: 50 Hz Power: 0.75 kW Current: 2.2 A Configuration: - Conveyor-fed product system - Rotary peeling assembly - Product guiding system - Adjustable mechanical feed lever - Safety cover installed Construction: Stainless steel Application: - Meat skin removal - Fish skin peeling - Food processing operations - Industrial meat and seafood preparation Dimensions: - Length: Approx. 1200 mm - Width: Approx. 800 mm - Height: Approx. 1400 mm Weight: Approx. 180 kg Condition: Used Auction-ID: A7-47053-37