sbo 8 used for sale

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

turning diameter:336 mm turning length:216 mm weight of the machine ca.:8,3 t Article: CNC multi-axis lathe Manufacturer: Hurco Model: TMX 8MYSi Year of manufacture: 2022 CNC multi-axis lathe Excerpt from manufacturer?s specifications: Working area: Max. turning diameter: 336 mm Max. swing diameter: 560 mm Main spindle specifications: Max. speed: 4,500 rpm Chuck diameter: 210 mm Tie-bar diameter: 64.5 mm Counter-spindle specifications: Max. speed: 6,000 rpm Tool turret with driven tools Bar-Loading Magazine: SAMSYS M3000 (2022 model) HYDAC Cooler The machine can be visited under power. The tool configuration included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:2,8 t Dimensions (WxDxH):1,6 x 2,2 x 2,3 m

material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:3,1 t Dimensions (WxDxH):2,2 x 1,5 x 2,8 m

pressure:800 t distance between columns:3010 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:1350 mm table surface area:3000 x 1800 mm table height over floor:500 mm side window:1500 x 1400 mm ram surface:3000 x 1800 mm speed down:300 mm/s oil volume:900 l height over floor:5,4 m height beneath floor:2,1 m power requirement:200,0 kW weight:80,0 t Dimensions (WxDxH):5,2 x 2,6 x 7,5 m ram interlocking:in TDC depth stop:mechanical

material width:800 mm coil weight:12,0 t coil internal diameter:470 - 520 mm coil external diameter:1500 mm material thickness:0,4 - 2,5 mm no. of straightening rolls:8 straightening roll diameter:53 mm number of draw-in rolls:2 inlet roll diameter:160 mm speed:35 m/min material thickness at 150 mm material width:2,5 mm material thickness at 650 mm material width:1,5 mm material thickness at 800 mm material width:1,0 mm straightening machine:RM 8-53/160-800 decoiler:HE 200-1000

Pressure:800 t distance between columns:3250 mm stroke:1100 mm Distance table/ram, stroke up:1900 mm Table surface area:3100 x 1900 mm pressure of drawing cushion in table:300 t Die cushion stroke in table:300 mm Die cushion area in table:2500 x 1800 mm Die cushion pressure in ram:80 t Die cushion stroke in ram:200 mm Die cushion area in ram:2200 x 1000 mm Ram surface:3100 x 1900 mm Side window:900 mm Oil volume:4700 l Power capacity:200,0 kW Dimensions (WxDxH):4,95 x 3,3 x 10,2 m Height above floor:7,05 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic

Pressure:800 t distance between columns:2560 mm stroke:1050 mm Distance table/ram, stroke up:1870 mm Table surface area:2500 x 1730 mm pressure of drawing cushion in table:300 t Die cushion stroke in table:395 mm Die cushion area in table:2300 x 1300 mm Ram surface:2500 x 1730 mm Die cushion pressure in ram:63 t Die cushion stroke in ram:150 mm Side window:1000 mm Oil volume:4300 l Power capacity:200,0 kW Dimensions (WxDxH):4,1 x 2,8 x 10,0 m Height above floor:7,0 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable

Pressure:800 t distance between columns:3550 mm stroke:1100 mm Distance table/ram, max. stroke up, adjustment up:1900 mm Table surface area:3500 x 1800 mm pressure of drawing cushion in table:350 t Die cushion stroke in table:280 mm Die cushion pressure in ram:80 t Die cushion stroke in ram:160 mm Ram surface:3500 x 1800 mm Side window:1900 mm Weight:100,0 t Floor Space (WxD):5,3 x 4,3 m Height above floor:7,3 m Height below floor:5,0 - 6,0 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact cushioning:hydraulic sliding table:without rails for moving table

pressure:800 t distance between columns:1050 mm stroke:200 mm no. of strokes:8 - 25 /min distance table/ram, max. stroke up, adjustment up:1300 mm Side window:550 mm table surface area:1030 x 900 mm Capacity of ejector in table:15 t Stroke of ejector in table:85 mm ram surface:1040 x 800 mm ram adjustment:120 mm Capacity of ejector in ram:12 t ejector stroke in ram :80 mm power requirement:36,0 - 112,6 kW weight:65,0 t Dimensions (WxDxH):3,0 x 3,1 x 6,07 m ejector in table:hydraulic ejector in ram:hydraulic

Used HRS tubular skid-mounted pasteurizer cold-fill 3000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems pasteurizer is a stainless-steel packaged process skid designed for controlled thermal treatment within beverage production and industrial packaging operations. Pasteurizers are used to apply a defined heating and cooling process that supports product stability and consistent processing before downstream filling, labeling, capping, or secondary packaging.Manufacturer: HRS Process SystemsModel: 1 x 20 M170 - 63/100 8000Configuration: SKID - 1Year: 2018Operating hours: 18,939Construction: Stainless-steel process skid assemblyAdvanced Automation & Control SystemsThe machine is supplied as a process skid, providing a compact arrangement for thermal processing equipment and associated process connections. A pasteurizer installation is typically integrated ...

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Measuring Plate, Lapping and Control Plate PAGUS Working Surface: 800 x 800 mm Working Height: 100 mm Dimensions: 800 x 800 x 100 mm

Clamping table PAGUS Clamping surface: 800 x 800 mm 8 grooves Groove width: 18 x 31 mm Center groove: 28 x 9 mm Bore: 32 mm 32 mm deep (not rotatable, counterpart missing) used, tested ! Dimensions: 800 x 800 x 220 mm

Pneumatic cylinder NORGREN SPC/980162B/32/850 stroke: 850 mm Rod diameter: Ø 32 mm pmax: 10 bar New ! Dimensions: 720 x 160 x 60 mm

Lenze stateline c 8400 4kw frequency regulator Auction-ID: A1-50076-202

approximately 8000 Allen bolts and 8000 stainless steel body rings Auction-ID: A1-46379-456

approximately 8000 Allen bolts and 8000 stainless steel body rings Auction-ID: A1-46380-84

max height 420mm; min height 195mm; 5636 Auction-ID: A1-50866-325

max height 420mm; min height 195mm; 5636 Auction-ID: A1-50866-324

approximately 8000 Allen bolts and 8000 stainless steel body rings Auction-ID: A1-46381-456

Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Kat-No 10-1845 in very good condition! With friction gear motor for infinitely variable speed adjustment Stable and mobile application On frame with steering wheels with stopper, foot-adjustable With guide stripfor bottles and cartons transport Dimensions and weight: Bandwidth:8 cm Total width:38 cm Total length: 830 cm Height:100 cm Weight:200 kg Supplement: 895€ for frequency inverters For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

technical data: Make: Loher Type: LA 80b-4 Types No:: 8235539 Connection: Star 220/380 / 3.4/1.95 A kW: 0.75 kW Rpm: 1410 rpm

Kat. No. 09-1049-2 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,050 mms of weight: 106 kg surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1590-2 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws, Ueberdruckventil thread connection carbines DN 25 and with sloping seat discs valve DN 25 Kat. No. contents: Diameter: G flat height: Weight: 09-1590-2 800 litres 1,000 mms 1,550 mms 89 kg upon request: CIP Cleaning Connector fermentation fittings Fermentation lock DN 50 Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Length: 4,700 mm Roll width: 800 mm Roll spacing: 650 mm Roll diameter: 168 mm Recesses: 4 Drive power: 2.2 kW 83 rpm. - mounted with ball bearing rollers on profilesteel frame - Drive by special gear motor - Praezisions roller chain - spring-loaded lashing compensation

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Cat. No. 12-2130 in a very good condition With Heating and Cooling Jacket with Paddel Agitator DxH: 2100 x 3900 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

BasysPrint UV Setter 850 2013 Manufactoring 3-Head UV laser diode 24 Plates/Houer SCL with 2 Carriges Max: Plate format 940 x 1150 mm Min: Plate Size 200 x 200 mm With Interplater 85 PlateProcessor Server PC, 20 TFT Monitor. Laser diodes in best condition.

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 80,000 litres Diameter: approx. 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

1,500 m² Nedcon mezzanine Column grid 800 cm x 600 cm! Used goods, top condition, as good as new, see pictures Height of the upper edge of the stage 370 cm Load 500 kg/m² Flooring different finishes available. Cargo lifts, stairs, railings and accessories sufficiently available CAD planning and assembly possible Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-c ...

Euro-Pool Grid Box 800 x 1200 mm New goods, see pictures. External dimensions 1,240 x 835 x 970 mm Internal dimensions 1,200 x 800 x 800 mm Capacity 1500 kg Weight 70 kg Weight 70 kg Load 6,000 kg Colour grey Stack height nested 20 Stack height unnested 5 according to UIC standard 435/3 The front side is foldable. One half is open from above the other half is open from below (see pictures). Price: € 109.00 net per piece from stock Larger quantities on request Goods are in stock. Transport possible on request. Visit possible at any time by appointment. More information on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure co ...

Rotary vane vacuum pump lubricated Performance: 12 months Manufacturer: Leybold Type: Trivac D8 B and type BCS available Cat No.: 11296 Status: Generalueberholt and repainted Suction power: approx. 8 m3/h Endduck: approx. 5x10e Operating instructions Delivery time: from stock Please contact further details or technical advice via enquiry; ready for use

Nilfisk industrial vacuum cleaners a few hours of operation 400 V / 50 Hz / 3.0 KW

SIMOTICS S Synchronmotor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, new -40% Special price The current new price of a similar product is € 1.761 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - SIMOTICS S synchronous motor, 0.82KW, 1FK7042-2AF71-1CH1, Siemens - rpm 3000 - n max. 9000, - With encoder AM24DQI and brake 24VDC - Smooth shaft D19mm - Incl. connection cable and patch cable 16 or 12m - Connection dimensions: Centring D81mm, pitch circle D100mm x z4, Attention: We have the complete winding drive, rewind drive D75mm and D150mm ...

High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).

Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 870 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.495.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 870 kg capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 870 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

GP113 - used approx. 15.8 m³ / 15,800 litres PVC-GF tank, aboveground, vertical, flat bottom, in good condition. volume: approx. 15.8 m³ / 15,800 litres material: PVC-GF tank diameter: Ø approx. 2.30 m height: 4.30 m Vertically standing PVC-GF-tank, aboveground storage tank, round shape, flat bottom, access on the tank body, multiple in- and outlets on the rooftop. Tank as shown on the pictures. For media with a specific weight of up to 1.42 kg / L. The container can be used as a storage tank for water, feed, liquid feed, manure, seeping juice, rapeseed oil, or as a rain collection tank, water tank and more. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank  ...

P119 - used approx. 28.8 m³ / 28,800 litres GF-UP tank / plastic tank, double-walled, flat bottom tank, in good condition. technical details: capacity: approx. 28.8 m³ / 28,800 litres material: double-walled GF-UP tank manufacturer: Formoplast dimensions: Ø approx. 3.0 m x total height approx. 4.5 m certification mark: PA-VI 312.002 (DIBT examination report not available) specific weight: 1.4 kg / L Used storage tank in good condition. The hull will be newly painted in dark green. Double-walled flat bottom tank, aboveground storage tank with various connections such as ventilation, feed, etc., lid on the roof. According to the age, traces of use are present. For media with a specific weight of up to 1.4 kg/L, the tank formerly contained iron(II) chloride. This container can be used as a storage tank for liquid feed, water, whey and many different media. Pric ...

Machine is equipped wit h HEIDENHEIN DIGITALS 2 TURNING HEADS TURNING LENGHT 1800mm HOLE TROUGH SPINDLE 76mm WITH LINETS AND ACCESORRIESS, READY TO WORK. BEFORE LOADING MACHINE WILL BE CLEANED FOR THE CUSTOMER.

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

Technical data: Turning diameter over bed: 520 mm Turning diameter via support: 310 mm Turning length: 1000 mm Circulation diameter in recess: 580 mm Peak height: 250 mm Bed width: 410 mm Spindle bore: 62 mm Spindle flange: Camlock Gr. 8 Spindle speeds: 24: 9 - 1800 rpm Machine weight approx.: 2.75 t Space requirements approx.: 2.8 x 1.3 x 1.3 m Electrics 380 Volt: 32A Three-jaw lining: 315 mm Forkart Coolant device Measuring system: Glasstab 0.005mm resolution on all 3 axes Quick-release steel holder " Multifix ": C

Steel hall, steel construction, nacelle trapezoidal sheet clad used Manufacturer: unknown Trapezoidal sheet metal clad Dimensions approx. 5 x 5 x 8 m Weight approx. 4 t The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg

Three-phase motor, electric motor -Manufacturer: Volta, electric motor from guillotine shears Stankoimport 3218 -Type: AOC2-52-6 - C1 -Power: 9 kW -Speed: 890 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Dimensions: 570/370 / H315 mm -Weight: 112 kg

1 Reimelt Zeppelin aluminium outer silo 2 chambers Silo stands on frame Capacity 80m³ Ø 3,000 mm Height approx. 15,000 mm Bulk density 0.8 t/m³ Price on request Phone +49 172 8345457

PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...

Tecnodom Master 150 Gastro refrigerated counter Description Refrigerated counter in a modern design. Ventilated version, equipped with hypothermia, lighting in the cove and an uncooled glass intermediate floor. Analogue temperature display and night cover in the form of plexiglass sliding windows. Very suitable for your cafeteria, sandwich shop, supermarket and any catering business. Includes sliding windows made of plastic With curved tilting window Including intermediate level Specifications Dimensions WxDxH: 1500x898x1243 Inside dimensions: 138x56x70 cm Connection value: 0.65 kW Connection voltage: 230V Temperature range degrees: +2 to +6 degrees More items - new and used - can be found in our shop! International shipping costs on request!