126,721 used machines on RESALE, but how to find them? Machine Search
Danoflex Ø 800 mm cylindrical abrasive grinding
Danoflex Ø 800 mm cylindrical abrasive grinding Max sandingwidth: 800 mm Main motor(s) power : 4.5 kW
A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.
Lippert belt conveyor GF 8260-550-400 RA1621 Technical data: Conveying length (NL): 8260 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 8260 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...
A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.
Year of construction 1988, with Marrel Grue 1150 crane: Year of construction 1995, 2-fold hydraulic extension to max. 7 m, 3650 kg maximum lifting capacity,
B&A REF: 9222 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 2 MOTOR: 11 HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC
Vögele Super 800 asphalt paver, Technical specifications:, - Operating weight: 6100kg, - max. operating weight: 6300kg, - Operating hours: 3260h, - Year of construction: 2007, - bunker side wall hydraulically foldable, - ready for immediate use, Equipment:, - AB200TV Bohle, - 2x 35cm extensions
VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, control panel, good working conditions, Constructed in 11-2001, offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric
Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...
Soyer KTS 850 Working Area: X 800mm x Y 750mm Positioning accuracy according to the manufacturer: +/- 0.2 mm Welding range from M3-M10 to 40mm length 2 welding heads: Head 1 works perfectly, head 2 no longer welds reliably but works. Intuitive component programming via dxf data Machine completely enclosed with safety-monitored door Weight approx. 900kg 2x welding machines BMS-10N tip ignition according to DVS leaflet 0903 with gap and contact welding Weight approx. 20Kg 2x Universal vibrator UVR-300 Automatic bolt feeding from M3 to M8 and bushings up to M5 Weight approx. 48kg/vibrator plus accessories Other accessories: Various bolt holders for external threads from M3 to M8 Various push-in pistons with spacer rings for different bolt lengths Pneumatic Mass Tensioners Various feed hoses from M3 to M8 male thread
For sale is a Stamford LVSI 824 F2 generator with the serial number 0852287/01. This model was originally paired with a Jenbacher 616 engine with the design number B480. The generator has an output of 3,080 kVA at an output voltage of 690 V. The year of construction is 2013, the operating hours so far are 66,000. A Megger test was performed. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please contact us.
For sale is a Newage LVSI 804 S2 generator with the serial number 0856114/01. This model was originally paired with a Jenbacher 612 engine with the design number G168. The generator has an output of 2,560 kVA at an output voltage of 400 V. The year of construction is 2009, the operating hours so far are 60,000. A Megger test was performed. The price of this generator is 14,000 euros. For more information or to arrange a viewing, please contact us.
Impressions=0 m, Condition= Good , Availability= 2025-11-03, Booklet machine !6 stations Suction feeder Horizon MC 80A - SPF-10 II- FC-10 II 1xHorizon MC-80 KOMPRESSOR
Manufacturer: Speedline Model :8000-1 Year of Manufacture: 2010 Condition : Excellent Power (KVA): 4.2 Frequency: 50/60 Hz Largest Single Load: 7 A Full Load Current: 20 A Short Circuit Interrupt Capacity: 10 kA Weight: 680 kg Pneumatic Supply: 80–100 PSI / 5.5–6.9 KPA Find more here - / Contact us at -
new
Recon Part Number: 0400 5793 Water-cooled Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.
Total connected load 21.7 kW Bj Ud Devu Dncevycolp Pump motor 18.50 KW Weight 7,400 KG
Clamping Force: 220 ton // Shot Weight (Max): 625 g
Output: 12000 U/h // Bottle Size: 0,5 l, 1l
Deze trekwerk zaag van ons gerenommeerde merk SICA S.p.a. staat bij Plastima Used Machinery in de machine opslag. De zaag komt uit 2003 en verkeert in gebruikte, maar goede staat. Brand: SICA S.p.A. Bwo Ud Dvstphp Ioycew Model: TRS/U 110-800 Year of construction: 2003 Power: 5.5 kW Pipe outer diameter max: 110 up to 800 mm
An old but functional Kallfass shrink-wrapping machine is available. Seal length: 600mm, max. passage height: 260mm, film thickness range: 12µm-80µm, max. belt speed: 12m/min, max. cycle rate: 20/min, sealing frame dimensions X/Y: 800mm/600mm, max. film roll width: 750mm, working height range: 870mm-970mm, tunnel width: 605mm, tunnel height: 400mm, max. film roll diameter: 300mm, max. film roll core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3400mm/1300mm/1450mm, weight: approx. 750kg. The drive motor is taken out but included. An on-site inspection is possible.
1 hydraulic double-column press, manufactured by Exner, type EX80SB, built in 1987, power 15 kW, pressing force 800 kN, GG 5,300 kg, overtravel 38 mm Find more here - / Contact us at -
Control: OSP-300LA Year of Make: 2019 Distance between tips or spindle lugs: 1085 mm Circumferential diameter over carriage / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm Travel C-axis: 360 mm Travel W-axis 895 mm Main spindle speed: 45 - 5,000 rpm Sub-spindle speed: 45 - 6,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: Conveyor One touch IGF Touchsetter 2x 3-jaw chuck Sub-spindle Coolant Plant HMF-980 Suction
pressure: 85 t chamfer lenght: 2750 mm distance between columns: 2260 mm total power requirement: 17 kW weight of the machine ca.: 8.300 kg dimensions of the machine ca.: 3800 x 2300 x 2400 mm Accessories/equipment: - TRUMPF TASC 6000 - 2 support arms in front of the machine - Lazersafe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ritai 800L holding vessel Stainless, 800L capacity, jacketed vessel, holding tank, central bottom discharge
Ashine: TC800 Serial Number: 25133 Year of Make: 1986 Control: Sinumerik System 8. Tool holder: SK50 Travel X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallets table area: 800x800 Interchangeable pallet system Tool magazines: 60 tools Power supply: 380V 50Hz 55kW.
Key data: 800 mm, 700 mm, 600 mm
Year of manufacture approx. 2002 CNC control MillPlus Plate changer Yes (2-fold) Swivel table No Tool magazine 60 places IKZ/HD cooling Yes Chip Conveyor Yes
The Zafferani FLAT 8FPE L is an electronic straight-line glass processing machine designed for grinding and polishing glass edges. Here are the key specifications of this model: ⚙️Technical Specifications of the Zafferani FLAT 8FPE L Characteristic Specification Number of grinding wheels 8 Glass thickness 3–22 mm Minimum glass size 80 × 80 mm Working height 890 mm Feed rate 0.4–3.2 m/min (16–128 in/min) Weight 2,100 kg Installed capacity 11.0 kW Power supply 230–400 Vac This machine is ideal for precision machining of glass in industrial applications, such as windows, mirrors and interior glass. 02.1.209
bore capacity in steel (diameter): 32 mm throat: 232 mm bore stroke: 150 mm Spindle Speed: 115 - 2470 U/min. weight of the machine ca.: 280 kg dimensions of the machine ca.: 500 x 950 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MIKRON UCP 800 Duro (2018) – 5-axis machining center Heidenhain iTNC 530 CNC Travel (X/Y/Z): 800 / 650 / 500 mm. Table 600 × 600 mm, workpiece weight: 500 kg (5-axis) / 1,000 kg (3-axis) A-axis: +120°/−100°, C-axis: 360° endless Spindle/Adapter: NCD 150 PL & NCD 200 PL, HSK-E63 Dimensions set-up (L×W×H, approx.): 3200 × 2400 × 3200 mm 10,000 KG Control ON: 30,064 h - Machine ON: 10,322 h - Program Execution: 4,159 h Drives ON: 7,331 h - Spindle ON: 4,231 h under power.
Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 80 to PRESS TABLE table surface (left-right): 860 mm table surface (front-back): 620 mm thickness of bolster plate: 70 mm opening in bed (diameter): 165 mm SLIDE table surface (left-right): 570 mm table surface (front-back): 390 mm spigot hole diameter: 50 mm stroke: 120 mm SLIDE (MECHAN. PRESS) slide adjustment: 90 mm stroke min.: 9 mm stroke max.: 120 mm main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 1420 mm space requirements -front/back-: 1700 mm total height: 2990 mm to ...
General SKU316W650 LocationBarneveld MakeCoperion (type plate missing) TypeZVH-250.2-8SC Year of constructionUnknown Main Features MaterialStainless steel/chrome Motor0.55 KW Inlet diameter165 mm Specified Features - Rotating valve MaterialHard chrome, Stainless steel 1.4016, Stellite 1 Alloy Rotary valvecheck Rotor diameter200 mm Rotor width250 mm Number of locks:10 Lock sizes55x180x60 mm Capacityrotor ± 4,75 L Inlet165 mm Outlet50 mm Installation height360 mm With motor0,55 kW, 380/500 volt, 1400 rpm Rotor speed16,6 rpm Outside bearingscheck Information Mounted on framecheck Floorspace1,10 x 0,90 m Total height0,92 m Weight180 kg Technical specs Extra informationcapacity ± 4,7 m³/hRotating valvesCoperionRotary valves > Rotating valvesBrand > Coperion What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...
General SKU300U1181 LocationBarneveld MakePanametrics TypeMagnamike 8000 No.97299607 Year of construction2017 Specified Features - Miscellaneous Motor220 volt Information Total height0,15 m Weight4,6 kg Floor space0,31x0,26 m Extra SpecificationsWall thickness measuring Comes with tooling, Measuring range bullet diameter 1,6-9,6mm, 0-10,2mm MiscellaneousPanametricsMiscellaneous > MiscellaneousBrand > Panametrics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU366W1246 LocationBarneveld MakeVicarb Deutschland GmbH No.1508 Year of construction1989 Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface5.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface5.8 m² Tube capacity26 l. Max. temperature160°C Shell capacity22 l. Shell connectionscheck Cover connectionscheck Information Floorspace0,60x0,60 m Total height2,15 m Weight635 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...
General SKU345S1117 LocationBarneveld MakeHinke No.8980 Year of construction2004 Pressure Working pressure9 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume8425 Ltr. Specified Features - Extraction Capacity8425 Ltr. Diameter1300 mm Length6500 mm Max. temperature80 °C MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information Floorspace1,4x1,4 m CEcheck Total height7,5 m Weight3150 kg Extra SpecificationsMedium fluid group 2 ExtractionHinkeColumns > ExtractionBrand > Hinke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU309T740 LocationBarneveld MakeBEBA Mischtechnik TypeBM 800 Main Features MaterialStainless steel Motor3 KW Rotor70 mm Specified Features - Foam mixer Foam mixeroscillation method Rotor/Stator with pinscheck Rotor sizesdia. 70 mm InletDN25 OutletDN25 Motor3 kW 400-690 Volt With frequency controllercheck With MonopumpNetzsch NM021RY Motor0,75 kW Netzsch NM021RY Speed301 rpm Capacity40-300 Ltr/h MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace2,5x1,2 m Total height1,1 m CEcheck Weight680 kg Extra SpecificationsWith tank: ± 200 Ltr., with jacketFoam mixersBEBA MischtechnikMixers > Foam mixersBrand > BEBA Mischtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...
General SKU294W557 LocationBarneveld MakeSchwarz TypeLP 600/800 No.01-56738 Year of construction1999 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelsOn legs Floor space1,10 x 1,10 m Total height3,0 m Extra SpecificationsVolume 190 l. max pressure 10 bar. max temperature +2°C/+150°C Miscellaneous filtersSchwarzFilters > Miscellaneous filtersBrand > Schwarz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU001U092 LocationBarneveld MakeWaeschle TypeAKA 250.3/8 AC No.42243/04 Year of construction1991 Material Housing materialAluminium Rotor materialAluminium Main Features MaterialAluminium Motor0.37 KW Inlet diameter250 mm Specified Features - Rotating valve MaterialAluminium Rotary valve(1x) Rotor diameter250mm Rotor width180mm Inlet210x180mm Inlet flange sizes320x270mm Installation height400mm With motor0,37 KW, 220/380 Volt Outside bearingscheck Information Floorspace0,6x0,6 M Total height0,4 M Weight110 KGRotating valvesWaeschleRotary valves > Rotating valvesBrand > Waeschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...
General SKU047Y291 LocationBarneveld Makeunknown Year of constructionunknown Main Features MaterialStainless steel Volume800 Ltr. Specified Features - Vertical tank MaterialStainless steel Closed vertical tank(1x) Capacity800 Ltr Vessel sizesdia. 930x1200mm With covercheck Dished bottomcheck Top connections2x dia. 25mm + dia. 80mm + dia. 200mm Outlet± dia. 25mm Information Mounted on legscheck Floorspace1,1x1,1 M Total height2,0 M Weight200 KgVertical tanks-Tanks > Vertical tanksBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU212T501 LocationBarneveld MakeBarriquand TypeIXAP 5+4/8x1 x 1000 x 160 No.213712 B Year of construction2001 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface1.9 m2 Size length1000 mm Sizes width160 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Heating surface1,9 m² CapacityCircuit A (water): 5 Ltr, Circuit B (product): 20 Ltr. Number of platens9 ConnectionsDN25 (4x) Max. temperature-10/200 °C Information Mounted on legscheck Weight350 Kg Floorspace1,25x0,4 m Total height1 m Extra SpecificationsThe Barriquand IXAP 5+4/8x1 x 1000 x 160 is a versatile plate heat exchanger designed to facilitate efficient heat transfer across various applications. It operates through two distinct circuits, A and B, each catering to specific needs. Circuit ...
General SKU345S1067 LocationBarneveld MakeEnco No.3385 Year of construction1994 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume630 Ltr. Pressure1 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity865 Ltr. Vessel sizesdia. 1000x1020 mm Dished topcheck Dished bottomcheck Top connectionsDN50 (2x), DN80 (2x), DN100 OutletDN50 Max. temperature200 °C With jacketcheck (25 Ltr.) Half coil jacketedcheck Max. temperature-5 °C Information Mounted on legscheck Floorspace1,2x1,2 m Total height1,75 mPressure vesselsEncoTanks > Pressure vesselsBrand > Enco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...
General SKU300X420 LocationBarneveld MakeEmo TypeFPAC 800 No.EMO 1467 47-57-30-16 Year of construction2007 Dimensions Cake capacity630 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface46 m2 Specified Features - Filterpress Filter presscheck Filter surface46 m² Number of platens45 and 2 end plates Internal platen sizes730x730 mm External platen sizes800x800 mm Platen thickness60 mm Cake capacity630 l. Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Automatic openingcheck MaterialPolypropylene Information Total height3,0 m Weight6000 kg CEcheck Floorspace6,0x1,75 m Extra Specificationsthis machine is equipped with plate cleaner. with :recessed plates. FilterpressesEMOFilters > FilterpressesBrand > EMO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...
General SKU376X938 LocationBarneveld MakeWalter Brucks Type8HP No.1530 Year of construction1961 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter640 mm Specified Features - Coating pan MaterialStainless steel 1.4306 (304L) Coating pancheck Pan diameter950 mm Pan depth580 mm In-/Outlet640 mm Pan can be tiltedcheck Motor0,55 kW (400 V, 1450 rpm) Pan speed12/20/24 rpm Information Mounted on framecheck Total height1,4 m Weight300 kg Floorspace0,8 x 1,2 mCoating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Inlet size: 820 x 640 mm - With electrical motor - Crusher will be sandblasted and painted
Magnet L x W x H: (1.450 + 650=) 2.100 x 1.200 x 410mm. (130mm. Transportmagnet) - Belt: 1.200mm. - AA.: Ca. 2.850mm.
maximum number of results exceeded
please refine your search
