128,987 used machines on RESALE, but how to find them? Machine Search
Engine Brand: FIAT-IVECO, Conditie: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 300 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/104117, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8281-22; Transport weight [kg]: 1800
Engine Brand: CATERPILLAR, Conditie: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: No , Starter Voltage: No Starter Present , Rated Power: 350 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/28468, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 3408C 48W - 8N1843; Transport weight [kg]: 1850
Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 410.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1900 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 3850 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3412e-80m-1496 377-used/770, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 80M-1496377; Transport weight [kg]: 2500
EASYLAM Expert 80C – Cold laminator, as good as new, built in 2026 Machine:EASYLAM Expert 80C Cold Laminator Year of construction:2026 (purchase January 2026) Condition:As good as new, only used once, technically perfect Technical data: Working width: approx. 800 mm Cold laminator for sensitive prints Portable and flexible Robust construction for commercial use Equipment / Accessories: 2x ORAGUARD 215G, 76 cm x 50 m 2x ORAGUARD 293GF, 76 cm x 10 m Original invoice available (warranty is still running) Areas of application:Advertising technology, print finishing, foil lamination Availability:Immediately available Location:Germany Price:€2,290 VB (incl. VAT) Other:Sale due to cessation of business for health reasons. Note: Private sale under exclusion of liability for material defects. Manufacturer's warranty still valid.
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3512-8br-17552 85-used/266, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 8BR-1755285
Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 362 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71tti-708 2-7300-used/803, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71TTI 7082-7300; Transport weight [kg]: 1700
Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 362 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71tti-708 2-7300-used/801, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71TTI 7082-7300; Transport weight [kg]: 1700
Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 260 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8va-7083-73 95-used/25, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8VA 7083-7395; Transport weight [kg]: 1250
LCD monitor with electronic for Cybelec DNC 800, 804, 806 control . only a few years in use. Supplier / Manufacturer : TSUBIS Germany , Art Nr: LCD10-0072
0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 800 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Basic dimensions: Width: approx. 2,890 mm Depth: approx. 1,100 mm Height: approx. 1,000 mm Note: - The images are used to illustrate the material. - The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. The scope of delivery includes: 02x Workbench stand, used Material colour: sendz. galvanized Stand height: 1,000 mm Stand depth: 1,100 mm Profile dimensions: 90 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench crossbar, used Material colour: yellow Box profile: 120 x 50 mm Clear width: 2,700 mm 08x Screw M10x35 08x Nut Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only a ...
Producer : Windmöller & Hölscher Type : QMS 8510 dismantled and stored Colours : 4 colors, CI With doctor blades Print width : 800 mm Repeats : from 23 – 80 cm There are approx. 300 air sleeves with the machine - size unknown Speed : 150 metres/minute Un-/rewinder : max. 1.000 mm With length slitting Cliché is 2.84 mm thick Find more here - /
2015 Laem System VIS100-800 1. General Characteristics The VIS Machine is designed to correct alignment errors and remove defective spans from finished reels of APET sheets. The machine is bidirectional, allowing the web to run through the machine in either direction: during the first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with the help of a splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed. The splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials. 2. Web materials to be handled - The doctoring machine can unwind, process and rewind APET/PE materials The thickness range to be considered is 50 ...
1998 Sato Elektronik SATRONIK CNC 801 Flame cutting machine Find more here - / Contact us at -
Automatic Transfer Switch - ATS Panel - ATI Panel, 800 Ampere - Applicable for generators up to 550 kVA; Gross weight [kg]: 110
New washer/dryer Manufacturer Getinge Lancer Type GEW P 888-1 electrically heated, single-door version Goods to be washed, glassware and parts of bottling plants Chamber size: 805 x 770 x 805 mm (W x H x D) External dimensions 2,000 x 2,170 x 1,076 mm (W x H x D) Dimensions in disassembled state / min. clearance 2395 x 2100 x 1395 (W x H x D) Weight Approx. 1100 kg (without load) Housing wall stainless steel AISI 304 (1.4301), Ra < 0.9μm Frame AISI 304 stainless steel (1.4301), with adjustable feet. Version Single-door version with automatically operated vertical sliding glass door, for loading and unloading. • Loading area 900 mm • 2 independent washing levels GMP
Block moulding machine with mixing plant for sale. The board paver of the manufacturer Zenith, type 860 AZ, built in 1988, has been in continuous operation at the same location. In addition to the stone paver, the entire production circuit and a production circuit and a complete mixing plant with 3 TEKA mixers (2x THZ1875 and 1xTHZ1125), year of construction 1985. The plant can be fully used after acquisition. The stone paver is still in operation until at least the end of September 2023 and can be inspected in production until then. Stone moulding machine: - Board paver from the manufacturer Zenith, type 860 AZ, year of manufacture 1988. - Production of core and facing - Control Simatic S 5 with visualisation from Zenith - Board size 1,400 x 950 mm - Maximum production height 14 cm - Pneumatic mould clamping Find more here - / Contact us at -
Cold wall plasma system this system has only been put into operation and has not been in use since then. It is used to activate surfaces or can also be used for nitriding processes. The equipment is as good as new and has never been in full production Usable space diameter 800mm Usable space height 1100mm Max. load 1500kg Operating hours only approx. 250h. Technical data: Usable volume DM 800mm H1100mm Max. load 1500kg Max. process temperature 580°C Pressure sensors manufacturer Pfeiffer - Model: CCR 373 Mass flow controller manufacturer Alicat (Ar, N2, CH4, H2) Vacuum pump manufacturer Pfeiffer Duo 65M Plasma generator specification Find more here - / Contact us at -
Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating el ...
Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Drive type: Chain overdrive Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 800 Nominal / outside width in ...
AIRCOOLED CHILLER EMICON ERAH 8120 MC VS HE KE 785 KW Cooling capacity: 785 kW / 223.2 tons (12/7 — 35°C) EER: 3.02 Refrigerant circuit: 2 pcs. Heat exchanger: Shell-and-tube Bitzer SQDS4010214-CE Condenser: Microchannel Type of refrigerant: R513А Compressors: 2 pcs. Bitzer CSVH25-160Y-40A (Inverter screw) Number of fans: 14 psc. Dimensions: 8,5 х 2,33 х 2,64 m. Weight: 6190 kg. Working hours: 0/0 h. Condition: Never used, new
Falch Pressure Washer R10/800, 1000 bar; only 2939 hours in use; complete with accessories as well as two rotary guns. Price basis for negotiation: 15.000,00€ net! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK
C.T.S. Gemini 8002 with simens Simatic and bar feeder The C.T.S. Gemini 802 is an industrial machine designed for precision cutting and processing of materials such as metal or plastic. Manufactured by C.T.S. (Cutting Technology Systems), the Gemini 802 model is known for its efficiency and accuracy in various industrial applications. Key Features: - Cutting Capacity: The Gemini 802 is equipped to handle a range of material sizes, providing versatility in cutting operations. - Automation: Incorporates automated features to enhance productivity and reduce manual intervention. - Precision: Designed to deliver high-precision cuts, ensuring minimal material waste and adherence to specified dimensions. Find more here - / Contact us at -
CAPAICTA 8000 LITRI CAPACITA CIRCA 5000 KG COCLEA PER CARICO BIG BAG NON COMPRESA
The scope of delivery includes: 01x Wooden beams, used Species: Spruce / Fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | Pcs.: approx. 25.67 kg The price shown corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Engine Brand: DETROIT DIESEL, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-12v92ta-812 3-7400-used/830, , = More information =, , Type: Engine, Empty weight: 2.350 kg, Type number: 12V92TA 8123-7400
Key data: 835 mm, 510 mm, 510 mm
Fully Functional CNC Milling Machine Machining Center Vertical DMG DMC 835 V Year of construction 2006 Control: SINUMERIK 840 D Powerline Spindle speed: 12,000 rpm Spindle motor: 14 kW X - Travel: 835 mm Y - Travel: 510 mm Z - Travel: 510 mm A-axis: available Rapid traverse: 30 m/min Tool holder: SK 40 Tool changing device: 30 Table load: 800 kg Clamping area: 1,000 x 560 mm Operating hours: 49,660 | 12,902 h (30.01.2025) Footprint of the machine: 2,100 x 2,700 mm Machine weight: approx. 4,200 kg Equipment SIEMENS 840D ShopMill Linear scales Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy Location of the machine: 76661 Philippsburg The machine can be viewed on site at any time. This is always desired. We would love to hear from you.
MBO foldering machine T 800, config.: 6-4, built 2004, format: max: 78 x 120; min: 15 x 25 cm with Piab air system , serial equipment, slitting shafts in all units and manuals. In very good condition technically as well as folding rollers. More photos on request. Navigator control unit MBO T 800.1-1-78/6- first folding unit 6 pockets auto adjustable MBO T 800.1-2-78/4- second unit 4 pockets manual adjustable Can ship worldwide.
Motore brushless B&R - 8MSA5E-R0-X200-1 Rev.D0 - IN 14.60 A - MN 13.5 Nm - I0 21.80 A - M0 22,0 Nm - NN 4500 min-1 - UN 330 V
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BT pallet lifter, max. lift 800 kg to up to 600mm. In very good condition, excellent quality steel from Sweden.
Single pass - progressive honing machine, SUNNEN MHS 840 (like VSS 84), overhaul and electronic retrofit (see video and photos), 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy, Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke
MACCHINA CON ROBOT INTEGRATO ERC 13/1-E RECENTEMENTE SOSTITUITE GUARNIZIONI GRUPPO INIEZIONE
MBO folder type T 800 6-4, built 2005. With PIAB air system, Navigator control, steel plate in feeder, serial equipment-slitting shafts and manuals. Configuration: 1. MBO T 800 1-1-78/6: folding unit 1 have 6 pockets that can be automatically adjusted 2. MBO T800 1-2-78/4: folding unit 2 have 4 pockets that are manually adjusted 3 MBO Stream delivery. TESTED. All rollers in very good condition. One auto pocket needs new servo motor. Available immediately. Can ship worldwide.
BILANCIA DA PAVIMENTO DIGITALE; DIMENSIONI PIATTO CM 80X80 CIRCA
Key data: 600 mm, 450 mm, 400 mm
x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm Table size: 850 x 440 mm Spindle holder: SK 40 Control: HEIDENHAIN TNC 355 Spindle speeds: 20 - 4000 rpm Spindle motor: 5.9 kW Quill stroke: 80 mm Feeds - longitudinal/transverse/vertical: 1 - 2000 mm/min Feed force x/y/z: 7200 N Rapid traverse longitudinal and transverse: 10 m/min Rapid traverse vertical: 10 m/min Total power requirement: 12 kW Machine weight approx.: 2.5 t Dimensions L x W x H: 2.7 x 2.5 x 2.0 m Handwheel, coolant device
- max. open blacnk width 800 mm - straigh line - automatic crash lock bottom - gluing system with discs - machine in production
maximum number of results exceeded
please refine your search
