sbo 8 used for sale

Fast delivery time! 4x Containerized Siemens G-86EM • Engine; Siemens G-86EM • Year of Construction 2024 • Operation hours; 0 (NEW!) • Electric power; max 2013kWe • Mechanical efficiency; 45,6% • Electrical efficiency; 45,7% • Voltage; 400/415V • Speed; 1.500 RPM • Frequency; 50Hz Gasgenerator, gas, generator, CHP, Power generation only, BHKW, WKK, Combined heat and power, gas genset. Power plant

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, geared motor with brake -Type: SK 530SU-80S/4BRE8 -Speed: 93 rpm -Power: 0.55 kW / 1380 rpm -Shaft: Ø 25 x 45 mm -Protection class: IP54 -Brake: 8 Nm -Dimensions: 435/200/H240 mm -Weight: 21 kg

Grating, grating, light grating, insert grating, insert grating, stair treads, safety steps, grating step, step -Grater step: 800 x 270 mm -Total height: 70 mm -Struts: Wall thickness 2 mm -Floor height: 30/8 mm -Surface: hot-dip galvanized -Quantity: 1 piece available -Weight: 5 kg

6x Containerized Guascor/Siemens G-86EM • Engine; Siemens G-86EM • Year of Construction; 2021 • Operation hours; 12,000 • Electric power; max 2013kWe • Mechanical efficiency; 45,6% • Electrical efficiency; 45,7% • Voltage; 690V • Speed; 1.500 RPM • Frequency; 50Hz

Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: • TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device • DVE 9070 Cover and protective film removal • SFM 5072 Filling and sealing machine • NTS 8140 Transport system • Output max. 36,000 disposable syringes/h, infinitely adjustable • For disposable syringes 0.5 - 10 ml depending on format set • For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set • For 100 mm nest • For tub H max. 130 mm • Parts in contact with the product made of stainless steel AISI 316L • IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English • Calibration (KAL) for all process-relevant measuring systems • Material specification • PLC Siem ...

Electric motor, three-phase motor -Manufacturer: Dietz, electric motor type FDR 80C/ 2 Q -Power: 1.5kw -Speed: 2850 rpm -Shaft: Ø 19 x 35 mm -Construction: B14 -Protection class: IP 54 -Number: 3x motors available -Price per piece -Dimensions: 275/210/H160 mm -Weight: 13.2 kg/pc.

Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 Exhibit Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter condition: Ausstellungsstück Antrieb: SEW Getriebemotor Electric data: 380-400 Bauhöhe in mm (BH): 300 KW: 2,2 Belt width in mm (GuB): 800 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1670 Frame width in m ...

Transnorm curved belt conveyor left 45°-950-800-IR900 RA2306 Technical data: Frame width (NB): 900 mm Frame width with Bearing cover: 950mm Frame width with Bearing cover and Motor: 1250 mm belt width (GuB): 800 mm height (BH): 250 mm Inner radius (IR): 900 mm Conveying angle: 45° degrees conveying speed (v m/s): 0,42-1,50 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2022 Height Sideguides: 200 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2022 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 950 Belt width in mm: 800 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: including side guid ...

Transnorm angled-belt conveyor 45° 1400-1050-800 RA2304 Exhibit Make: Transnorm Year of manufacture: 2022 Inlet angle: 45 Length center: 1400 mm Belt width (RB): 800 mm Frame height: 270 mm Nominal/external width (NB): 1050 mm Conveying speed: 0.717 mm/s V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports angle: 45° KW: 1,5/S1 condition: Ausstellungsstück Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Füße, Movi-Mot Electric data: 380-400 Frame width in mm (NB): 1050 Conveying length in mm (NL): 1400 Belt width in mm (GuB): 800 Construction year: 2022 For individual,  ...

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: Wago, controller Ethernet switch from injection molding machine Demag D 100-275 NC -Type: 750-842 -Dimensions: 70/50/H100 mm -Weight: 0.2 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with electric drive -Roll width: 800 mm -Roll diameter: 110 mm -Axle distance: 200 mm -Drive: SEW-Eurodrive 0.37 kW 1415/64 rpm -Speed: 24 m/min -Total dimensions: 7370/1300/H1080 mm -Weight: 730 kg

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

Kannegiesser belt conveyor Belt conveyor GF 1750-880-800 RA1306 Technical data: Conveying length (NL): 1750 mm Framework width (NB): ca 880 mm belt width (GuB): 800 mm Height/band run (BH): 420 mm +/- 100 mm Number of support feet: 2 pieces Load (kg/m): 75 kg Conveying speed: kontact us Electrical data: 400 V / 50 Hz / 0,75 kW Year of construction: 01/2018 Not the right one for you? On our website you will find more articles or simply contact us. All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 1750 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: inklusive Frequenzumrichter, including supports without side guides For individual, professional advice, simply get in touch with us ...

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 80A -Quantity: 1x power controllers available -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg

Container, granule container, storage tank, powder container, storage tank, color powder container -Container: Stainless steel container with sieve insert -Capacity: approx. 500 liters -Strainer: Ø 10 mm -Container contents: color powder -Dimensions: 1070/860/H950 mm -Weight: 201 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor, two-phase stepper motor -Manufacturer: Nanotec, stepper motor -Engine: 4H561 8M0508 -Gearbox: TECO 2GN 9K -Shaft: Ø 8 x 29 mm -Dimension: 138/60/H60 mm -Weight: 0.9 kg/pc.

Key data: 2013 KW, 690 V

• Engine; Siemens G-86EM • Year of Construction; 2021 • Operation hours; 12,000 • Electric power; max 2013kWe • Mechanical efficiency; 45,6% • Electrical efficiency; 44,4% • Voltage; 690V • Speed; 1.500 RPM • Frequency; 50Hz • Delivery time; Early December • Power generation only, can be equipped with heat coupling • Fat tested, R1 Overhauled (Liners, conrods etc) We can also deliver 690/10.500V Transformators/Transformers Gasgenerator, Gas, CHP, WKK, Power generation, Generator, Alternator, Guascor, Siemens, Jenbacher, MWM, MAN, MTU. Containerized,Waukesha,Power,

mobile workbench, folding workbench, work table, assembly bench -mobile workbench: solid design -Width: 1240mm -Depth: 800mm -Height: 840mm -Weight: 56 kg

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit, hose kit, twin hose, oxyfuel hose -Hose assembly: Acetylene-Oxygen -Type: DIN 8541/3/92/RH -Length: 24 m -Dimensions: Ø 640 x 140 mm -Weight: 13 kg

Key data: 8000 mm, 3000 mm

Large plate field with T-slots Clamping area 8,000 x 3,000 mm Thickness 350 mm. With 12 x T-slots. Total weight approx. 20 t

Inv. Num. : 7892 Type: TruLaser 8000 Producer: Trumpf Created: 2013 Parameters: Switch-on hours: 43109 h Hours: 28857 h Laser power: 6 kW Work table length: 8000 mm Work table width: 2500 mm Source: TruFlow 6000

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: MAHO, Tool changer from CNC machining center MAHO MH 800C -for: max. 24 shots -Recording: SK -Dimensions: 1200/410/H480 mm -Town weight: 106 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A1 -IDENT NO.: 27.71 231 -Dimensions: 400/280/H75 mm -Weight: 1.6 kg

Jungheinrich 8LFP50EVJH Electric pallet truck Serial: F5004035 2022, electric pallet truck, max lift height 1540mm, length of forks 1150mm, mobile, 1Ph to charge

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

Key data: 8000 mm, 2500 mm, 6000 W

8000 x 2500mm 6kw

Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW 072-003 -Item number: 802 265 8 826 058 3. -Power: 75 Ohm/250W -Quantity: 1x resistors available -Dimensions: 110/80/H15 mm -Weight: 0.3 kg

1-door GMP compilant cleaning machine for commercial cleaning and drying of glassware, container and vessels, machine parts, hoses/tubes etc. The unit is unused, as good as new. Max. usable cabine dimensions: 670 mm (height); 610 mm (width); 750 mm (depth).

weight max. in kg: 600 kg fork length: 1150 mm stroke height: 2700 mm total power requirement: ? kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fixed point, fixed Morse taper, fixed centering point, centering points, centering ball, centering mandrel -Centering mandrel: fixed centering ball Ø 84 mm -Receptacle: Morse taper MK5 -Dimensions: Ø 84 x 297 mm -Weight: 5.2 kg

Modular Touch Screen Scale PC Scale BIZERBA Model: KH II 800 Proven quality from BIZERBA! Year of Make: 2020 Calibrated until 31.12.2024 Colour: black with touchscreen on the operator's side Large customer display on the buyer's side Printer: Linerless Printer Multigrade weigher: 6/15 kg Graduation(s): 2/5 g Minimum load (min): 40 g Original price approx. EUR 7,000 Function checked, device ready for use Condition see original pictures! Call or email if you have any questions. 03423-706493

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 800 x 270 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 30/9 mm -Gratings: Hot-dip galvanized -Quantity: 4x grids available -Price per piece -Weight: 6kg/piece

– High-precision dosing, measuring and control technology – Needs-based, field-tested equipment options – High reliability – Stable dampening solution parameters Very little use Absolutely as good as new

Key data: 800 mm, 550 mm, 500 mm

Machine Details Stock-No. 1105-04029 Type of machine Machining Center - Vertical Make MATSUURA Type V PLUS-800 Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Delivery time immediately Freight basis from location, uncharged Price Technical details control Siemens 840D X-Travel 800 mm Y-Travel 550 mm Z-Travel 500 mm type of pallet-changer TABLE 1150 X 550 MM plate size 1150 x 550 mm number of tool places 30 Pos. tool taper SK 40 total power requirement 15/18 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.6 X 2.600 m Additional information The machine can be visited by appointment by electricity. The machine is in very good condition. Changes and errors in the technical data and information Subject to prior sale!

Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 800 x 270 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 25/10 mm -Gratings: hot-dip galvanized -Number: 1x grids available -Weight: 5 kg

Gratings, grating, light grilles, insert grilles, insert grilles, stair treads, safety steps, grating step, step -Grating step: 800 x 240 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bar height: 25/10 mm -Gratings: hot-dip galvanized -Number: 1x grates available -Weight: 6kg

Roller conveyor, conveyor track, roller conveyor support, conveyor track support, support -Support: Adjustable support for roller conveyors or similar -Height: 535 to 820 mm -Width: 480mm -Quantity: 33x supports available -Price per piece -Transport dimensions: 480/130/H535 mm -Weight: 5.5 kg/pc.

CNC controller: FANUC Series 18i-MB Axes X-axis travel mm: 800 Y-axis travel mm: 540 Z-axis travel mm: 540 Distance spindle nose - table surface mm: 45 - 685 Worktable Table dimensions mm: 925 x 540 Max. workpiece weight kg: 700 T-Slot version: 18 Spindle Spindle speed rpm: 8.000 Tool system Tool magazine slots: 30 Max. Tool Diameter: 76 Max tool weight kg: 8 Equipment Chip conveyor Machine running times Under power: 24.000 Basic machine dimensions / weight Length mm: 2.955 Width mm: 2.137 Height mm: 2.713 Weight kg: 6.500

Baking oven with fireclay strip Conveyor belt in refractory stone fillets Self-lubricated bearings for simplified maintenance Stainless steel front, sides, top, and interior The Eco button set the oven on standby during work pauses to save energy Digital control bake time and conveyor speed Conveyor Belt Width：800mm Electrical power: 17-34kW External dimensions: 95x145x110cm Maximum operating temperature: up to 450C

Globoid gear, indexing, oscillator indexer, index gear -Manufacturer: Manifold, gearbox from rotary indexing table type RTU 800 8-150 -Translation: i = 1:8 45° -Dimensions: see photos -Quantity: 2x gears available -Price per piece -Dimensions: 470/375/H500 mm -Weight: 172 kg/pc.

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Workshop trolley: stable tool trolley -4 drawers: lockable, see photos for layout -Contents: 25 tool carriers HSK A63/B80 -Total dimensions: 885/555/H995 mm -Weight: 101kg

liter capacity: 90 l/min tank contens: 100 l voltage: 220 / 380 V tank dimensions ca.: 800 x 380 x 400 mm height with motor ca.: 900 mm power capacity: 2,2 kW weight: 57 kg Condition: unchecked: Base: 820 x 390 x 650 mm The capacity liter is estimated because on the type of the motor is model KMR 90 L 4. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm, 800 mm

For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Diameter: 60 mm -Total length: 840 mm -Shots: 15/12 mm / Ø15 mm M10 see photos -Quantity: 1 piece available -Dimensions: Ø 60 x 840 mm -Weight: 3.6 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, digital caliper -Art.No.: 41 5528 800 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 1x calipers available -Dimension case: 1060/280/H50 mm -Weight: 3,3 kg.

Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

Kannegiesser belt conveyor GF 6000-880-800 RA2299 Make: Kannegiesser as good as new, exhibition machine year of construction 2014 Conveyor length (FL): 6000 mm Belt width (GB): 800 mm Nominal/outer width (NB): 880 mm Conveyor speed: freely adjustable between -0,95 and 0,95 m/s Electrical data: 380V, 0.25kW Without controls/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 6000 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES Engine type: Nord KW: 0,25/S1 Ampere: 0,9 Conveyor speed m / s: -0,95 - 0,95 scope of delivery: without supports and side guides Für eine ind ...

Key data: 700 mm, 800 mm

Machine Details Stock-No. 1105-04033 Type of machine CNC Turning- and Milling Center Make DMG MORI Type CTX beta 800 Year of manufacture 2009 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis ex site Technical details turning diameter max. 390 mm turning length 800 mm control Sinumerik 840D sl Siemens Greates Pass Round Over Bed 700 mm Turning Speed Range - Main Spindle 20 - 4,000 min/-1 Power capacity - main spindle 45 / 35 kW max. torque 700 Nm C-Axis 360° Spindle Nose 220H5 Chucking diameter - mm max. bar capacity 102 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. power capacity driven tool-stations 14.2 kW Spindle speed - driven tool stations 40 - 10.000 min -1 tool taper VDI 40 DIN69880 max. torque 34 Nm X-AXIS 290 mm Z-AXIS 800 mm rapid traverse X: 30 / ...

Dürr / Ecoclean Minio 85C Year of construction 2003 The machine is used by us in 1 shift. Washing baskets: L x W x H 36 cm x 21 cm x 20 cm The dimensions of the system are L x W x H 2m x 1m x 2.65m The empty weight of the system is approx. 2,000kg. Location of the machines: 74219 Möckmühl The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.