We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,595 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: The rope hoist is supplied as standard with: Bracket for suspension Remote control with up / down. Emergency stop. Load capacity in kg 800/400 kg Stroke 6/12 mm Lifting speed 5/8 m / min Power 1.25 kw Connection voltage 230 V. Weight 21 kg Dimensions L x W x H 420 x 180 x 280 mm Approx. Onsite Dimension. (l x w x h): 420 x 180 x 280 mm, weight approx.: 21 kg
used
Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.
used
Kat-No 10-1845 in very good condition! With friction gear motor for infinitely variable speed adjustment Stable and mobile application On frame with steering wheels with stopper, foot-adjustable With guide stripfor bottles and cartons transport Dimensions and weight: Bandwidth:8 cm Total width:38 cm Total length: 830 cm Height:100 cm Weight:200 kg Supplement: 895€ for frequency inverters For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.
used
Kat. No. 09-1049-2 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,050 mms of weight: 106 kg surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Kat. No. 09-1590-2 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws, Ueberdruckventil thread connection carbines DN 25 and with sloping seat discs valve DN 25 Kat. No. contents: Diameter: G flat height: Weight: 09-1590-2 800 litres 1,000 mms 1,550 mms 89 kg upon request: CIP Cleaning Connector fermentation fittings Fermentation lock DN 50 Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Length: 4,700 mm Roll width: 800 mm Roll spacing: 650 mm Roll diameter: 168 mm Recesses: 4 Drive power: 2.2 kW 83 rpm. - mounted with ball bearing rollers on profilesteel frame - Drive by special gear motor - Praezisions roller chain - spring-loaded lashing compensation
used
technical data: Make: Loher Type: LA 80b-4 Types No:: 8235539 Connection: Star 220/380 / 3.4/1.95 A kW: 0.75 kW Rpm: 1410 rpm
used
Cat. No. 11-3600-3 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 1000 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 1000 litres on the top: 800 litres Height on the ground: 2085 mm Height on the top: 1550 mm Total height: 3635 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobil ...
used
Cat. No. 11-3600-4 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 500 litres Height on the ground: 1835 mm Height on the top: 1050 mm Total height: 2885 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...
used
Cat. No. 11-3600-5 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 600 litres Height on the ground: 1835 mm Height on the top: 1200 mm Total height: 3035 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...
used
Cat. No. 12-2130 in a very good condition With Heating and Cooling Jacket with Paddel Agitator DxH: 2100 x 3900 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Italian top make, control Grundig manual-plus V 260, very robust machine! Top width 1500 mm maximum swing over bed 625 mm Spindle bore 105 mm Taper MK 5
new
Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New
GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.
new
Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 870 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.495.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 870 kg capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 870 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!
used
used
Rotary vane vacuum pump lubricated Performance: 12 months Manufacturer: Leybold Type: Trivac D8 B and type BCS available Cat No.: 11296 Status: Generalueberholt and repainted Suction power: approx. 8 m3/h Endduck: approx. 5x10e Operating instructions Delivery time: from stock Please contact further details or technical advice via enquiry; ready for use
new
Euro-Pool Grid Box 800 x 1200 mm New goods, see pictures. External dimensions 1,240 x 835 x 970 mm Internal dimensions 1,200 x 800 x 800 mm Capacity 1500 kg Weight 70 kg Weight 70 kg Load 6,000 kg Colour grey Stack height nested 20 Stack height unnested 5 according to UIC standard 435/3 The front side is foldable. One half is open from above the other half is open from below (see pictures). Price: € 109.00 net per piece from stock Larger quantities on request Goods are in stock. Transport possible on request. Visit possible at any time by appointment. More information on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure co ...
new
- Arbeitsbereich FI 5 - 80 mm - Antriebsmotor 4,0 kW - Absaugmotor 0,5 kW - Spannung 400 V / 50 Hz - Vorschubgeschwindigkeit 1 - 20 m/min. - Schleifbandgeschwindigkeit 1080 m/min. - Schleifbandabmesung 130 x 1850 mm - Abmessungen LxBxH 1050 x 850 x 1300 mm - Gewicht 420 kg
new
- Arbeitsbereich FI 5 - 80 mm - Antriebsmotor 2,2 kW - Absaugmotor 0,5 kW - Spannung 400 V / 50 Hz - Vorschubgeschwindigkeit 1 - 20 m/min. - Schleifbandgeschwindigkeit 900 m/min. - Schleifbandabmessung 130 x 1850 mm - Abmessungen LxBxH 750 x 1000 x 1350 mm - Gewicht 420 kg
used
High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).
used
High temperature kiln with a maximum working temperature of 1.800°C and a descending / pivoting bottom plate. All lateral walls inside the chamber are heated by Kanthal Super heating elements (= MoSi2). Temperature homogeneity is achieved by the use of U-shaped elements that can be taken out downwards. Operating with 3 transformators and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). Kiln is in mint condition (ca. 50 firings only).
used
GP113 - used approx. 15.8 m³ / 15,800 litres PVC-GF tank, aboveground, vertical, flat bottom, in good condition. volume: approx. 15.8 m³ / 15,800 litres material: PVC-GF tank diameter: Ø approx. 2.30 m height: 4.30 m Vertically standing PVC-GF-tank, aboveground storage tank, round shape, flat bottom, access on the tank body, multiple in- and outlets on the rooftop. Tank as shown on the pictures. For media with a specific weight of up to 1.42 kg / L. The container can be used as a storage tank for water, feed, liquid feed, manure, seeping juice, rapeseed oil, or as a rain collection tank, water tank and more. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank ...
used
M. No.: 012440269 Equipment / Additional information: Hz: 50 A: 4 Volts: 220 Bags: 12 STICHER 8002T
used
P119 - used approx. 28.8 m³ / 28,800 litres GF-UP tank / plastic tank, double-walled, flat bottom tank, in good condition. technical details: capacity: approx. 28.8 m³ / 28,800 litres material: double-walled GF-UP tank manufacturer: Formoplast dimensions: Ø approx. 3.0 m x total height approx. 4.5 m certification mark: PA-VI 312.002 (DIBT examination report not available) specific weight: 1.4 kg / L Used storage tank in good condition. The hull will be newly painted in dark green. Double-walled flat bottom tank, aboveground storage tank with various connections such as ventilation, feed, etc., lid on the roof. According to the age, traces of use are present. For media with a specific weight of up to 1.4 kg/L, the tank formerly contained iron(II) chloride. This container can be used as a storage tank for liquid feed, water, whey and many different media. Pric ...
used
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 80,000 litres Diameter: approx. 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...
used
Bosch No. 0811 404 019 with 837001206 and 1 835 100 034 Valve Used
used
2780 x 800 mm picking table packing table, new This is a packing table that is suitable for picking and packaging e.B parcels. However, this packing table is not recommended for welding or factory work. Dimensions workbench approx. 2,940 x 800 x 985 mm (W x D x H) Shelf dimensions approx. 1,730 x 320 x 985 mm (W x D x H) Included in delivery are: 03 x Shelf stand S-1, completely galvanized Total height 1,972 mm Depth up to height 985 mm: 800 mm Depth from height 985 mm: 320 mm 02x shelf stand S-1, completely galvanized Total height: 985 mm Depth: 800 mm 10 x Plastic cover caps 10 x Steel feet 33 x shelf trusses, S - 2, 1.650mm clear width 10 x shelf trusses, S - 1, 600mm clear width 28 x Shelves, H 25, 300 x 800 mm 04 x Shelves, H 25, 150 x 800 mm 06 x Shelves, H 12, 600 x 320 mm 03 x Shelves, H 12, 450 x 320 mm 14x visible storage boxes, new, ...
used
1,500 m² Nedcon mezzanine Column grid 800 cm x 600 cm! Used goods, top condition, as good as new, see pictures Height of the upper edge of the stage 370 cm Load 500 kg/m² Flooring different finishes available. Cargo lifts, stairs, railings and accessories sufficiently available CAD planning and assembly possible Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-c ...
used
used
Machine is equipped wit h HEIDENHEIN DIGITALS 2 TURNING HEADS TURNING LENGHT 1800mm HOLE TROUGH SPINDLE 76mm WITH LINETS AND ACCESORRIESS, READY TO WORK. BEFORE LOADING MACHINE WILL BE CLEANED FOR THE CUSTOMER.
new
Used spiral kneader DIOSNA, type: SP 80 D -Refurbished - for 80 kg of dough or 50 kg flour - Spiral made of stainless steel - Stainless steel boiler - 2 time clocks - 2 speeds - 1 reverse gear - Emergency stop switch - Condition: Very Good - 6 months warranty A video of the machine in operation can be made on request. The kneader is in very good condition and is ready for immediate use. Visit and test run by arrangement gladly possible.
used
Technical data: Turning diameter over bed: 520 mm Turning diameter via support: 310 mm Turning length: 1000 mm Circulation diameter in recess: 580 mm Peak height: 250 mm Bed width: 410 mm Spindle bore: 62 mm Spindle flange: Camlock Gr. 8 Spindle speeds: 24: 9 - 1800 rpm Machine weight approx.: 2.75 t Space requirements approx.: 2.8 x 1.3 x 1.3 m Electrics 380 Volt: 32A Three-jaw lining: 315 mm Forkart Coolant device Measuring system: Glasstab 0.005mm resolution on all 3 axes Quick-release steel holder " Multifix ": C
used
Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...
used
For sale, Dry transformer of 800kVA 10kV to 400 Volt In good working condition
used
Key data: 90 , 10 , 13
High quality oil screw compressor used in industrial plants, factories, production halls and larger workshops. This compressor uses direct drive, which is the most efficient way of drive. The helical stage is directly coupled to the electric motor by means of a flexible coupling. Thanks to this solution, there is no energy loss when transferring torque from the engine to the block, and energy consumption is significantly reduced. Manufacturer: AIRPOL Model: NB 90 Flow rate: 820 m3/h Pressure max. 1.0 MPa Motor power: 90 kW / 160 A Load counter: 24.138 h Weight: 2300 kg Year of Build: 2012 Full DTR documentation and UDT audit book with tank passport Technical condition: used machine
used
SIMOTICS S Synchronmotor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, new -40% Special price The current new price of a similar product is € 1.761 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - SIMOTICS S synchronous motor, 0.82KW, 1FK7042-2AF71-1CH1, Siemens - rpm 3000 - n max. 9000, - With encoder AM24DQI and brake 24VDC - Smooth shaft D19mm - Incl. connection cable and patch cable 16 or 12m - Connection dimensions: Centring D81mm, pitch circle D100mm x z4, Attention: We have the complete winding drive, rewind drive D75mm and D150mm ...
used
Automatic labeller and weigher from the German manufacturer BIZERBA model GV. Automatic labeling and weighing system for packaged products in the food area. Industrial equipment. Equipment ready for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts. High quality equipment and great performance in terms of speed and reliability. Electrical power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Blower labeling compressed air feed: air pressure: 6 bar, air flow: min. 100 l/min, compressed air. oil-free ...
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 35 mm - Shot weight max: 123 g - Injection pressure: 1.964 bar - Injection volume: 0 cm? - Screw speed: 400 rpm - Screw L/D ratio: 20 - Nozzle stroke max: 240 mm - Clamping force: 850 kN - Mould height max: 450 mm - Mould height min: 250 mm - Daylight between platens max: 800 mm - Platen size h: 690 mm - Platen size v: 690 mm - Ejector force: 50 kN - Core pullers: 1 x KDE-6-S-B - Oil tank capacity: 290 l - Power: installed max: 29 kW
6RA 2620 V51-2A 0380/35 Mreg GcG6
used
Steel hall, steel construction, nacelle trapezoidal sheet clad used Manufacturer: unknown Trapezoidal sheet metal clad Dimensions approx. 5 x 5 x 8 m Weight approx. 4 t The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
used
Olland manual slicer, dimensions: 700 mm x 800 mm x 1500 mm.
used
Safeline metal detector, serial number: 89487, 100-240 V, 50/60 Hz, 330 watt, plastic rollers, roller width: 300 mm, clearance: 350 mm x 145 mm, total dimensions: 830 mm x 900 mm x 1150 mm.
used
Included in delivery are: 02x workbench stand, used Material color: white Frame profile: approx. 85 x 65 mm Stand height: approx. 900 mm Stand depth: approx. 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: green INP profile: approx. 80 x 42 mm clear width: approx. 2,880 mm 16x machine screws, M8 x 35 mm 16x nuts, M8 32x Washers, M8 The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place ...
used
Aluminium flat conveyor belt with substructure 7.800mm flat Abm: approx. 7.800 x 550 x 105mm Working height, top edge of the conveyor belt: 650mm Aluminium construction full-surface underlay sheet PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 550mm antistatic due to threads in the fabric of the running side Drive: Gemoteg jack-up motor 0.18Kw, belt speed approx. 0.3m/sec. Connection 220/400V, 50Hz protection class IP54
new
Advantages of Aflatek Air15: -Very compact, easy to transport. -Vertical design, comfortable to carry. -Easy to use. -Requires little maintenance. Technical data: Power supply , V: 230 Motor power, W: 1.8 Motor power, HP: 2.5 Air delivery, L/min: 206 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 15 Dimensions, (length x width x height), mm: 350x350x770 Weight, kg: 21 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 360x360x780 Weight, kg: 22 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
new
Advantages of Aflatek Air50: -50l air tank, longer operation time. -Mounted on 2 rubber wheels, portable. -Easy to use. -Requires little maintenance. Technical data: Power supply , V: 230 Motor Speed, rpm: 2850 Motor power, kW: 1.8 Motor power, HP: 2.5 Air delivery, L/min: 206 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 50 Dimensions, (length x width x height), mm: 840x430x690 Weight, kg: 30 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 850x450x710 Weight, kg: 32 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
used
COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg
used
Diameter above bed: 1360 mm Diameter above the cross slide: 900 mm Peak distance: 5000 mm Space requirement: 10000 2300 mm Machine weight: approx. 15t Flat disc, jacks, chuck, tip, tools