129,477 used machines on RESALE, but how to find them? Machine Search
Container, grit trap, storage container, transport storage container, storage tank, transport container, settling tank for groundwater lowering -Container: Transport storage container -Capacity: 4000 liters -Inner dimensions: 2990/990/H1000 mm -Connections: see photos -Dimensions total: 3570/1150/H1150 mm -Weight: 780 kg
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer, auto-transformer -Manufacturer: OCE Montecchio, Auto-Transformer Type CEI 14-6 -Power: 400 VA -Technical data: see photo type plate -Dimensions: 120/110/H125 mm -Weight: 5.8 kg
Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 400 bar, unused, original packaging -Type: Ø 160 mm 0-40 MPa -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/200/H90 mm -Weight: 1.0 kg
Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm -Weight: 1.8 kg
Brand SEW Eurodrive Type R07 DR63L4 TF AND8 Voltage Volt 3 fase 400 volt Force KW 0,25 KW Rotational speed RPM 405 RPM Shaft size mm Units in stock 1 Length 35.00cm Width 18.00cm Height 15.00cm
A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveillanc ...
2 servo motors 1 engine without nameplate technical data see pictures Condition: unchecked (6) Auction-ID: A7-45761-849
Brake 2x45 Nm, mounted on AUMANN substructure Auction-ID: A1-45682-30
Belt conveyor belts 2 pieces 1x SCHOLZ KMU3500 400, S/N 206 1 1188, 1x SCHOLZ AMN 2000x385, S/N 080070401.0, electromotive, possibly cannibalized
TRICOM S 96V 40A forklift charger for Pb wet batteries
Electric stacker OM CN14 load capacity 1,400 kg built in 2007, 8,446 Bra (19.03.25), weight 930 kg without battery, battery 247 - 318 kg, 24 V, S/N F24525U00831, lifting height 4,565 mm, mast height 270 cm, internal No. 14
Machine type: Tool & cutter grinder / Universal sharpening machine Manufacturer: Tacchella Model: 40 LR Year of manufacture: Unknown Grinding type: External / tool sharpening Machine design: Universal grinding machine with adjustable grinding head Table type: Cross-slide table with T-slots Axis movement: Manual X / Y / Z adjustment Grinding head: Swiveling grinding head for angular grinding Feed: Manual feed system Control: Manual control panel Speed selection: Multi-speed selector (visible) Power supply: 380 V / 50 Hz or 220 V / 50 Hz Condition: Used, visible wear and corrosion marks Remarks: Compact universal sharpening machine for tools, cutters and small components; suitable for workshop and maintenance applications Approx. own mass: 400 – 600 kg Approx. dimensions (LxWxH): 1000 x 800 x 1500 mm Auction-ID: A7-45364-10
Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45833-255
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45833-65
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45834-65
Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45834-255
Docking station LENOVO Thinkpad 40AF, S/N ZHK1902B 20/10
Long material transport trolley VARIOFIT load capacity 400 kg, dead weight 29 kg, blue/wood
Glass display cases each approx. 40x40x160 cm, with hood top, 1 pair, locking cylinder drilled out
Electric stacker YALE MS14AC load capacity 1,400 kg built in 2014, S/N C852T05350M, weight without battery 900 kg, 1.2 kW, battery 274 - 302 kg, 24 V, triplex mast height approx. 185 cm, lifting height 4,627 mm, 3804 discharged. Bra (18.03.25), internal No. 50
used
Digital Height Gauge MITUTOYO HDS 400 mm
Hand workstation 401 m. Matrix rollable approx. 120 cm, lighting, electrification, 3 material rolling stands, swivel stool
excl. tools; equipped with Heidenhain CNC control; machine works well but has little play on the X axis Auction-ID: A1-45793-12
Mercedes-Benz 406D with split body. Reliable classic car with low mileage for conversion. Auction-ID: A7-45828-6
Specifications: Control: Fanuc 0i-TD Hours: 12009 Capacity: - Swing over bed: 970mm - Swing over cross slide: 600mm - Centre height: 490mm - Width of carriage: 885mm - Width of cross slide: 350mm - Distance between centers: 4300mm - Width of bed: 560mm Headstock: - Chuck size: 605mm - Spindle bore: 153mm - Spindle nose: A2-11 - Spindle speed: 6.5 ~ 600rpm - Spindle power: 22/26kW Turret: - Tool size: 32mm - 4 positions Tailstock: - Quill diameter: 165mm - Quill traverse: 200mm - Tailstock center: MT#6 - Body movement: motorized Machine is equipped with: - 2 chip conveyors - Motorized tailstock body - Steady rest - Tooling as showed in pictures - Auction-ID: A1-45752-7
Label Printer ZEBRA ZM400-200E-4000T, S/N 08J104800872
Industrial Generator / Power Unit – Technical Specifications General data: Power: approx. 690 kVA Voltage: 400 V Frequency: 50 Hz Speed: 1000 rpm Current: approx. 995 A Protection class: IP23 Duty: Continuous (S1) Ambient temperature: 40 °C Power factor (cos φ): 0.8 Weight: approx. 2750 kg Control system: Full control cabinet included Siemens PLC (S7-type) Protection relays Circuit breakers and busbars Description: High-capacity industrial power unit or generator system designed for continuous operation under demanding conditions. Equipped with a complete control cabinet featuring Siemens PLC automation, protection relays, and electrical distribution components, ensuring reliable and safe operation in industrial environments. Auction-ID: A7-46032-3
Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-22
Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-21
Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-19
Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-18
Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-20
Cutting Machine – Technical Specifications General data: Slide travel: 500 mm Workpiece support height: 500 mm Cutting capacity (oxy-fuel): With 1 torch: max. 300 mm thickness With 4 torches: max. 100 mm thickness With 6 torches: max. 60 mm thickness Cutting capacity (plasma): With 1 plasma torch: depending on plasma system power Speeds: Working speed: up to 12000 mm/min Positioning speed: 15000 / 20000 / 35000 mm/min Gas inlet pressures (oxy-fuel cutting): Cutting oxygen: 11.5 – 12.0 bar (OmniFlow) Preheating oxygen: 9.0 – 10.0 bar (OmniFlow) Heating oxygen: 1.8 – 2.0 bar Air: 5.0 – 6.0 bar Water: 2.0 – 6.0 bar Gas inlet pressures (plasma cutting): All gases: 12.0 bar Description: Industrial cutting machine designed for oxy-fuel and plasma cutting applications. The system supports multiple torch configurations and offers high cutting capa ...
Double swing gate complete set (height: 1,400 mm) Details: Description: Double bar mesh fence gate complete set (height: 1,400 mm) Details: 1.4 m x 3 m, complete set including post and handle set/fastening material Colour: Anthracite (RAL 7016) Gate: Frame 60/40 (1,400 mm high and 3,000 mm wide) Posts for concreting: 2,400 mm (80/80) Door panel: 6/5/6 Mesh size: 50mm x 200mm Number of doors: 2 Number of posts: 2 Location: 32602 Vlotho Auction-ID: A1-46075-47
Galvanized steel; top profile 50x30x2, bottom profile 50x30x2, cross braces fi 12, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461 Auction-ID: A1-45756-18
New Trapezoidal Steel Sheet T-35 – RAL 9006 Trapezoidal steel sheet T-35 for roofing and wall cladding applications, made of coated steel. Specification: Profile: T-35 Length: 6,500 mm Thickness: 0.5 mm Color: RAL 9006 (white aluminium) Coating: protective + anti-condensation (felt) Anti-Condensation Layer: absorbs moisture prevents water dripping reduces corrosion risk protects structure and stored materials Packaging & Delivery: Sheets secured for transport. Auction-ID: A1-45756-36
Galvanized steel; top profile 50x30x2, bottom profile 50x30x2, cross braces fi 12, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461 Auction-ID: A1-45756-12
MAN TGS 33.540 6x4 BL – Truck with Loading Crane General data: Manufacturer: MAN Model: TGS 33.540 6x4 BL Serial number (VIN): WMA30SZZ9BM567249 Year of manufacture: Unknown Condition: Used Power: approx. 540 HP Drive: 6x4 Gross vehicle weight: approx. 26000 kg Dimensions (L x W x H): approx. 10000 x 2550 x 3800 mm Equipment: Hydraulic loading crane Crane: Kogel, 10 ton-meter, hydraulic telescopic arm + rotor + grab Reach: approx. 9 – 10 m Lifting capacity: approx. 3500 kg (close range) to 1000 kg (full extension) Maximum pulling force: 200 kN Trailer coupling Timber stakes for log transport Reinforced chassis Multi-axle configuration Description: Heavy-duty truck equipped with a hydraulic loading crane, designed for forestry, recycling, and construction applications. The vehicle allows self-loading and unloading of bulky materials such as logs, scrap, or ...
New Steel construction 16 m x 25 m Galvanised steel Side column 7 m high The structure is made of IPE 220 Frame spacing every 5 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings - brace; Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Auction-ID: A1-45756-40
Cardboard boxes 1,200 x 300 x 400 mm and 1,200 x 300 x 200 mm each approx. 150 pieces on a pallet
Chain slings 2-arm approx. 40cm, 2 pcs., with steel cables
Bolt Setting Tool SPIT P60 BS 4078, SN 001002 Small quantity Accessories, Case
Built-in loudspeaker BOSE FreeSpace DS 40F 49 pieces, white frame, 40W, playback 80 Hz - 16 kHz, 125 conical cover pattern, weight per piece approx. 3.7 kg, dimensions of outer flange diameter approx. 299 mm, cabinet height approx. 164 mm no cover grille, total diameter 300 mm, completeness and function not tested
Siemens SINAMICS G150SC industrial frequency inverter in cabinet, high performance, ideal for demanding industrial applications (pumps, fans, conveyors, production machines). ✔️ Key features: Brand: Siemens Series: SINAMICS G150 Model: G150SC (Single Circuit) Power: 250 kW Voltage: 400 V Type: In-cabinet frequency inverter Year: 2024 Condition: New / never put into service ✔️ Configuration / options: Single Circuit Options: D14, D58, L00, L08, M06, M90, T58 Designed for heavy industrial applications ✔️ Advantages: High reliability Siemens Energy optimization Precise motor control Suitable for many industrial sectors Auction-ID: A3-43519-38048
Chuck for self-centering lathe 3 + 3 jaws 400 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 500 x 470 x 245 mm; Approx. Weight: 74kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-334
The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilation and light: The upper slats are adjustable, allowing precise c ...
maximum number of results exceeded
please refine your search
2.500 € 
