sb 40 used for sale

Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.

Vertical turning machine manufactured in 2000. This EMAG VSC 400 features an X-axis travel of 850 mm and a Z-axis travel of 315 mm. It is equipped with live tools for enhanced functionality and track motion loading for efficient operation. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 4 EW15° 4GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 3,75 EW20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working widths: 4000 mm Roller width: 4200 mm Number of rollers: 2 Stück Supporting roller - dia: 490 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 21 to Liquor trough with guide roll: heb + senkbar Cloth guiding system: Leitwalze vor der Fuge Drive side: Links Operting side: Links Compensator: pneum. Entlastung Drive shaft: Durchmesser 70 mm required power: 30 m/min =10 kW Hydraulic unit for combined pressure: • 2-Bowl-Finishing-Padder with 1 Swimming roll (S-Roll), • with double-trough for double-dipping • can be used as full-bath-dipping or indirect back swash • machine can be compeletely overhauled before delivery (The picture is showing a scheme of this padder type) • in addition a new frequency drive is possible for the adaption of this machine into a co ...

max. width of grinding wheel: 195 mm diameter / bore of grinding wheel: 75 mm Flange taper: Reishauer Grinding disc flange for machine type Reishauer RZ 400 For mounting ceramic grinding discs for tooth flank grinding - 125 mm wide, dimensions according to machine type Reishauer RZ 400 16 pieces available, price is per piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fischer 2051 (4051) Leaf blower for three-point attachment Cat. I and II, front or rear attachment. PTO drive 540 1/min. Turbine flow rate up to 300 m³ / min. . More green maintenance technology from A to Z and much more in stock - see sample photos! More objects also under > jodau > Used machines ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

This 3-axis Durma AD-R 40175 was manufactured in 2022. It features a bending length of 4,050 mm and a bending force of 175 tons, providing robust capabilities for various applications. The machine is equipped with a DURMA DT15 CNC control system and a 3D touch screen interface for enhanced usability. If you are looking to get high-quality bending capabilities, consider the Durma AD-R 40175 press brake we have for sale. Contact us for further details.

Pökomat Steaker M 400-4, approx. 396 needles

Inv. Num. : 7711 Type: VM Multi 400-1 Producer: Schmalz Created: 2021 Parameters: Load capacity: 275 kg Weight: 75 kg

for sale GIS Piston Compressor GS25/150/400/T Boiler capacity 150 litres Suction capacity 400 min./l Motor 3 HP, 400 V mobile Total weight approx. 80 kg Other models available, inquiry to FSA Maschinen AG

Key data: 320 KW, 400 kVA, 400 V

Make Iveco - AEM Model: 400 kVa diesel generator set Year of manufacturing: 1997 Serial nr: 12-8040-0001 Working hours (on servicemeter): 39 Capacity (KvA) 400 Capacity (Kw) 320 Engine make Iveco Engine model 8281-SRI-26SE Fuel Diesel Alternator make AEM Alternator model SE 315 L4 Voltage 400 Frequency (Hz) 50 Rpm 1500 Amperes (A) 577 Dimensions LxWxH (mm) 3250 x 1500 x 2100 ( set ) Weight (Kg) ca 3400 Total quantity in stock 1 Country of origin Set assembled in Germany Comments Used but almost new condition with 39 hours only, complete with panel and 2000 ltr fuel Bowser

Key data: 400 KW, 570 kVA, 400 V

Dear Ladies and Gentlemen, We hereby offer the following a MAN CHP in a container for rent! Year of construction 2014 Starts: 757 Hours: 11448 BH. Electrical Power: 400KW Thermal power 445 KW Dimensioning: Thickness: 100/140 mm insulation Length: 10000 mm Width: 2800 mm Height: 3200 mm Paintwork: Moss Green Contents in the container: MAN gas engine with generator on substructure Central heating Heat exchanger Switchboard Gas control unit Static power supply Exhaust silencer inside Auxiliary silencer above the container Insertion loss 65dBA in 10m Data recording Gas blower Combimac blue 65mbar gas pressure Gas Flow Meter Gas vacuum monitor Return temperature increase Exhaust gas heat exchanger with bypass Gas warning system Wind Vane Guardian Flame detector 1000 l each of used and fresh oil tanks with pump and hose reel Intrigued  ...

Robot Laser Welding and Cutting Cell / Laser cutting and welding cell Year of manufacture 2018 Wenige Arbeitsstunden / not many working hours Robot Fanuc M-710iC/70 Control CNC: Fanuc R-30iB) + MFP Payload / lifting max: 70 kg Repeatability: ± 0.04 mm Working range: 2050 mm IP54 Fiberlaser source: IPG Photonics Model YLS-4000-S2T-Y16 Power: 4kW Cooling system. Two outputs optical and permanent connections of welding and welding Laser Cutting Heads / Two outputs optical and permanent connections of welding and laser cutting heads. Source dimensions: 856 x 806 x 1206 mm; Weight / weight: 330 kg; Power supply: 400–460 V/3P + PE at 50–60 Hz; Operating current at: 4000 W and 400 VAC: 20 A Laserschneidekopf / laser cutting head: HIGHYAG BIMO-FSC Laserschweißkopf / laser welding head: IPG Photonics. FLWO-D30 Vertical Welding: Fronius 7000 Doppe ...

Press force max.:: 1600 kN heating plates:: 400 x 400 mm electrically heated:: -- °C heating power:: 9,92 kW piston stroke:: 400 mm no. of stages:: 1 Condition: Used, Specification: Press 400 x 400 mm, second-hand steel frame construction - Clamping force: 160 tonnes - pressure force: 1600 kN - Operating pressure: 300 bar - Closing: from bottom to top - Heating platens: 2 electric platens - Heating power: 4.96 kW/platen - Heating platen dimensions: 400 x 400 mm - Specific pressing pressure: 1000 N/cm² - Distance between the heating platens: 500 mm - Piston stroke: 400 mm - Piston diameter: 260 mm - AC motor power: 7.5 kW - Pneumatic protective cover in the front area, - lifting device - Sliding table - Approx. dimensions: 1,760 x 1,150 mm - System height approx.: 2,470 mm - Weight approx.: kg The data for this ad was cr ...

Key data: 4050 mm, 10 mm, 1000 mm

brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE  ...

Specifications Maximum pressure: 6 tons Press force: 2.5 kg/cm² Bale size: 600x400x500 mm Bale weight: approx. 50 kg Power connection: 400V / 2.2 kW Year of Make: 1995 Productivity: approx. 3 bales/hour Shredder Cutting width: 5.8 mm Power connection: 380 V/ 4 kW Year of Make: 1994 Safety level: DIN 66399-1, 5.2 P-3 /O-2/T-2/E-2/

faceplate diameter: 400 mm total power requirement: kW weight of the machine ca.: 0,08 t dimensions of the machine ca.: m 1 pc. faceplate - diameter 400 mm bore 125 mm fastening 4 screws: 185 M 10 KK 160 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MACC Aluminium Circular Saw TA 400 TCT circular saw blade 400 mm Section cap. up to 140 mm round Coolant pump Attack Speed 3000 rpm Motor 2.2 kW, 400 V incl. machine base Weight approx. 160 kg

Plastic crates, pizza parlors/bun trays, plastic box, plastic crate used Insert without cloth Size 60x40 H4cm, Color: white, Finish bottom to and sides with holes 6,250 Units in Stock - Bakery condition not cleaned

Manufacturer: Multivac Type: Vacuum machine Model: C 400 Chamber depth: 470 mm Chamber height: 170 mm or 250 mm Sealbar configurations: front 650 mm + right 450 mm left 520 mm + right 520 mm left 520 mm + right 520 mm + front 520 mm front 700 mm Voltage: 3 x 400 V 50 Hz Incorporated vacuum pump: 100 or 140 m3/h Main material: Stainlees Steel Machine weight: 250 kg

Key data: 6 KW, 7 kVA, 400 V

Emergency power generator, power generator, Bauer GFS-6 ATS, unused, orig. packaging, never been in use! Continuous power of 6 kW / 7.4 kVA. LxWxH 1,070 mm x 745 mm x 815 mm Weight 180 kg Net weight. Easy operation and maintenance. Specifications: Max. power [kW/kVA/HP] 6.5 / 8 / 8.87 Continuous power [kW/kVA/HP] 6.0 / 7.4 / 8.15 Nominal voltage [V] 230 / 400V Frequency [Hz] 50 Speed [rpm] 3000 Power factor [cos f] 0.8 Tank capacity [L] 20 Housing colour RAL 3000 Running time approx. 8-10 hours per tank Operating noise: Sound pressure level LPA [7m] [db(A)] 75 Engine: Power 8 kW / 9.0 kVA / 10.8 hp 1 cyl. Diesel Fuel Type: Diesel Emission standard: none Number of cylinders 1 Starter Electric with Battery On-board voltage [V] 12V Battery voltage [Ah] 230 / 400V Cooling System Air Cooling Generator: Model 6.5 kW 3000 rpm Generator system Brushless, self- ...

Punch power: 400 kN table surface area: ca. 1250 x 700 mm throat: 500 mm hole punching press: capacity (dia. x thick.): 100 x 3 mm hole punching press: capacity (dia. x thick.): 75 x 4 mm hole punching press: capacity (dia. x thick.): 30 x 10 mm x-travel: 700 mm y-travel: 470 mm total power requirement: 4 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aerre CL 4080 vertical machining centre :::TECHNICAL SPECIFICATIONS::: CNC Model: ECS Tool Attachment: ISO 40 Spindle power: 5.5Kw Number of spindle speeds: 6000 Number of tools: 20 X-axis travel: 800mm Y-axis travel: 400mm Z-axis travel: 500mm Table dimensions: 900 x 400mm Guides: flat :::D DIMENSIONS AND WEIGHT::: Length: 2900mm Width: 2300mm Height: 2850mm Weight: 4100Kg

Make: BITZER Type: 6H-35.2Y-40P Flow rate: 110.5 m³/h Speed: 1450 rpm Operating current: 61A incl. BITZER liquid collector Type: F1052T Year of Make: 2008 Volume: 105L Min/Max Temp.: -10°/120°C Max. permissible. Pressure: 33bar Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Key data: 400 l/min, 6

Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...

Key data: 400 t

DURENDUS 400 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 35.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of ...

Año 2015 Compuesto de alimentador FFU-4055, unidad de troquelado RD4055 y módulo SPC-4055 Pliego: mín. 200 x 275 mm / máx. 400 x 550 mm Producto final: mín. 50 x 80 mm / máx. 375 x 526 mm

Winder : Bandera Model W 400/1 Contact winder / surfacewinder Roll diameter max: 1200mm Roller width: 1200mm Roll width max: 1100mm Speed: max. 55m/min Longitudinal cutting device 2 or multi-lane Side Slitting Device Automatic roll change Cross-cutting device Role magazine Calibration device Reifenhäuser Low-friction rollers motor adjustment Adjustment range: for 500-1100mm laying width takeoff unit: Type TPE-1200 Side gusset insertion device Drive: 4-pole 4kW with axial fan Electric cabinet

2x Aprovis flue gas heat exchanger Year of Make: 2013 Price: per AWT 2.500,00 € (net) For more information, see pictures. Sale due to site conversion and plant renewal. More pictures, information and offers on request.

Commonrail Injection Pump ( New from stock ) For MTU engines : 12 V 4000