137,081 used machines on RESALE, but how to find them? Machine Search
WEIBERT WJ-K315-A new Sliding table saw The original Weibert sliding table saw should be it! Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!
Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg
WEIBERT WJ-K315-A new Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!
Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates
Gebr. Band saw Mössner SSF 420, built in 1973 Technical data (Mössner SSF 420) • Impeller/roller diameter: 420 mm • Max. cutting width / projection: approx. 410 mm • Max. cutting height / passage height: approx. 230 mm to 265 mm (depending on year of construction/version) • Work table size: approx. 600 x 600 mm (or 605 x 605 mm) • Table adjustment: can be tilted to the right and left (usually up to 15°–30°) • Cutting speed: Infinitely variable or via gear stages (approx. 12 to 2,000 m/min, ideal for steel, non-ferrous metals and plastics) • Saw blade length: approx. 3,150 mm to 3,260 mm (bandwidth usually from 3 to 16 mm) • Drive power: approx. 2.2 kW (for older models sometimes from 1.7 kW) • Electrical connection: 400 V / 50 Hz (three-phase current) • Machine weight: approx. 600 kg to 800 kg (solid cast iron construction) • Dimensions (L x W ...
Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230
Technical Data (MEP Circular Saw / Cross-Cut Saw - Type C100 / C-Series) Machine type: Manual or semi-automatic metal circular saw / cross-cut saw for precise cuts (steel, non-ferrous metals or profiles depending on the equipment). Saw blade diameter: Typically designed for carbide or HSS saw blades in the range of approx. 250 to 315 mm (for clean, burr-free cuts). Swivel range / mitre: Flexibly adjustable saw head or rotary table for angle cuts (usually 45° left to 45° right or infinitely adjustable). Cutting range (guideline values for this class): Round material at 90°: approx. 85 to 100 mm Square / profiles: approx. 80 x 80 mm to 100 x 70 mm Drive / Power: Robust 400V three-phase motor (often switched in two stages for different cutting speeds depending on material hardness).
Machine: joining, veneer cutting machine Brand: Langzauner Type: LZ 4/2E 3.050 Year of Make: 1998 CE Specifications: Working length: 3,050 mm Cutting height: 45/55 mm Motor power: 2.2 kW each Suction duct: Yes Support table rear: Yes, 3,050 x 500/800 mm, with hinged insertion shoes for stop depth 800 mm Rear Rip Fence: Yes, 650/ 800 mm, incl. digital display Rack & Pinion Balancing: Yes Milling unit: Yes Front support table: Yes, movable Saw carriage feed: via electric motor drive and Stepless speed control
Offer 24272 Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting area - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm
Motor 1.3 kW/400 V/50 Hz/3 A, swivel -20° to +70°, pneumatic clamping, suction nozzle 80 mm
PAUL CNC cross-cut machine 18KE - year of construction 2019 - unused - luminescence probe - 11 kW For sale is a PAUL CNC cross-cut machine model 18KE, built in 2019 The machine was originally ordered for an industrial project and has never been used in production. The original PAUL delivery documentation with detailed equipment is available. The 18KE is part of the PAUL series of CNC optimisation cross-cut saws for heavy timber. In particular, the 18KE is designed to cut defects by means of luminescent switches and chalk marking. Technical data o Manufacturer: PAUL Maschinenfabrik GmbH & Co. KG o Type: CNC cross-cut machine 18KE o Year of construction: 2019 o Ready for shipment according to delivery note: 09.11.2020 o Machine weight: approx. 1,850 kg o Connection: 400 V / 50 Hz o Connected load: 17.6 kW o Saw blade: HM, Ø 800 mm o Saw blade bore: 100 mm o Saw blade speed ...
Band Saw Make: Behringer Type: HBP 340-700 G Year of Make: 1991 Weight: approx. 1,700 kg -Clamping width: 340 mm x 700 mm -Saw blade: 5800 x 38 x 1.3 -Chip discharge: small conveyor belt -Micro and minimum quantity lubrication -Rotatable foundation frame via handwheel for mitre cuts up to 45° -Hydraulic saw blade guide -Hydraulic clamping jaws -Cutting pressure control valve -Automatic high-gear shutdown -Feed roller conveyor 6 m -Discharge roller conveyor 4 m -Measuring device with stop No guarantee, no return, no warranty Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.
I sell an automatic pneumatic cross-cut saw GreCon Dimter 2004, built in 1992. Entrance table automatic / continuous system Exit table 3 ejectors on the left outlet table. Length: 15.50m Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. Spare parts and documents included.
Key data: 220 mm
MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg
AUTOMATIC MULTI RIP SAW model KUANG YUNG MRS 350 - TAIWAN cast iron machine structure CE regulation: YES with instruction booklet and CE declaration of conformity electric lifting pressure unit automatic lubrication of the carpet Technical details : max.height of cut mm.135 max.working width mm.350 minimum length of cut mm.650 max.diameter of blades mm.405 min.diameter of blades mm.300 arbor sleeve mm.70 main motor power Hp 50 feed motor power Hp 2 motor power lifting pressure group Hp 1 arbor speed rpm 3000 variable carpet advancement speed. from 7.3 to 30 m/min. net weight kgs.2400 volt. 380/50
AUTOMATIC DOUBLE MITRE SAW model OMGA TR 2B N oleo second hand machine in Excellent working condition , like new for cutting wood, frames, pvc, aluminium, plastics and various materials CE compliant machine: YES oil pneumatic downstroke of the blade groups alternate or simultaneous blade descent inclination of cutting blade groups + / - 45° bimanual control from the control panel n.02 motors . power Hp 3 each one blades diam. mm. 350 max. useful cutting length mm.2800 min. useful cutting length mm.320 max. useful cutting width 90° mm. 170 x 102 H max. useful cutting width 45° mm. 110 x 102 H volt. 380/50 weigth kgs. 600
Motor 1.5 kW/400 V/50 Hz/16 A, table 450x500 mm swivel 45°, wheels saw blade 400 mm, belt guide bottom+top, max. saw height 225 mm, rip fence 450x90 mm, suction nozzle 100 mm, incl. saw blades 2 pcs. 10 mm and 3 pcs. 20 mm, bearings of motor and impellers have been renewed, control and drive belts have been renewed
Cutting length 4100 mm, further data on request
I am selling a KÜSING RP-200 multi-blade saw. It is a small, compact multi-blade saw with a shaft length of 200 mm. The machine is designed to be open on one side. It is ideal for ripping, precision cuts or machining short workpieces from a length of 200 mm. Technical data: Maximum cutting width 200 mm Maximum material height 80 mm Shaft diameter ø 30 mm Saw blade diameter ø 200 – 300 mm Saw blade speed 4000 rpm Motor power 7.5 / 11 kW Feed motor 0.55 kW Material feed speed 2 – 20 m/min Extraction connection 2 x 120 mm Machine weight 500 kg The machine is manufactured in Slovakia. It is possible to configure the machine according to individual requirements.
Year: 2020 - technically efficient, ready to work - after full service - automatic feed - disc diameter: 400 mm - cooling system - disc rotation 45/90/135° and tilt 45° - vertical and horizontal pneumatic pressure - compressed air preparation station
Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550
cutting diameter: 320 mm saw band length: 4570 x 27 x 0,9 mm table height: mm cutting width: 450 x 280 mm power capacity: 4,0 kW cutting speed: 15 - 105 m/min engine: 380 V total power requirement: 4,0 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Band saw with - coolant device - mitre device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Multi-rip saw Raimann Type: KR 230 D Year of Make: 1992 Width adjustment with 1 movable saw blade with return transport railways Transport chain has already been renewed Transport chain in good condition Feed speed 8 – 35 m/min. Feed motor 1.1 kW Saw motor approx. 22 kW Clamping width of the saws 230 mm Width of the transport chain 250 mm Projection from the centre of the chain to the bracket approx. 300 mm Working height 850 mm Table width to the left of the chain approx. 300 mm Table width to the right of the chain approx. 170 mm Table length 2190 mm Max. cutting height = largest free passage with saw blade diameter 380 mm Cutting height without pressure screen max. 130 mm Cutting height with pressure screen max. 120 mm Shortest timber length without pressure rake 750 mm Shortest timber length with pressure rake 290 mm Pressure rake in the trough 15 mm Ext ...
Code: 0498 Brand: ALTENDORF Model: START 45 - CE Standard Panel saw with tilting blade and scoring unit for precision cutting of panels, joinery, furniture, bespoke fittings, kitchens, doors, window and door frames, plastics, aluminium and various other materials – CE Standard – Year 2017 Technical data: Aluminium carriage length 3200 mm Max blade diameter mm 315 Hole 30 Max cutting height mm 100 Manual blade lifting and tilting Scoring unit diameter mm 120 Hole 20 Parallel guide width mm 1300 Blade guard Guide for mitre cuts Worktable height mm 885 Suction inlet diameter mm 100 Overall dimensions of assembled machine mm 3400 x 3350 x 1050 h Overall dimensions for transport mm 3400 x 2000 x 1050 h Weight kg 750
STROMAB pneumatic cut-off machine mod. TR 500 – CE standards – used - With 4000mm TIGERSTOP electronic positioning stop - Table with 4500mm infeed rollers - Table with 4500mm outfeed rollers - Blade diam. 500 - Maximum cutting capacity: 360 mm (L) to 60 mm (H) 135 mm (H) to 280 mm (W) - 10 hp motor - 415 volts - Matr. 1377 - Year 2007
Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER
Best price, while stocks last EISELE high-performance circular sawing machine VMS 370 - the ORIGINAL - made in Weilheim/Germany Equipped to accommodate saw blades up to 370 mm in diameter. Min. / max. cutting range at: 90° 45° Round (in mm) 10 / 130 10 / 130 Square (in mm) 8 / 120 8 / 100 Rectangle (in mm) 8 x 8 / 200 x 100 8 X 8 / 140 x 100 Smaller cross-sections on request. When using a 30 mm insert jaw. With pole-switchable three-phase motor, 2.0/2.6 kW, including clamping device to the left and right of the saw blade, stationary base frame with built-in coolant device and chip drawer, material support height 900 mm. Machine design according to CE. Sawing machine is designed for voltage mains 400 V / 50 Hz. (3LNPE400V/50Hz). Guaranteed spare parts supply for 10 years Standard version with 17/34 min-1 or 34/68 min-1
Trak tasmowy Primultini SG1300 ,wozek podawczy CEE IEC,dlugosc wozka 5 metrow
Multi-Blade Saw Costa Leopard S Year: 1981 Cutting height 220mm 2x75hp new conveyor belt, replaced in 2015 Width chain: 370mm Cross conveyor 5 strands
Key data: 150 mm
ALDURO Metal Band Saw MBS-180SK Section cap. up to 180 mm round 4 belt speeds 22 / 33 / 45 / 65 m/min. Vise opening 260 mm Cooling system Hydr. Lowering Motor power 0.75 kW, 400 V Weight approx. 130 kg 0041 62 922 68 28
WEIBERT WJ-K315-A Sliding table saw Format sliding table: 3000mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A
Mobile log saw Pezzolato timmber quenn 600 fully hydraulic diesel engine
RAIMANN KR 310 M ProfiRip Board measurement with automatic saw blade adjustment Optimization for the best possible width distribution Quality division of the boards Workpiece data max. cutting width 310 mm Total passage width 800 mm max. cutting height with blade adjustment without pressure screen 115 mm max. cutting height with multi-blade adjustment without pressure screen 130 mm with pressure screen 115 mm min. cutting height 10 mm min. workpiece length 740 mm Pull-out roller / top pressure roller Locking pressure screen Pneumatic pressure rollers Machine data 2-fold saw blade adjustment 4 x Laser Directional Light Cutting Indicator Control model Proficut with Siemens PC Simatic touch panel Control panel mobile Transport chain with spikes – width 340 mm Automatic chain lubrication with oil level monitoring Diameter saw shaft 65 mm Diameter of socket 80 ...
used
Crawler multirip saw SCM M3 Track width 300mm Cutting height max 120mm Main motor power 25kw Feed speed adjustable on the variator 6-45m/min Disc diameter max/min 350/200mm Minimum element length 600mm 3 rows of anti-recoil pawls Spindle diameter 50mm Sleeve diameter 70mm Central Track Lubrication Extraction spigot 200mm Machine weight 1660kg Machine dimensions 170x150x150cmH Net price
1 used ACM STAR 700 Vertical Bandsaw New in 2015, as is where is Including Transportdevice
cutting diameter: 460 mm saw band length: 0/ mm table height: 0/ mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Offer 24455 Specifications: - Saw feed via hand lever - Saw blade diameter 315 mm - Largest opening width vice approx. 160 mm - Cutting range approx. at 90° around 100 mm - Flat up to 135 x 80 mm - Cutting range Li + RE at 45° around 108 mm - Flat up to 100 x 80 mm - Cutting range Li at 60° around 80 mm - Flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg
Oscillation: ja ja / nein : ja ja/nein : ja ja/nein tiltable up to: 45/90 Grad Motor output: 3 kW Table dimensions: 750x350 mm sanding width: 150 mm Weight: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cross-cut line Opticut 150 -4 4 ejections built in 2004
CUTTING RANGE . MIN 10MM TO 75MM CUTTING LENGTH . 5-900 SINGLE STROKE -9999 REVERSE CUTTING SPEED. 0 - 40 MM SEC. INFINITELY ADJUSTABLE BACKWARDS 135MM/S MATERIAL FEED SPEED . MAX. 350 MM/S Pwrxaerqe RESILIENCE. MAIN CLAMP 10500N
SKU BS-250M Return Manual Rake angle adjustment Ehrwinkelkopf Grit angle 1 – 60° Motor power 2.2 kW Cutting area 90° rectangular 259 mm x 110 mm Capacity Round 90° x 45° x 60° 227mm / 150mm / 90mm Square capacity: 90° x 45° x 60°, 220 x 220 mm / 144 x 144 mm / 84 x 84 mm Table height 889 mm Strip guide carbide and ball bearings Belt dimensions (H x W x L) 27 x 0.9 x 2470 mm Blade speed 20 - 85 rpm Lowering Control Hydraulic Support Drive Gear Operating voltage 230 V, 50 Hz, 1-phase Delivery weight: 216 kg Shipping dimensions (L x W x H) 1524 x 1118 x 1219 mm
MEP Shark 260 Price 1650 Adjustable gravity lowering Round tube cutting capacity mm. 210mm. at 90° Cutting capacity with square cross-section mm. 200mm. at 90° Cutting capacity other cuts 270x200 mm. Head motor power kw.1.8 Engine revolutions 2 speeds RPM 36 - 72 Strip development diameter 2750 x 25.4 s. 09mm. User Manuals CE Declaration of Conformity Machine weight kg. 350
maximum number of results exceeded
please refine your search
350 € 
