saws used for sale

Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170

Circular saw Frommia 630 Length 1.20 m Width 1 m Height 1 m Attack Roller table Saw blade

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Key data: 800 mm

Under-table cross-cut saw / optimization cross-cut saw Paul Type 20 E / NC Control Maxi 0.3 Machine No. 9159582 Year of construction 10.7.92 NC control Maxi 0.3/X.3 for length and quantity input, Cutting width max. approx. 700 mm Cutting height max. approx. 150 mm Saw blade diameter 800 mm Saw motor 7.5 kW Feed motor 4 kW Hydraulic pump motor 2.2 kW Speed of the saw blade 1450 rpm. Infinitely adjustable feed of the saw blade up to 0.2 m/sec. Cutting time depending on cross-section (adjustable) 0.5 – 3 sec. Driven rollers 2 at the top and 2 at the bottom Roller diameter 106.1 mm top and bottom Adjustable roller pressure Transport speed infinitely variable from 0 – 2.3 m/sec. Shortest input length with manual feeding approx. 500 mm Shortest input length with automatic feeding approx. 1500 mm Length accuracy +- 2 mm Measurement via measuring roller in the table P ...

Dimensions (L/W/H): 2860x1120x1140 mm Weight: 1260 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Band saw JAESPA AS8 Blade length 5300 - 5500 mm Width 34 mm 16 A 380 V Length 1.50 m Width 1 m Height 2.50 m Tiltable table Speed indicator

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Dimensions (L/W/H): 3900x2230x3900 mm Weight: 1500 kg Total power requirement: 18 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2800x1140x1100 mm Weight: 1070 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT

SPECIFICATIONS: 2 saw blades Ø 250 mm (2.2 Kw each) 2 saw blades Ø 350 mm (2.2 Kw each) Speed: 3800 rpm Machinable length: min. 200 mm-max. 1200 mm With chip transport carpet

For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request

Code: 0301 Brand: PAOLONI Model: P45 - CEStandard Panel saw with tilting blade and scoring unit for panels, furniture, custom-made furnishings, doors, wooden window frames, composite materials, plastics, and various materials - CE Standard Technical data: Aluminum sliding carriage length 3200 mm Carriage lock in any position Cutting width on parallel guide 1250 mm Max blade diameter 450 mm Hole 30 Cutting height at 90° mm 157 Cutting height at 45° mm 111 Tilting blade unit 0-45° Saw shaft speed rpm 3000/3600/4200 Blade motor power 7,5 Hp Automatic saw unit lift Manual tilt with saw unit handwheel Scoring saw unit: Blade diameter mm 125 - Hole 30 - Scoring motor power Hp 1 - Horizontal and vertical scoring saw adjustment Parallelogram blade guard Eccentric clamping arm Saw blade tilt indicator Weight kg 820

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies

Width of the feed carpet 300 mm Max saw blade diameter 350 mm min. cutting length 390 mm variable cutting speed, feed carpet speed adjustable 6-48 m/min Power 25,5 kw 35 hp 35 HP

Code: 0325 Brand: STETON Model: REBECCA - CE Standard Panel saw with tilting blade and scoring unit for furniture, joinery, panels, wooden window frames, doors, plastics, composite materials and various - CE Standard - Year 2007 Technical data: Aluminium carriage length 1500 mm Useful squaring 1610 mm Blade tilt 90-45° Max blade diameter 350 mm Hole 30 Cutting height with blade at 90° - 115 mm Cutting height with blade at 45° - 95 mm Blade motor power 4 Hp Scoring unit blade diameter 100 mm Hole 20 Scoring unit motor power 0,75 Hp Parallelogram blade guard with protective cover Square width on table 1050 mm Suction port diameter mm 120 and 60 Overall dimensions for transport mm 1700 x 1700 x 1450 h Weight kg 600

- welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - Powerful, low-vibration motor Cutting length horizontal mm : 5.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 6.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 6300x2990 mm

Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning

Code: 0332 Brand: SALVADOR Model: SEL/600 - CE Standard Longitudinal panel saw for postformed strips and finished components with roller feed and unloader (SPLITTER) – CE Standard Technical data: Cutting width/REF mm 10–650 Cutting thickness mm 10-60 Crosscutting saw blade diameter mm 350 Scoring blade diameter mm 350 Crosscutting motor power Hp 5,5 Scoring motor power Hp 2 Carriage feed speed mt/min 15 Suction port diameter n° 2 mm 160 each Work surface height 900 mm Workpiece feed right/left The panel saw consists of a cutting unit composed by 2 aligned blades. One blade scores the material and the other performs the cut Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Roller diameter 80 mm Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Stop guides Compressed air 6-8 atm Weight kg 1900

Code: 0340 Brand: CIMAN - ITALY Model: MATA 450 - CE Standard Automatic single-head crosscutting machine with double-angle for aluminium, complete with roller conveyors on the right and left – CE Standard Technical data: Blade diameter 450 mm Hole 32 Motor 3 Hp – Rpm 2800 Cutting dimensions : at 90° mm 90 x 190 mm - at 45° mm 90 x 125 Profile clamping, blade lubrication and feed are pneumatic Double rotation of the heads +/- 22,5°-45°-90° achieved by means of a pneumatic cylinder The cutting feed is adjustable by means of oil brake Complete with base and 2 side tables 3 metres on the left and 4 metres on the right with adjustable stop It is also equipped with a special protractor for cutting at intermediate angles Suction inlet diameter 100 mm Compressed air 6–7 bar Overall dimensions: Machine mm 1200 x 1500 x 1500 h - Left roller conveyor mm 3000 x 200 - ...

Sliding table saw Altendorf TRK 45 Year of construction: 1986 S/N 86-9-209 checked in our workshop for normal operating condition Carriage length: 1350 mm Height and swivel adjustment manually with handwheel Motor power: 5.5kW Cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, Blade diameter max mm: 450 ( without scoring machine ) with scoring Automatic engine brake Weight approx. 1100 kg Technical specification subject to change + 2 additional saw blades

Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Main rotation speed 3900 rpm Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300  ...

Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)

Raimann KS 310 Technical Data – KS 310 Max. cutting width: 310 mm Max. passage width: 650 mm Max. cutting height for multi-blade equipment: without pressure screen: 120 mm with pressure screen: 105 mm Min. cutting height: 10 mm Min. workpiece length: Standard version with pressure screen: 450 mm Machine data Chain width: 340 mm Saw shaft diameter: 65 mm Diameter of socket: 80 mm Max. saw blade diameter: 360 mm Min. saw blade diameter: 250 mm Saw blade bore (DKN 18×3.5 mm): 80 mm Saw shaft speed: 3900 rpm Feed speed, infinitely variable: 4–45 m/min Working height (from floor to top of the chain): 850 mm Weight approx.: 2200 kg Dimensions of the machine: see installation plan Suction data Chip extraction (printing unit) – extraction connection dimensions: Diameter: 250 mm Air speed: 30 m/s Air volume: 530 ...

Multi-blade saw Paul type K 34 G 2200 Specifications: • Working width (mm): 2200 • Engine power (kW): 22 • Top rollers: with PU rings • Bottom rollers: corded • Saw shaft: included

Besaummer Wurster Dietz FR7 Schmithohe 160mm rollengang steigforder kapsaege

Machine No.: 92380 Weight: 210kg Year of construction: 04/2011

Key data: 500 mm, 125 mm

Safe-Solid-Fast The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2 hand control - Protective shield rigid - 1 meter roller conveyor to the right of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler. - 1 meter roller conveyor to the left of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler with scale. - 1 piece of pneumatically swivelling stop with 200 mm Length and control switch on the saw frame - 1 piece HM saw blade 500 mm, Z = 108 Technical data: Maximum Cutting Range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW  ...

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Special price: Options: Scoring unit with motor 0.75 kW WJ-800105 Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Saw motor 400 V / three-phase / 4.0 kW WJ-800109 Eccentric clamp WJ-500103 Format table L= 2743 mm WJ-800102

Part number 7960 SPECIFICATIONS - max cutting height 140mm - max element width 700mm - working width of the shaft with saws 580mm - shaft diameter 70mm - max saw diameter 400mm -in advance: - Ratchets/Fluffers - 2 pulling shafts, geared - Metal Slip Roller -from the bottom: - Sliding roller - latches - smooth pulling shaft - shaft with saws - pulling shaft, smooth - metal sliding roller - infinitely variable feed speed control on the inverter - 3kW feed motor - main motor 22kW - overall dimensions length/width/height 1600x1300x1900mm - weight about 2000kg Net price: 46900 PLN Net price: 11167 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Options at extra cost: Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Eccentric clamp WJ-500103 Scoring unit with motor 0.75 kW

Part number 7961 SPECIFICATIONS - track width 250mm - shaft width 250mm - max blade diameter 350mm - blade bore diameter 70mm - max cutting height 100mm - Table top width with a clearance of 940mm - table top length 1700mm -in advance: - Ratchets/Fluffers - pressure roller, metal, smooth - shaft with saws - pressure roller, metal, smooth 2pcs -from the bottom: - Guide - Ratchets/Fluffers - Slip roller, smooth - Caterpillar - central lubrication - 4kW feed motor - main motor 37kW - infinitely variable feed speed regulation - manual body lifting - manual lifting of the shaft with saws - Diameter of the extraction port 200mm - overall dimensions of the machine 1800x1500x1700mm - weight 1956kg ADVANTAGES – German production – smooth feed speed regulation – used multi-saw, very good condition Net price: 22900 PLN Net price: 5452 EUR depending o ...

Part number 7959 SPECIFICATIONS - track width 250mm - shaft width 250mm - max blade diameter for a multi-saw 350mm - blade bore diameter 70mm - max cutting height for a multi-saw 120mm - Table top width with ground clearance 830mm - table top length 1780mm – in advance: - Flingers - roller, compression sliding, metal, smooth - Flingers - pressure roller, sliding - shaft with saws - pressure roller, slipper, metal 2pcs – from below: - guide strip - Flingers - Caterpillar - Electric up/down adjustment of the body - manual adjustment of the shaft with saws - central lubrication - infinitely variable feed speed regulation - 1.1kW feed motor - main motor 37kW - Diameter of the extraction port 170mm - overall dimensions l/w/h 2000x1500x2000mm - weight 1850kg ADVANTAGES – German production – used multi-saw, very good condition Net price: 45900 PL ...

Weibert BS-500 Wood band saw Cutting height 450mm Swivel -15° + 45° Motor power: 5KW, 400V, 50HZ Band length 4670mm Suction nozzle 2 x 100mm Saw blade width 6 to 40mm Cutting width left 490mm CE marking WJ-X00200

SPECIFICATIONS: Workbench for reading and cutting glazing beads Workbench dimensions: 3000 x 1250 mm Tilt of saw blades: 45° Pneumatic/electric operation

PART NUMBER 7948 Specifications: - track width 400mm - shaft working width 400mm - max disc diameter (350mm fitted) 450mm - blade bore diameter 70mm - max cutting height (with a blade of 450mm) 160mm - Table top width with widening 710mm - table top length 1900mm -in advance: - 2-row ratchets/flasks - Slip roller, metal, pressure roller - Ratchets/Fluffers - Slip roller, metal, pressure roller - shaft with saws - Smooth, metal, sliding roller -from the bottom: - guide strip - latches - Caterpillar - Electric body lift - central track lubrication - 2 types of feed speed + smooth - total power 32kW - overall dimensions l/w/h 2050x1800x1530mm - weight about 2000kg ADVANTAGES: – Italian production – very good condition – DTR documentation – used multi-saw Net price: 48900 PLN Net price: 11643 EUR depending on the price 4.20 EUR (Prices may c ...

Type: Special 410 CSO Machine No.: 97213 Year of construction: 2012 Weight: 530 kg Dimensions LxWxH: 700x1400x1550 mm Band dimensions: 3010x27x0.9 mm Motor power: 0.9 – 1.6 kW Engine revolutions: 700 – 1420 rpm Cutting speed: 38-77 m/min Cutting capacity: see picture Cutting thickness: 1.2 mm Height of clamping jaws: 150 mm Length of jaws: 210 mm Height of the worktop: 950 mm Clamping force: 400 kg Accessories 3x Band saw blades: 3010 x 27 x 0.9 mm (Z 6/10)

PART NUMBER 7946 Specifications: - track width 300mm - shaft working width 300mm - max blade diameter 350mm - blade bore diameter 70mm - max cutting height 120mm - table top width with widening 1030mm - table top length 1840mm – in advance: - Flingers (barrier to prevent material from backing up) 2 rows - Slip roller, metal, pressure roller - Flingers - Slip roller, metal, pressure roller - shaft with saws - 2 smooth metal sliding rollers – from below: - guide strip - Flingers - Caterpillar - laser - central track lubrication - infinitely variable feed speed regulation - 1.1kW feed motor - main motor 18.5kW - Diameter of the extraction port 200mm - overall dimensions l/w/h 1900x1800x1600mm - weight 1770kg Advantages: – Italian production – with laser – unpainted – very good condition – used multi-saw Net price: 55900 PLN Net price:  ...

Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

PART NUMBER 7751 SPECIFICATIONS - track width 250mm - shaft working width 250mm - max blade diameter 300mm - blade hole diameter 60mm - max cutting height 100mm - Table top width with widening 520mm - table top length 1580mm in advance: - 2 rows pawls - Slip roller, metal, pressure roller - shaft with saws - Smooth, metal, sliding roller from below: - Sliding roller - guide strip - latches - Caterpillar - central track lubrication - infinitely variable feed speed regulation - feed motor 0.75kW - main motor 15kW - Diameter of the extraction port 200mm - overall dimensions l/w/h 1640x1400x1550mm - weight 1000kg ADVANTAGES – Italian production – very good condition – used multi-saw Net price: 32900 PLN Net price: 7834 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 105 mm -Max. trolley speed 30 m/min -pusher with 6 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

NR KATALOGOWY 7958 DANE TECHNICZNE - max wysokość cięcia 120mm - szerokość wału 510mm - średnica wału 75mm - max średnica piły 400mm – z góry: - zapadki/odrzutniki 2 rzędy - wał ciągnący, zębaty - wał ciągnący zębaty, wyprowadzający – z dołu: - zapadki/odrzutniki - 2 wały ciągnące, zębate - wał z piłam - wał ciągnący zębaty, wyprowadzający - 6 rodzajów prędkości posuwu - silnik od hydrauliki (rozsów, posuw, wałki) 3kW - silnik główny 22kW - płynna regulacja prędkości posuwu - wymiar stojaka pulpitu 700x600x1000mm - wymiary całkowite dł/szer/wys 2300x1450x1600mm - waga około 2650kg ATUTY – produkcji tureckiej – solidna konstrukcja – maszyna używana, stan bardzo dobry Cena netto: 37900 PLN Cena netto: 9024 EUR w zależności od ceny 4,20 EUR (Ceny mogą się zmieniać wraz z wyższymi wahaniami)

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

PART NUMBER 7949 Specifications: - track width 380mm - shaft width 420mm - max blade diameter 400mm - blade hole diameter 80mm - max cutting height 120mm - Table top width with ground clearance 1060mm - table top length 2050mm – in advance: - row of latches / flellers - metal pressure roller - Flingers - 2 metal rollers, sliding - pressure - shaft with saws - 3 Slip Rollers, Pressure Rollers, Metal -from the bottom: - Guide - Flingers - Caterpillar - infinitely variable feed speed regulation - 1.5kW feed motor - main motor 30kW - central track lubrication - Diameter of the extraction port 250mm - Roller tables / tops 2pcs - I table top length 3500/800mm - II table top length 2550/800mm - roll width 700mm - table top height 950mm - overall dimensions length/width/height 2950x2000x200mm - weight about 3000kg Advantages: – German production – 2 ...

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding

SPECIFICATIONS: Max. cutting length: 3000 mm Max. cutting height: 50-60 mm Manual Saw Blade Feed Adjustable cutting width Electric/pneumatic operation

NUMER KATALOGOWY 7904 Dane techniczne: - max wysokość cięcia 160mm - max szerokość elementu 700mm - szerokość robocza wału z piłami 600mm - średnica wału 70mm - max średnica piły 450mm - z góry: - zapadki - 2 wały ciągnące, zębate - docisk z rolka metalową poślizgową - z dołu: - rolka poślizgowa - zapadki - wał ciągnący zębaty - wał z piłami - wał ciągnący, gładki - rolka poślizgowa metalowa - płynna regulacja prędkości posuwu - silnik posuwu 1,5kW - silnik główny 55kW - wymiary całkowite dł/szer/wys 1700x1400x1900mm - waga około 2740kg ATUTY – produkcji polskiej – solidna konstrukcja – maszyna używana, stan bardzo dobry Cena netto: 56900 PLN Cena netto: 13548 EUR w zależności od ceny 4,20 EUR (Ceny mogą się zmieniać wraz z wyższymi wahaniami)

• Manual operation • Good properties for profile cuts • Adjustment of the cutting angle via backlash-free tapered bearings • Quick clamping device • Precise belt guide, with ball bearings and carbide inserts • Electric coolant pump Specifications • Stop: 2000 mm • Power: 400V 2.7 A • Engine: 0.8 – 1.5 HP • Cutting speed: 40 – 80 m/min. • Vise opening: 315 mm • Jaw height: 110 mm • Jaw length: 180 mm • Working height: 1080 mm • Mitre cut: 60° right • Dimensions (LxWxH): 870 x 1250 x 1900 mm • Weight: 270 kg