saws used for sale

OMGA T55 300: 3 pcs. for sale Manufacturer: OMGA Type: T55 300 Year: 1990-10 M. Nr.: 199899 Max. saw height: 75mm Max. saw length: 135mm Saw diameter: ø300mm Diameter zaagblad as: ø30mm Motor: 1,2 kW Speed: 3000 tpm Dust extraction: 80 Condition: Functionel tested

HHARWI 1550 Giraffe vertical panel saw Manufacturer: Harwi Type: Giraffe 1550D Year: 1995 M-Nr: 5000 CK Max. Cutting Heigt: 1.550 mm Max. saw width: 3.200 mm Max. Dept/- panelwidth: 50 mm Saw blade diameter: 250 mm Saw Blade Arbor: 30 mm Motor: 2.2 kW, 400 V, 4.3 Amp Saw RPM: 2.800 tpm. Product support bottom: Blocks Sawwall: Closed wall Product support small work pieces: Yes Measurement system: vertically and horizontally analog Turning sawhead: Manual Sawing motion: Manual Machine frame : stand-alone A-frame Dust extraction: direct hood suction Saw truck fixation: Manual Suction connections: 80 mm Dimensions: 4.300 x 1.850 x 1.250 m Weight: 495 KG Condition: Fully functional tested.

Agazzanio N’RA700 Bandsaw Manufacturer: Agazzani Motor: 2,2kW Table size: 740640mm Wheel: 700mm saw height: 405 mm Max saw widt: 680mm Saw band length: 5020/51400mm Band width: max. 40mm Tilting/blade: 45° Working height: 960 Dust extraction: ø120 mm Machine dimensions: 13506702170 Average sound level: 82,3 dB(A)

Striebig Automatic 6220AV vertical panelsaw Manufacturer: Striebig Type: Standaart II 6220A Year: 1985 M-Nr.: 14118 Max. Cutting Heigt: 2.100 mm Max. saw width: 5.300 mm Max. Dept/- panelwidth: 80 mm Saw blade diameter: 300 mm Saw Blade Arbor: 30 mm Motor: 4.4/5.5 KW Saw RPM: 4.750 rpm Product support bottom: Rolls Product support small work pieces: Yes Measurement system: analoog Turning sawhead: Manual Sawing motion: Manual Machine frame : vrijstaand met staanders a/d/ achterzijde Dust extraction: ø100 mm Saw truck fixation: Manual Dimensions: 6.5 x 2.5 x 1.3 m Condition: Fully functional tested.

Altendorf F45 ELMO III Panel saw Manufacturer: Altendorf Type: F45 ELMO III Year: 1996 Mach.Nr.: 96-02-044 Technische gegevens: Control: LCD screen, eye level, swing away saw width, saw height, saw tilting, Sliding Table: 3200 mm (Double trolley on hard-chrome rail, smooth upper carriage lock) Cutting Width: 1300 mm Main saw: ø250 – 450 mm, 5.5 KW, 3.000-6.000 rpm NC-electromotive height and swivel adjustment 0-46 °: h Scoring saw: Non Sidetable: extendable 700 mm Length stopper: 0-3.500 mm, with fixed 90 ° position, 2 stoppers Condition: well-maintained machine, functional and technically checked. Avaialable: immediate

DeWalt 722KN -XS Manufacturer: DeWalt Type: 722KN-XS M.Nr: 00180 Cutting height: 90mm Stroke: 510mm Saw diameter: ø300mm Arbor: Ø 30mm Motor: 3 KW RPM: 2650 rpm Dust extraction: 2x 100mm Weight: 115 kG

Griggio Unica 400 sliding table saw Manufacturer: Griggio Type: Unica 400 Year: 2010 M-Nr.: MC00101468 Main saw: ø400 mm, saw height: 125 mm, tilting: 0-45° Saw height setting, tlting: electric with digital counter Rotation speed: Cutting Heigt: 0-125 mm electric with digital reading Saw tilting: 0 – 45° electric with digital reading Motor: 7.5 KW Scoring saw: 0.75 KW, ø125 Sliding Table: 3.200 mm Cutting Width: 1.250 mm electric with digital reading on the fence Cross cut fence: 2.200 – 3.300 mm Side table: steel with angle prefix, productsupport and easy loading roll Dust extraction: Top: ø80 mm, bottom: ø120 mm Weight: 820 KG Condition: Full Functionaly

HARWI 1850 Giraffe vertical panel saw Manufacturer: Harwi Type: Giraffe 1850 M-Nr.: 5008KM Year: 2003 Max. Cutting Heigt: 1.850 mm Max. saw width: 4.300 mm Max. Dept/- panelwidth: 55 mm Saw blade diameter: 250 mm Saw Blade Arbor: 30 mm Motor: 3.0 kW, 400 V, 4.3 Amp Saw RPM: 2.800 tpm. Product support bottom: Blocks Sawwall: Closed rear support wall Product support small work pieces: Yes Measurement system: vertically and horizontally analog Turning sawhead: Manual Sawing motion: Manual Machine frame : stand-alone A-frame Dust extraction: direct hood suction Saw truck fixation: Manual Suction connections: 80 mm Dimensions: 5.200 x 1.300 x 2.700 mm Weight: 570 KG Condition: Fully functional tested.

Harwi 130 Type: 130 M-Nr.: 4000JG Year: 1995 Cutting height (Max): 25 – 135 mm Cutting height 45° ( (ø450 mm): 98 mm Saw diameter (max): ø450 mm Saw blade inner-ø: ø30 mm Saw width (max): 0-650mm Saw blade tilting: 0-45° Motor: 5,5 kW RPM-Motor: 2800 rpm RPM-Saw blade: 2801 rpm Dust extraction points: 1 x 100, 1x120mm Weight: 320 KG

Key data: 400 mm

Cold circular saw Make: Kaltenbach Type: KKS EG-H/M45NC Built in 1995 Semi-automatic cold circular saw Vertical saw with cut from below and rotating saw table -Saw blade Ø 400 mm -Hydraulically adjustable saw blade feed -Coolant pump for coolant flow -Pin and chip scraper -Adjustable workpiece stop for using the full working width -Rotary table for oblique and longitudinal cuts, rotation range 90° to each side Max. sawing capacity: Fl. 300x40 mm, or 120x120 mm Height: 1860 mm Width: 1070 mm Depth: 800 mm Weight: approx. 900 kg with infeed roller conveyor 6 m and with discharge roller conveyor 3 m with controlled measuring carriage (M45NC) programmable, automatic operation little used Technically good condition Visually good condition Machine is still in commercial use and can be viewed by appointment. Transport from the hall an ...

Vertical Saw Viktor DCM4 BJ 1986

Basic equipment of the series: - Rear machine table with collets and roller rails - Program slider for material positioning via collets - Machine table on saw body with recesses for the collets - Pressure beams for material fixation during cutting - Robust saw carriage, with main and scoring saw, as well as angle pressure device - Integrated drilling and milling unit for undercut drilling - Cadmatic4 control with PowerTouch user interface Technical data: Cutting length 4300 mm Cutting width (program slide travel) 5800 mm Roller rail (element 8-lane) 2 pieces Roller rail (element 2-lane) 4 pieces Collets 7 pieces Pitch 75/275/475/1075/1425/1825/3425 mm measured from the angle ruler to the middle of the collet Air cushion table with frontal roller element 2160 x 800 mm 2 pieces (as item 1 extended one after the other on a stop ruler) Air cushion table with frontal roll ...

Sawblade tiltable: 45 ° Length of the rolling table: 3.200 mm cutting width: 1.250 mm Motor output: 7,5 kW Cutting height: ca. 204 mm Saw blade diameter: 550 mm Speed: 3000 / 4000 /5000 U/min. weight of the machine ca.: 1.200 kg : Nein : Elektrisch : Elektrisch : Ja : Digital The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Additional technical specifications: • Material feed support length: approx. 1900 mm • Material discharge support length: approx. 5000 mm • Hydraulic clamping: available • for miter cuts

Drehzahl: bis 3000 U/min, max. Sägeblattdurchmesser: 315 mm, Betriebsspannung: 380 V, Frequenz: 50 Hz, Anschluss: 2600 W, Nennstrom: 5,5 A, Tischabmessungen: 1100 x 660 mm

• Incl. left roller conveyor • Roller conveyor width: 240 mm

Additional technical specifications: • Digital display: available • Roller conveyor: available • Roller conveyor length: approx. 3000 mm

Additional technical specifications: • Support surfaces right and left: 4000 mm each • operating voltage. 3 x 400 V

Incl. sliding table, incl. extraction system from manufacturer SCHEPPACH. Attention: the machine can be transported on a standard truck! Additional technical specifications: • Incl. sliding table • Slide length: approx. 3100 mm • incl. extraction system from manufacturer SCHEPPACH

• Incl. roller conveyor on the left • Roller conveyor width: 400 mm

cutting diameter: 400 mm capacity 90 degrees: flat: 500 x 400 mm saw band length: 6220 x 41 x 1.3 mm speed: 15.0 - 150 m/min work height max.: 750 mm workpiece weight: ca. 250 - 300 kg/m Control: MEBA NC coolant tank capacity: 80.0 ltr. oil volume: 30.0 ltr. power capacity: 5.5 kW weight of the machine ca.: ca. 2250 kg range L-W-H: 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic two-column linear guide system Fully automatic machine for 90° cuts only - User-friendly NC dialog control With plain-text display 5.7-inch CE panel Program memory with 50 programs, each with 20 steps - Automatic material feed Minimum cutting diameter .. Ø 5.0 mm Residual piece length without bundle clamping .. manual 25.0 mm Residual piece length without bundle clamping .. automatic 110 mm Automatic movement of the ...

: gebraucht : 2023 : 6246 : prompt, Zwischenverkauf v : Italien : 2970 € : 1 : 300 mm : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 500 mm : 1050 mm : 990 mm : 135 kg demo machine / mint condition net price vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via ...

TECHNICAL DATA: Belt width: 250 mm Axle: Ø 60 mm Saw blade: Ø 250 mm Processing height: max. 100 mm Feed with 2 speeds (0.6 kW) Installed power: 15 kW EQUIPMENT: Miscellaneous accessories

cutting diameter: 360 mm saw band length: 4870 x 41 x 1,3 mm cutting width: 360 mm cutting speed: 11 - 110 m/min : 4,0 kW height of the workpiece: 800 mm weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,3 x 1,9 x 2,2 m Automatic hydraulic band saw with - SIMATIC OP17 NC control - Single material feed 600 mm - Max. programmable length 6000 mm - Hydraulic saw blade tensioning (36–40 bar) - Motorized chip conveyor - Emergency stop device - infeed roller conveyor 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eima Sliding Table Saw Type 122 Cutting width min/max 210-2565 mm Cutting depth of cutting 2500 mm Maximum blade diameter 400 mm Cutting height ~100mm Tilting cutting unit 90° – 45° 2×4.4kw motor Total power requirement 10kw Electronic Cutting Width Eats Technical documentation and CE certificate Net price