saws used for sale

Technical data: Manufacturer: FomIndustrie Type: MIRAGE 600 Year of Make: 2019 Control: POWER R (electric) Possibility of using a saw blade Saw blade ⌀: 355 mm (iron) TCT saw blade ⌀: 400, 500 or 600 mm (aluminium/light alloy) Performance Minimum speed: 1,250 rpm Maximum speed: 1,800 rpm Fixed cut: 90° Three-phase motor M112: 7.5 kW Average operating pressure: 550 NL/cycle Operating pressure: 7 bar Working Range/Load Width of work surface left: 200 mm Width of work surface right: 150 mm Smallest bar passage: 105 mm max. load: approx. 500 kg Dimensions and weight Dimensions L/W/H: 3,000 mm, 1,950 mm, 2,050 mm Weight: 850 kg Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Roller conveyor Pre-installation for chip and smoke removal Front hood with manual opening Integral protective h ...

Number of motors: 1 Stück 0: , mm Control: , 0 cutting width: 115 und 82 mm Cutting height: 55 mm Motor output: 2.0 kW machine weight ab.: 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----------------------------------------------- Brief manufacturers description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----------------------------------------------- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Ma ...

Automatic seaming system Approx. 5.30m cutting length Laser Measurement With or without separation Built in 2005 from small sawmill

Lg.Nr. 26301 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° to around 130 mm - Square 120 mm -flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° to around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade - Infinitely adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - hydr. Material vise with hand crank for fine adjustment - Infinitely adjustable clamping pressure - 2 pieces of hydraulic retainers - Micro spray coolant device - Original discharge - roller conveyor with dimension stop 4000 mm - Roller conveyor feeder 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 250 mm capacity 90 degrees: square: 250 x 250 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 260 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm band speed: 15 - 100 m/min dimensions of saw-band: 3650 x 27 x 0.9 mm Control: MEP CNC total power requirement: 2.2 kW weight: 1190 kg Fully automatic electro-hydraulic band saw, featuring additional operating modes: semi-automatic semi-automatic dynamic manual Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) MEP Direct control technology User interface with intuitive 10 touchscreen display Mechanical buttons for saw operating functions Guarantees reliable, simple, and intuitive operation Real-time monitoring of all cutting parameters Pivoting arm allows for convenient and safe operation Di ...

Band saw Bauer S 380 BJ 1993

Bandsaw Behringer HBF 360A BJ 1997

Band Saw Behringer HBF 430A BJ 2000

Martin T72A sliding table saw Hydraulic saw tilting with digital display at eye-level Hydraulic saw elevation with digital display at eye-level NC-controlled parallel fence Cross-cut fence with 2-point stops Scoring saw Manufacturer: MARTIN Type: T72A Comfort M-Nr.: V403081 Year: 1999 Control panel: Eye-level integrated in dust extraction cover, LCD displays showing saw height, -saw tilting angle, width/parallel fence positioning; scoring saw positioning Saw blade elevation: Hydraulic footpedal elevation 0 – 170 mm – with LCD display Saw blade tilting: Hydraulic footpedal tilting 0 – 46° – with LCD display Parallel fence Positioning: Handwheel positioning (frontsidemachine) – digital reading on central control Dust cover top: Electrically controlled elevation Manual sideward positioning for large objects sawing Cross-cut table: Aluminium swivelling table suitable for mitre cut ...

Martin T71 sliding table saw Manufacturer: Martin Type: T71 M-Nr.: 1982 Year: V123342 Mainsaw: max. ø450 mm, max Sawheight: 170 mm, Saw tilting: 0° – 46° Scorer: No RPM: 2.800/4.000/5.500 tpm Motor: 5,5 KW Sliding table: 1.900 mm Width: 1.250 mm Cross cutfence: Length measuring fence 2.200 – 3.300 mm with 2 -point system Cross cut table: with fixed positions for most used angles Dustextraction: Top: ø80 mm, Bottom: ø140 mm Weight: 1.200 KG

Martin T17 with tilting saw Manufacturer: Martin Type: T17 M-Nr.: V070521 Table Size: 1030 x 1050 mm. Table Heigt: 800mm Sliding Table: Yes Main saw: kW Speed: 2800 – 4000 – 5500 tpm Saw Blade Arbor: ø30 mm Saw Blades: ø450 Cutting Heigt: 147mm Blade Width: 0 – 45° Cutting Width: 1.050 mm Condition: Volledig functioneel

Omga Radial 600P3S Manufacturer: OMGA Type: Radial 600P3S M.Nr: 163864 Max. saw height: 90mm Max. saw length: 505mm Saw diameter: ø300mm Saw spindle: Ø 30mm Motor: 3 kW Speed: 3000 tpm Dust extraction: 80mm Weight: 190 kG Condition: functional

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222415 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222420 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested

Rema DMMC sliding table saw Manufacturer: Rema Type: DMMC40 Year M. Nr: 1995 Main saw: max. max. ø400 mm, max Sawheight: 130 mm, Saw tilting: 0° – 45° Scorer: Yes RPM: 2.800/4.000/5.500 RPM Motor: 5,5 KW Sliding Table: 3.000 mm Parallel fence Positioning: 1.250 mm Cross cut fence: 2.200-3.300 mm 2-point fence Sidetable: with fixed positions for most used angles Dust extraction: Top: ø80 mm, Bottom: ø140 mm Weight: 900 KG

Martin T72A sliding table saw with electric saw elevation, -tilting, NC-controlled parallel fence, cross-cut fence with 2-point stops and mitre cross cut table Manufacturer: MARTIN Type: T72A M-Nr.: V238101 Year: 1997 Control panel: Eye-level integrated in dust extraction cover, electric saw elevation, -saw tilting, NC-controlled parallel fence positioning; Saw blade elevation: Electric controlled – digital reading on central control Saw blade tilting: Electric controlled – digital reading on central control Parallel fence Positioning: NC-controlled with digital reading on central display Sidetable: Mitre cross cut table, Cross cut fence: Aluminium: 2.200 mm, extendable upto 3.300 mm, with Digital 2-point stops Main saw: max. ø450 mm, bookthickness; 0-170 mm, tilting 0° – 46° RPM: 2.800/4.000/5.500 RPM Motor: 5,5 KW Sliding Table: 3.300 mm Parallel fence Positioning: 1.250 mm Du ...

Altendorf TKR45 Manufacturer: Altendorf Type: TKR45 Mach. Nr: 89-1-221 Year: 1989 saw length: 1350mm Sidetable: JA Saw width: 850mm saw height: 155mm Saw diameter (max): ø450 Saw spindle: ø30 Saw blade tilting: 0-45° Motor: 5,5 kW Speed: 3000/4000/5000 omw/m Weight: 910KG

Manufacturer: Harwi Type: 625-U Year: 1998 Swivelling: 0-45° Tilting: 0-45° Cutting heigth: 135mm Cutting length: 625mm High adjustment: 50mm Saw: Ø 400mm Saw arbor: Ø 30mm Motor: 3 kW Toerental: 2800 tpm Dust extraction: 2x 100mm

SCM SI400 Vanguard sliding table saw, 3-ax Control, Swivelling cross-cut table Manufacturer: SCM Type: SI400 Vanguard M-Nr.: Year: 2004 Touchscreen: 12″full-colour touchscreen, start-stop function in sliding table Control: 3-ax control, with control panel at eye -level 999 programm positions, 6 cuts per programm, help function with graphics, collision control Sliding Table: 3.200mm Saw Blades: Ø 250 – 400 mm Main saw: 5,5 kW, 3.000-4.000-5.000 rpm Cutting Heigt: 130 mm (saw diam.. 400 mm-90°, 92 mm- 45°.) Tilting: 0 – 45° Scorer: ø120 mm, 2-ax control Motor: 0.75 KW, 8.500 rpm Cutting Width: 1.500 mm Rip fence: anodised aluminium Cross-cut table: Vanguard cross-cut table with swiveling -50° upto 50° Cross-cut fence: Aluminium 2 digital stops with angular length correction, max 3.2 m

SCM SI15 with tilting saw Manufacturer: SCM Type: SI15F Year: M-Nr.: AB20182 Table Size: 1150 x 800 mm. Table Heigt: 800mm Sliding Table: Ja Main saw: 5,5 kW RPM: 3200 – 4500 – 6000 tpm Saw Blade Arbor: ø30 mm Saw Blades: ø350 Cutting Heigt: 115mm Blade tilting: 0 – 45° Cutting width: 850 mm Weight: 560KG

Graule ZS170N 3D – with NC controlled tilting & swivelling Manufacturer: Graule – with Tigerstop NC-control Type: ZS170N – with Tigerdrive control (tilting & swivelling) M-Nr.: 2014/78/27 Year: 2014 Graule ZS170N Motor: 3 kW Saw: ø420 mm As zaagblad: ø40 mm Cutting height: 170mm Swivelling: 45° – 90° – 25° Tilting: 0° – 45° Stroke: 450 mm – 90° 310 mm – 45 ° Saw: ø420 40 48 WZ Neg. (used) Machine stand: Inclusive

DeWalt 1600S Manufacturer: Dewalt Type: 1600S M. Nr: nn Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

Maggi 640 Junior Manufacturer: Maggi Type: 640 Year: 1994 Thickness: 125mm Stroke/sawlength: 450mm arial: 90mm Saw blade-outside diameter: ø400mm Saw blade-inner diameter: ø30mm Motor: 3 kW RPM: 2800 tpm Dust extraction: 2x 100mm

AC 700 Manufacturer: AC Type: 700 Motor: 4 kW Table dimensions: 740640mm Wheel: 700mm Saw height: 405 mm Max saw widt: 680mm Saw band length: 5.020 / 5.140 mm Band width: max. 40mm Tilting/blade: 45° Working height: 960 Dust extraction: ø120 mm Machine dimensions: 1.3506702170 Noise: 82,3 dB(A)

Striebig vertical panelsaw Compact 5207 C – 2005 Manufacturer: Striebig Type: 5207 Compact TRK M-Nr.: 30215 Year: 2005 Motor: 3.0 kW – 3 400V 50Hz Diameter: 250mm (ID 30 mm) Bore: 30 mm RPM: 5.250 rpm Dimensions: Max. saw length: 4.600 mm Max. saw width: 2.070 mm Max. saw depth: 1.958 mm Saw dept: 60 mm Machine length: 5.826 mm m Machine height: 2.838 mm Machine dept: 1.428 mm Product support bottom: Rolls Product support small work pieces: Yes Length measuring system: analog Saw turning: manuel Saw movement: manuel Machine support: Self-supporting A-frame Dust extraction: ø100 mm Saw position fixation: manual Equipped with: Emergency stop Motor brake

DeWalt 1600 Manufacturer: Dewalt Type: 1600 Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

Striebig Automat 6220AV verticale platenzaag Merk: Striebig Type: Automat 6220AV Bouwjaar: 1991 M-Nr.: 20851 Max. Zaaghoogte: 2.100 mm Max. Zaaglengte: 5.300 mm Max. Zaagdiepte: 80 mm Zaagblad diameter: 300 mm Zaagas: 30 mm Motor: 4.4/5.5 KW Zaag toerental: 4.750 tpm. Rollen support: Rollen Stroken opleg: Ja Meet systeem: analoog Zaagkop draaien: manueel Zaagbeweging: manueel Machine frame : wandzaag Afzuiging: ø100 mm Zaagwagen fixatie: manueel Afmetingen: 6.5 x 2.5 x 1.3 m Conditie: functioneel gecontroleerd

MARTIN T74 Radio Control – sliding table saw, with 4-ax CNC control; parallelogramtable as 5. ax integrated in central control, plus 3-ax Scoring Saw Manufacturer: MARTIN Type: T74 AUTOMATIC – Radio Control Year: 2008 M-Nr.: V484794 YouTube:

Martin T17 with tilting saw Manufacturer: Martin Type: T17 Year: 1972 M-Nr.: V95358 Table Size: 1030 x 1050 mm. Table Heigt: 800mm Sliding Table: Ja Main saw: 4 kW RPM: 2800 – 4000 – 5500 tpm Saw Blade Arbor: ø30 mm. Saw Blades: ø450 mm Cutting Heigt: 147mm Blade tilting: 0 – 45° Cutting width: 1.050 mm

Martin T60C-automatic panel saw Manufacturer: Martin Type: T60 Classic M-Nr.: V482223 Year: 2008 Martin T60C V482223:

Centauro CL900 Manufacturer: Centauro M-Nr.: 2064 Year: 1996 Motor: 5.5 KW with electro-pneumatic brake Table dimensions: 1.100800 mm Wheel: 900mm Saw height: 550 mm Max saw widt: 850mm Saw band length: 6.190 – 6.380 mm Saw band width: 30 – 50mm Tilting/blade: 45° Working height: 960 mm Dust extraction: ø120 mm Weight: 925 KG Noise: 82,3 dB(A)

Striebig vertical panelsaw Compact 5220 Manufacturer: Striebig Type: 5220 Compact fitted with TRK dust extraction M-Nr.: 41596 Year: 2010 Motor: 3.0 kW – 3 400V 50Hz Diameter: 250mm (ID 30 mm) Bore: 30 mm RPM: 5.250 rpm Dimensions: Max. saw length: 4.600 mm Max. saw width: 2.200 mm Max. saw depth: 2.100 mm Saw dept: 60 mm Machine length: 5.826 mm m Machine height: 2.980 mm Machine dept: 1.466 mm Product support bottom: Rolls Product support small work pieces: Yes Length measuring system: analog Saw turning: manuel Saw movement: manuel Machine support: Self-supporting A-frame Dust extraction: ø100 mm Saw position fixation: manual Equipped with: Emergency stop Motor brake

AVOLA Gamma 60R Manufacturer: Avola Type: Gamma 60R Year: 2001 M-Nr.: 35001 Table dimensions: 1.5001.500900 mm Swivelling:Tilting: 0 tot 180° with digital reading Neigen: 0-45° electric tilting with digital counter Max. Saw heigth: 220 mm-90°; 160 mm/45°; 110 mm/30° Max. Cutting length: mm Rolltables: 400 mm sideward movement, resulting in 400 mm increased cutting length Saw: Ø 500/600mm, 3.000 rpm Saw spindle: Ø 30mm Motor: 8,8 kW – Direct-drive, 400V, 50 Hz, Nom. 18A RPM: 3.000 rpm Duo-feeders: Left- and Right hand side, top driven rolls Length measuring: Left & Right length measuring wheels positioned straight under the Duo-Drive feeders, with unlimited length measuring Length stoppers: Manual stoppers Left 4 meter and right 1.5 meters, or opposit. Dust extraction: ø150 mm at 20,5 m/s,

MARTIN T74 Radio Control – sliding table saw, with 4-ax CNC control and 5. ax integrated and 3-ax Scoring Saw Aggregate Manufacturer: MARTIN Type: T74 AUTOMATIC met 3–as voorrits en parallelogram tafel Year: 2007 M-Nr.: V471539 YouTube: Touchscreen: 10.4″ touchsreen full colour, ate eye level, swivelling Table Size: 1.350 x 1.500 mm in grey cast iron; table extension 600400 with storage Table Heigt: 900mm Sliding Table: 3.300mm Main saw: 5.5 kW Saw Blade Arbor: Main saw blade arbor: 30 mm Ø; two 10 mm drive pins Saw Blade replace: ProLock” quick change system Saw Blades: Ø 250 – 500 mm; saw blades up to Ø 400 mm can be lowered below table; saw blades up to Ø 400 mm can be used with scoring blades Cutting Heigt: CNC-controlled max. 170 mm when Ø500 mm Blade tilting: CNC-controlled 0 – 46° Cutting Width: CNC-controlled, max. 1.350 mm; can be lowered under table level in i ...

Martin T75PreX (246° tilting) and RadioCompens (length compensation for angular cuts) Manufacturer: Martin Type: T75PreX Year: 2012 M-Nr.: V519664 Control: 10.4″ Touch-Screen at eye-level, turning-swivelling with blocknote holder 3-ax CNC-controlled plus 4th and 5th manual axes integrated in centra control system Table Size: 1.350 x 1.500 mm in grey cast iron; table extension as standard, Table Heigt: 900mm Sliding Table: 3.700mm Main saw: 9.5 kW frequency controlled Saw Blade Arbor: Ø30 mm main saw blade arbor, 2 pcs 10 mm drive pins Saw Blade replace: ProLock” quick change system Saw Blades: Ø 250 – 550 mm; saw blades up to Ø 400 mm can be lowered below table; saw blades up to Ø 400 mm can be used with scoring blades Cutting Heigt: 204 mm. Blade Width: -46° tot +46° Cutting Width: 1.350 mm Scoring Blades: 3-ax electric controlled scoring saw aggregate Cross cut table: Para ...

Homag SawTeq B-300 flexTec equipped with Yaskawa D200 Robot panel manipulator Manufacturer: Homag Type: B-300 flexTec/Profi HPP300/43/43/F M-Nr..: 0-240-69-1263 Year: 2020 Control: Cadmatic 5 Ardis Datensteuerung Labelling: Pica II im Druckbalken YouTube:

MARTIN T73 AUTOMATIK, Parallelogramtisch, angetriebener Rollwagen, 3-Achs Steuerung Mark: MARTIN Type: T73 AUTOMATIC Baujahr: 2001 M-Nr.: V424244 Tischabmessung: 1.350 x 1500 mm. Tischhöhe: 900mm Besäumtisch: 3.300mm Hauptsäge: kW Sägeblattwelle: ø 30 mm. mit zwei Mitnehmerstifte Sägeblattwechsel: Schnellwechselsystem ProLock” Sägeblatter: Ø 250 – 500 mm; bis Ø 400 mm unter Tisch versenkbar; Schnitthöhe: 170 mm. (Sägeblatter. 500 mm.) Sägeblatteschwenkung: 0 – 46° Schnittbreite: 1.350 mm Parallelanschlag: Anschlaglineal in eloxiertes Aluminium; Endstellung; Automatisch unter Tischebene absenkbar Längenanschlag: Digitaler Längenanschlag aus eloxiertes Aluminium mit Martin 2-Punkt Anschläge Steuerung: NC-Steuerung mit LCD-Anzeige der Breite, Höhe- und SchrägeWinkel, plus 2 digitale Längenanschläge Bildschirm: LCD Bedienpult auf Augenhöhe, wegschwenkbar mit Tablea ...

Striebig Standart III 6220A TRK Manufacturer: Striebig Type: Standaart III 6220A TRK Year: 1998 M-Nr.: 28532 Max. Cutting Heigt: 2.100 mm Max. saw width: 5.300 mm Max. Dept/- panelwidth: 80 mm Saw blade diameter: 300 mm Saw Blade Arbor: 30 mm Motor: 4.4 KW Saw RPM: 4.750 rpm Product support bottom: Rolls Sawwall: closed HPL panels Product support small work pieces: Yes Measurement system: analog Turning sawhead: Manual Sawing motion: Manual Machine frame : stand-alone A-frame Dust extraction: TRK system Saw truck fixation: Manual Dimensions: 6.5 x 2.5 x 1.3 m Condition: functioneel gecontroleerd

BSM P450 CE Manufacturer: BSM Type: P450CE M-Nr.: 0904088P450 Year: 2009/04 Cutting height (Max): 135mm Saw diameter (max): ø450 mm Saw blade inner-ø: ø30 mm Saw width (max): 800mm Saw blade tilting: 0-45° Motor: 5,5 kW Weight: 320 kG Including: Table extension rearside

Holzma HPL380/43/22 Profi Manufacturer: Holzma Type: HPL380/43?22 Profi M-Nr..: 0-240-06-8971 Year: 2010 Machine control: Holzma CAD Matic 4 – Professionel, 2D/3D, Ethernetanschluss Windows XP embedded 19″ TFT touchscreen DVD, USB Power: ca. 28 KW – 40A – 3 Ph/50Hz Saw length: 4.300 mm Dept/- panelwidth: 4.300 mm Main saw: 18 KW Bookthickness: 95 mm Max. saw thickness: 82 mm Saw feed speed: 130 m/min Scoring saw: 2,2kW Scorer saw blade: 180 4,6 45 mm Side press: Automatic Holzma patented side press system Pressure beam: Automatic , with programmable pressure Clamps: 7 Sclamps, 75/275/475/1050/1850/2650/3450 Programmable Programmable panel beam: stepless 1-80 m/min. Air cushion tables: 4 tables Table dimensions: 2.170650 mm Label printer: Pica 108 Loading: Rearside automatic lift table . Dimensions: 4.300 2.200 mm, fitted with heavy duty rolls Destacking: Panel surface protecti ...

Martin T60C-Automatic panel saw Manufacturer: Martin Type: T60C-AUT M-Nr.: V474295 Year: 2007 Control panel: Eye-level integrated in dust extraction cover 2-ax control + 3rd-ax integrated in central control, but handwheel setting (Saw height, tilting, width) Mainsaw: ø400 mm, bookthickness; 0-130 mm, tilting 0° – 46° RPM: 4.000/4.800/6.000 rpm Motor: 5.5 KW Scoring saw: Yes 3 Ax-controlled Sliding table: 3.300 mm Width: 1.250 mm Side table: steel, galvanised, with angle pre-fix 0º, 22,5º, 30ºen 45º; dimensions: 1.340650 mm Cross cutfence: 2.200 – 3.300 mm with digital reading, 2 flipstops on bearing guided rollers and fine-setting Dustextraction: Top: ø100 mm, bottom: ø120 mm Weight: 1.400 KG Condition: fully functional – in good condition

Martin T60 Classic panel saw Manufacturer: Martin Type: T60C M-Nr.: V447804 Year: 2007 Control panel: Eye-level integrated in dust extraction cover 2-ax control + 3rd-ax integrated in central control, but handwheel setting (Saw height, tilting, width) Mainsaw: ø400 mm, bookthickness; 0-130 mm, tilting 0° – 46° RPM: 4.000/4.800/6.000 rpm Motor: 5.5 KW Sliding table: 3.000 mm Width: 1.250 mm Cross cut table: Steel, galvanized with fixed angle stops 0º, 22,5º, 30ºen 45º; dimensions: 1.340 650 mm Cross cutfence: 2.200 – 3.300 mm with analog tape measurement, flipstop with magnuifying glass Dustextraction: Top: ø100 mm, bottom: ø120 mm Weight: 1.400 KG Condition: fully functional – in good condition

Martin T60C-Automatik Formatkreissäge Marke: Martin Type: T60C-AUT M-Nr.: V477921 Baujahr: 2007 YouTube:

SCM Prima N67 AE032853 2010 Manufacturer: SCM 2010 Type: Prima N67 M-Nr..: AE032853 Year: 2010 Machine control: PLC Manager 100, PC Wincut software – Windows embedded 17″ TFT screen YouTube:

Key data: 5300 mm, 2200 mm

Vertical panel saw completely overhauled shared budget Strip attack Brakeable support rollers

Maggi 640 Junior Manufacturer: Maggi Type: 640 Year: 199. Cutting height: 125mm Stroke: 450mm Saw eleavation: 90mm Saw diameter: ø400mm Arbor: ø30mm Motor: 3 kW RPM: 2800 rpm Dust extraction: 2x 100mm

Graule Model ZS 135/N (tilting and swivelling) Motor: 2 or 3 KW 400 Volts Cutting height: 135 mm – 90°, 92 mm – 45°tilted Stroke: 460 mm – 90° and 320 mm – 45° Saw: 350 mm Swivelling: 45° – 90° – 25° Titling: 45° – 90°