saws used for sale

cutting diameter: 220 mm saw band length: 2450 mm cutting width: 250 mm cutting speed: 40 / 80 m/min dimensions of saw-band: 2450 x 27 x 0,9 mm : 100 mm : 90 mm : 90 x 90 mm : 160 mm : 160 x 110 mm : 250 x 190 mm total power requirement: 0,75 / 1,1 kW table height: 925 mm weight of the machine ca.: 218 kg dimensions of the machine ca.: 1300 x 700 x 1530 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mm capacity 90 degrees: flat: 350 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: flat: 230 x 200 mm capacity 60 degrees: round: 175 mm capacity 60 degrees: flat: 170 x 100 mm cutting speed: 18 - 110 m/min vice: max. 350 mm dimensions of saw-band: 3370 x 27 x 0.9 mm engine output: 1.5 / 1.8 kW weight of the machine ca.: 880 kg range L-W-H: 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF) The data for  ...

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm stroke: 100 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 - 90 m/min total power requirement: 2,6 kW weight of the machine ca.: 375 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm cutting diameter: 135 mm capacity 90 degrees: flat: 280 x 70 mm capacity 90 degrees: square: 120 x 120 mm capacity 45 degrees: flat: 210 x 55 mm capacity 45 degrees: square: 105 x 105 mm turning speeds: max. 3000 U/min saw-blade dia.: 400 x 3,2 x 40 mm motor: 400 Volt total power requirement: 4,0 kW weight: 650 kg range L-W-H: 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 290 mm saw band length: 4000 x 27 x 0,9 mm table height: -- mm cutting width: 300 mm band speed: 20 - 100 m/min load centre: 290 mm rotary disc high: 290 x 300 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 280 x 240 mm height of the workpiece: 1800 x 1900 x 1750 mm weight of the machine ca.: 2200 kg - Fully automatic electro-hydraulic band saw - electric feed unit - max. feed 520 mm - front control panel - electro-hydraulic material clamping - semi-automatic & automatic mode selectable - Miter cuts - Automatic operation up to 45° right - Miter cuts - Semi-automatic operation up to 60° right - stepless adjustment of the saw blade speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mm saw band length: 3375 mm cutting width: 350 mm dimensions of saw-band: 3375 x 27 x 0,9 mm : 305 mm : 260 mm : 350 x 200 mm : 250 mm : 230 mm : 230 x 200 mm : 175 mm : 155 mm : 170 x 100 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 1,8 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4700 € : 315 mm : 315x32x63 mm : 45 / 90 U/Min : 45 ° : 45 ° : rund 105 mm / quadratisch : rund 90 mm / quadratisch : rund 90 mm / quadratisch : 1,3 - 1,8 kW : 600 mm : 1000 mm : 1400 mm : 200 kg Manual vice Robust double joint pivot Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split vice (clamps before and after the sawblade) Sawblade not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 107500 € : 2031.75 € : 360 mm : Ø360 x 40 mm : 40 - 280 U/Min : rund: 20 - 100 mm, quadra : 60 mm : 10 - 9999 mm : 900 mm : 15 kW : 3400 mm : 2675 mm : 2750 mm : 3450 kg : 21,65 kW Mass production in continuous operation is done by BMDO 100 XS when producing cut-off pieces of steel and non-ferrous metals with a material cross-section up to a diameter of 100 mm. BMDO 100 XS is designed to be used with TCT circular saw blade in order to cut solid bars in high speedand excellent precise. It is also suitable for HSS blades to cut tubes. With the Standard 800mm stroke servo feeding and 6 meters automatic loader. BMDO 100 XS is perfect for large-scale production of solid bars. STANDARD ACCESSORIES: automtic loader 6 m motorized roller table 3 mMikrospray Coolant Hydraulic Vice Inverter Control Panel Saw Blade Brush Cover Switch Heavy Duty Gear ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 € : 98.43 € : 315 mm : 315x32x63 mm : 45 / 90 U/Min : rund 105 mm / quadratisch : rund 90 mm / quadratisch : 4.7 kW : 600 mm : 1000 mm : 1400 mm : 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band Saw Jäspa comfort 420 A-M BJ 2014

BEHRINGER HBP 340 G ist eine Bandsäge für Präzision, hohe Genauigkeit und Zuverlässigkeit. Schnittbereich: rund bis 340 mm; vierkant 340×340 mm; Tischneigung ±45°. Daten: Band 4860 mm×32 mm×1 mm; Geschwindigkeit 15–100 m/min (stufenlos); Anschluss 3×400 V 50 Hz; Abmessungen L3100×B1100×H1700 mm. Zubehör: hydraulischer Schraubstock, Kühleinrichtung, Späneförderer. Erreicht enge Toleranzen; ideal für Automotive, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

KASTO SSB 260 VA ist eine Bandsäge für Präzision, hohe Genauigkeit und Zuverlässigkeit. Schnittbereich rund 10-260 mm, vierkant 260×260 mm; Schnittlänge 5-680 mm; Vorschublänge 680 mm; Bandgeschw. 15-125 m/min; Band 4115×41×1 mm. Anschluss 3×380 V 50 Hz; Leistung 4/6,5 kW; Gewicht ~1915 kg; Maße L2125×B1930×H2100 mm. Zubehör: automatischer Vorschub, Materialauflage 1 m, Rollenbahn, Kühlung, Späneförderer. Erreicht enge Toleranzen; Branchen: Automotive, Maschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

BTM 320 - 420A/CNC ist eine Bandsäge für hochpräzise, sehr genaue und zuverlässige Schnitte. Kapazität: Rund- und Vierkantschnitt bis 410 mm; Schnittgeschwindigkeit stufenlos 10–100 m/min; Tischneigung rechts 60°. Technische Daten: Bandrollendurchm. 450 mm; Bandlänge 5300 mm; Bandbreite 34 mm; Banddicke 1 mm; Schraubstockdruck 3–25 bar; Anschluss 50 Hz 3x380 V; Antriebsleistung 2 kW; Gewicht ~2300 kg; Abmessungen L3250×B1910×H2100 mm. Geeignet für enge Toleranzen; Anwendung u.a. Automotive, Werkzeugbau, Luftfahrt, Medizintechnik, Uhrenbau. Technische Daten ohne Gewähr

KASTO SSB 260 VA ist eine Bandsäge, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Schnittbereich: rund/quadratisch bis 260 mm; Durchmesser min. 10 mm; Schnittlänge 5–600 mm; Reststück min. 10 mm. Technische Daten: Bandlänge 4115 mm, Bandbreite 41 mm, Bandstärke 1 mm; Bandgeschwindigkeit stufenlos 15–125 m/min; Sägemotor 4 kW; Leistung 8 kW; Anschluss 3x380 V 50 Hz; Gewicht ca. 2200 kg; Abmessungen L2400×B1600×H2500 mm. Zubehör: automatischer Vorschub, Eingangsauflage 1 m, Rollenbahn, Kühlmitteleinrichtung, Späneförderer. Erreicht enge Toleranzen; Einsatz in Automotive, Präzisionsmechanik, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

TRENNJAEGER TEBA240CF-NC ist eine Bandsäge für hohe Präzision, Genauigkeit und Zuverlässigkeit. Schnitt Ø/Quadrat/Flach bis 240 mm; Schnittgeschwindigkeit 30–90 m/min. Bandrolle Ø300 mm; Band 2170×27×1 mm. Anschluss 3x400 V 50 Hz, 2,8 kW; Gewicht ~750 kg; Maße 2100×1500×1450 mm. Ausstattung: Satz Sägebänder, Rollenbahn, Kühlmitteleinrichtung 25 l. Erreicht enge Toleranzen; geeignet für Automotive, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

WOODSTER ist eine Kreissäge für Holz, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Es liegen keine Angaben zu Arbeitskapazitäten (Sägeblattdurchmesser, Schnitthöhen, Verfahrwege oder maximalen Werkstückdimensionen) vor. Ebenso fehlen detaillierte technische Daten wie Spindeldrehzahlen, Vorschubwerte, Stromversorgung, Abmessungen oder Gewicht. Die Maschine ist darauf ausgelegt, enge Toleranzen zu erreichen, und eignet sich für Tischlerei, Möbelproduktion, Holzverarbeitung und Bau Technische Daten ohne Gewähr

BIANCO 370 SA ist eine Halbautomatische Bandsäge, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Schnittbereiche: rund bis 280 mm; vierkant 240 mm; flach 370×140 mm; bei 45°: rund 225 mm, vierkant 215 mm, flach 230×140 mm; bei 60°: rund 140 mm, vierkant 140 mm, flach 140×130 mm. Technische Daten: stufenlos 35–70 m/min; Bandlänge 3120 mm; Bandbreite 27 mm; Banddicke 1 mm; Antriebsleistung 2 kW; Gewicht ~465 kg; Abmessungen 1500×1400×1500 mm. Zubehör: hydraulischer Schraubstock, Satz Sägebänder, Materialanschlag. Erreicht enge Toleranzen; geeignet für Automobil, Uhrenbau, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

FORTE FORTEMAT SBA 241 ist eine Bandsäge mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Kapazität: rund/quad bis 250 mm; Schnittlänge 3 mm–2×400 mm; Geschwindigkeit 14–116 m/min; Rolle 460 mm; Band 4100 mm. Daten: 3×380 V 50 Hz; 4,00 kW; Gewicht ~1500 kg; Abmessungen L1700×B1500×H1350 mm. Zubehör: automatischer Vorschub, Rollenbahn, Kühlmitteleinrichtung. Geeignet für enge Toleranzen in Automotive, Maschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

REMET TR 70 ist eine Kreissäge, die Präzision, hohe Genauigkeit und Zuverlässigkeit für industrielle Schneidaufgaben bietet. Konkrete Arbeitskapazitäten (Durchmesser, Module, Längen, Verfahrwege, Werkstückmaße) sind in den vorliegenden Informationen nicht angegeben. Genaue technische Daten (Spindeldrehzahlen, Vorschubraten, Stromversorgung, Abmessungen, Gewicht) liegen nicht vor. Entwickelt, um enge Toleranzen zu erreichen; geeignet für Branchen wie Automobil, Luftfahrt, Werkzeugmaschinen, Medizintechnik und Uhrenbau. Technische Daten ohne Gewähr

FORTE FORTEMAT SBA 241 ist eine Bandsäge mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Schnitt: Rund/Vierkant Ø250 mm; Länge 3 mm–2×400 mm. Daten: 14–116 m/min stufenlos, Bandrolle Ø460 mm, Band 4100 mm, 4 kW, Anschluss 50 Hz 3x (Volt), Gewicht ~1600 kg, L1700×B1500×H1600 mm. Ausführung: horizontal, hydraulisch, automatisch. Zubehör: automatischer Vorschub, Kühlmittel. Ermöglicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Maschinenbau. Technische Daten ohne Gewähr

MEP SHARK 281 SXI EVO ist eine Bandsäge für präzise Bearbeitung, mit hoher Genauigkeit und Zuverlässigkeit. Schnittbereich: Rund 250 mm, Vierkant 230 mm, Flach 280x200 mm (45°: 190/180/180x180; 60°: 120/110/110x110). Schnittgeschw. 36–72 m/min; Band 2950x27 mm (Dicke 0.9 mm); Spannstocköffnung 285 mm; Sägemotor 1.8 kW; 3x400V 50Hz; Gewicht 435 kg; Abmessungen 2000x1000x1840 mm; Kühlmitteleinrichtung 13 l. Geeignet für enge Toleranzen in Automotive, Feinmechanik, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

: neu : ca. 10 Wochen ab Auftrags : Türkei : 8500 € : 164.05 € : 350 mm : 350x32x63 mm : 45 / 80 U/Min : 45 ° : 45 ° : rund 115 mm / quadratisch : rund 110 mm / quadratisch : rund 110 mm / quadratisch : 5.85 kW : 1100 mm : 1000 mm : 1400 mm : 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included OPTION: saw blade Dm. 350 mm € 180,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm saw band length: 3900 mm total power requirement: 3 kW weight of the machine ca.: 0,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 ° Length of the rolling table: 3200 mm cutting width: 1350 mm Motor output: 5,5 kW Cutting height: ca. 153 mm mm Saw blade diameter: 450 mm Speed: 3000/4000/5000/6000 U/min. weight of the machine ca.: ca. 1.000 kg : Nein : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 600 mm Cutting height: 380 mm cutting width: 580 mm Motor output: 2,2 kW Table dimensions: 600 x 540 mm Table tiltable: 45 Grad machine weight ab.: 270 kg : Ja dimensions of machine: 2.085 x 1.035 x 820 mm cutting speed: 1.350 m/min sawblade width: 6-25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mm saw band length: 3370 mm cutting width: 350 mm dimensions of saw-band: 3370 x 27 x 0,9 mm : 305 mm : 260 mm : 350 x 200 mm : 250 mm : 230 mm : 230 x 200 mm : 175 mm : 155 mm : 170 x 100 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1700 x 1500 x 1950 mm Features: - Semi-automatic operation via automatic saw frame lowering - Miters: left 60°, right 45° - 2 speeds: 40 and 80 m/min - Solid material support table - Operatorâs manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 5.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIE) - With miter cuts from 45° right to 60° left Mitre adjustment via a large turntable - MEP EVO microprocessor control for managing all functions Front right, swiveling - Optional manual or automatic lowering of the saw frame Stepless adjustment of the saw frame lo ...

saw blade diameter: 550 mm Under-table saw for aluminum and PVC Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 290 mm capacity 90 degrees: flat: 320 x 290 mm capacity 45 degrees: flat: re 240 x 150 mm capacity 45 degrees: round: re 240 mm capacity 60 degrees: flat: re 150 x 180 mm capacity 60 degrees: round: re 150 mm capacity 45 degrees: flat: li 240 x 100 mm capacity 45 degrees: round: li 240 mm turning speed range:: 20 - 100 m/min saw band length: 3100 x 27 x 0.9 mm power capacity: 2.4 kW weight of the machine ca.: 570 kg range L-W-H: 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model F) - Ergonomic control panel - Micro-spray lubricati ...

cutting diameter: 300 mm capacity 90 degrees: flat: 320 x 290 mm capacity 45 degrees: flat: re 300 x 280 mm capacity 45 degrees: round: re 300 mm capacity 60 degrees: flat: re 190 x 200 mm capacity 60 degrees: round: re 200 mm capacity 45 degrees: flat: li 270 x 200 mm capacity 45 degrees: round: li 270 mm turning speed range:: 20 - 100 m/min saw band length: 3660 x 27 x 0.9 mm power capacity: 2.4 kW weight of the machine ca.: 650 kg range L-W-H: 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable For miter cuts from 45° left to 60° right - Hydraulic feed mechanism Material clamping - Ergonomic control panelâfront right, swiveling - Coolant system - Operatorati ...

Wood Band Saw Holzkraft HBS 840 AS Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

cutting diameter: Ø 255 mm capacity 90 degrees: square: 230 mm capacity 90 degrees: flat: 300 x 180 mm dimensions of saw-band: 2765 x 27 x 0,9 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: square: 190 mm capacity 45 degrees: flat: 200 x 160 mm capacity 60 degrees: round: 135 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 130 x 100 mm cutting speed: 18- 110 m/min power requirement: 1,5/ 1,8 kW dimensions: 1,7 x 1,95 x 1,83 m weight of the machine ca.: 0,8 t full automatic one side miter bandsaw NC- controlled - miter cut left 45° full automatic mode - miter cut left 60 half automatic mode - CNC- controll for 10 saw programms and 99 subroutine - automatic lenght movement with ballscrew - roller conveyor feed side - stepless cutting speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaltenbach KKS 450 U Metallkreissäge (2021) Hersteller: Kaltenbach Typ: KKS 450 U Baujahr: 2021 Zustand: gebraucht, sehr gut Spannen, Sägen, Rücklauf, Öffnen ? einfach per Knopfdruck Halbautomatische Gehrungskreissäge Arbeitsbereich 150 mm Sägeblatt Ø bis 450 mm Gehrungsverstellung 180° Einstellung der Schnitthöhe über Drucktaster Zwei Schnittgeschwindigkeiten Lieferumfang: ? Dokumentation ? 2m Zufuhrrollenbahn ? 2m Abfuhrrollenbahn mit digitalen Materialanschlag ? 2x Sägeblätter

Behringer Eisele VMS 350 Vertikalkreissäge / Metallkreissäge Hersteller: Behringer Eisele Typ: VMS 350 Zustand: NEU Bearbeitungsquerschnitt max. rund bei 90° 120 mm Bearbeitungsquerschnitt max. Rechteck bei 90° 170 x 100 mm Bearbeitungsquerschnitt max. rund bei 45° 120 mm Bearbeitungsquerschnitt max. Rechteck bei 45° 120 x 100 mm Sägeblattdurchmesser 350 mm Sägeblattbreite 3 mm Bohrungsdurchmesser 40 mm Einstellbare Sägeblattdrehzahl 17 U/min / 34 U/min Maschinenoberteil schwenkbar 45-90-45-30° Motorleistung gesamt 1.4/1.9 kW Breite 900 mm Länge x Breite x Höhe 1050 x 900 x 1900 mm

Model FSK Dimension of sliding table- 3000x330mm Gross cut capacity- 2700mm Width of cut between saw blade and rip fence - 1650mm Saw blade diameter - 400mm Scoring saw blade diameter - 120mm Height of cut - 125mm Speed levels 3 Tilting saw blade - 0-45º Saws lifting, up and down, mechanical control. Main motor - 5,5 kW Scoring motor - 1,1 kW With clamp Weight: 780 kg Transport dimensions - 3100x1300x1200mm Price 1500 Eur (EXW Jonava, Lithuania)

Key data: 45 °, 2250 mm, 900 mm

400 V, 50 Hz, 5 Kw, 10 A, Sliding table 2250x270 mm, Boom table 950x600 mm, Cut-to-length stop 2650 mm, extendable, Cutting width 900 mm, Cutting height 90 mm, Saw blade 250-315 mm, Extraction connection 125 mm, Work table 1500x1000 mm, Weight 410 kg

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 500 mm - max. cutting length: 3000 mm - hydropneumatic feed - vertical and horizontal pneumatic profile mounting

Circular sawing machine. Raw bitsun, unfortunately no technical data.

Number of motors: 1 Stück 0: 2500 mm Control: nein Hecht ES 350 single-sided glazing bead saw -------------------------------------- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mm cutting diameter: 100 mm : mm cutting speed: 40 / 80 U/min total power requirement: 1,2 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,8 x 0,6 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 0-46 ° Length of the rolling table: 3200 mm cutting width: 1000 mm Motor output: 5,5 kW Cutting height: 179 mm Cutting height at 45°: 123 mm Saw blade diameter: 500 mm Speed: 3/4/5000 U/min. weight of the machine ca.: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll diameter: 300 mm Throat depth: 450–500 mm Max. workpiece height: 220 mm Table size: 600 × 600 mm Table swivel: yes, partly in 2 directions Saw blade length: 3350 mm Saw band width: approx. 10 mm Belt speed: 15 – 125 m/min or 125 – 1000 m/min partially. infinitely variable Weight: approx. 700 kg Dimensions: 1000 × 700 × 1800 mm Equipment: -Integrated belt welding machine (IDEAL BS00) -Sharpening stone for deburring the weld seam -Stepless speed control

Key data: 45 °, 3700 mm, 1000 mm

Experience precision and quality with the Altendorf sliding table saw type F45, an indispensable tool for any woodworking. Equipped with a robust 5.5 kW motor, this high-quality device enables clean and efficient cuts in a wide variety of wood species. The machine is characterized by its space-saving requirement of only 23002900910 mm and is easy to position with a weight of around 1000 kg. Made in Germany in 1992, the circular sawmill stands for durability and reliability. Its country of origin and year of manufacture guarantee excellent workmanship and technology that is specially tailored to the requirements of woodworking. Ideal for craftsmen and professionals who value precise results and solid workmanship. Various accessories according to photo Test run possible, only collection, help with loading possible. Prepayment or cash on pick-up No Guarantee or Warranty

Auction-ID: A1-49846-5

cutting diameter: 360 mm saw band length: 4870 x 41 x 1,3 mm cutting width: 360 mm cutting speed: 11 - 110 m/min : 4,0 kW height of the workpiece: 800 mm weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,3 x 1,9 x 2,2 m Automatic hydraulic band saw with - SIMATIC OP17 NC control - Single material feed 600 mm - Max. programmable length 6000 mm - Hydraulic saw blade tensioning (36–40 bar) - Motorized chip conveyor - Emergency stop device - infeed roller conveyor 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multi-rip saw Manufacturer: Raimann Model No.: KS230 Year of Make: 1992 Saw Motor 22KW

cutting diameter: 335 mm capacity 90 degrees: flat: 500 x 335 mm saw band length: 4400 x 34 x 1.1 mm speed: 15.0 - 150 m/min work height max.: 750 mm workpiece weight: 250 kg/m coolant tank capacity: 80.0 ltr. oil volume: 30.0 ltr. power capacity: 5.5 kW weight of the machine ca.: 1800 kg range L-W-H: 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon request Features: - MEBA - Fully automatic two-column linear guide system Fully automatic machine for 90° cuts only - Automatic material feed - Continuously variable lowering speed 0â300 mm/min - Band saw speed controlled by frequency-regulated AC drive (15â150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping blocks - Operatorâs manual The data for this ad was created with ModulMWS - the software solution ...

Panel saw Type: F45 ElmoDrive Manufacturer: Altendorf Year: 2022 Basic equipment: Sliding table 3400 mm CNC-controlled parallel fence, electromotor-adjustable 0–1300 mm Mitre fence extendable up to 3200 mm Main motor power 5.5 kW / speeds 3000/4000/5000 rpm Max. blade diameter: 500 mm Max. cutting length: 3300 mm ELMO DRIVE control system 12” touch display with keyboard Up to 9,999 programs Automatic dimension correction when cutting at angles Extended tool management (up to 100 stored tools) Functions: grooving, angle cutting, geometric shape calculations, calculator, USB interface, machine diagnostics Automatic calculations for angled and bevel cuts Simple, intuitive interface with quick access to functions Machine equipment: Increased main motor power to 5.5 kW CNC parallel fence – cutting width 1300 mm Extension of the sliding table to 3400 mm DIGIT L an ...