saws used for sale

0: 355 - 4010 mm Working height: bei 90° = 315 mm 0: 45°/90°/45° 0 weight: 2050 kg Cutting height at 45°: 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 120 mm

Resawing saw – trimming saw MEM Cobra Year of construction approx. 1995, completely overhauled. Very good condition! Cutting height max. 120 mm, passage width max. 1070 mm. 4 axes variable. 2 x 55 KW drive power saws. Refurbished machine. Optionally, we can make a completely new Spreissel separator (see sep. Photo last page) and sawing axes positioning control (see photo) Plant immediately available for takeover!

0: 355 - 4010 mm Working height: bei 90° = 290 mm 0: 45°/90°/45° 0 weight: 1800 kg Cutting height at 45°: 210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mm cutting diameter: 100 mm saw blade turning speeds: 40 / 80 U/min capacity 90 degrees: square: 90 mm capacity 90 degrees: round: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26003 Technical data: - Saw blade diameter up to 370 mm - Cutting range at 90° around 110 mm - Square 100 mm - Rectangle 280 x 40 mm - or 240 x 85 mm - at 45° around 110 mm - Square 100 mm - Rectangle 220 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 380 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

cutting diameter: 230 mm cutting speed: 35 - 70 m/min cutting width: 260 x 200 mm : mm saw band length: 2720 x 27 x 0,9 mm total power requirement: 1,1 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1,8 x 1,8 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

380 V 1.5 KW Length 0.6 m Width 0.5 m Height 1.40 m Color: Gray Weight 98 kg Unaudited Hobbyist object

Veneer Saw Scheer Type FM 3 Machine No. 113462 Cutting length 3000 mm Cutting height maximum 55 mm Maximum insertion height 60 mm Saw blade diameter maximum 180 mm Saw blade on the machine diameter 150 mm Motor power 1.65 kW Feed manual Height adjustment with handwheel With rear table support 3120 mm x 600 mm Dimensions 3450 mm x 1130 mm x H 1400 mm Weight approx. 450 kg

Inv. Num. : 9123 Type: OPTIMAT HPL 11/43/22 Producer: HOLZMA Created: 2003 Parameters: Saw blade diameter: 450 mm Table dimensions: 4300 x 2200 mm Equipment: Loading platform

Graule ZS 135 with roller conveyor and length stop

Graule ZS 170 with roller conveyor and length stop

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

Panel sizing saw format 4 type Kappa Automatic 80 Technical data: - Cutting width (mm): 4300 - Cutting depth (mm): 4200 - Cutting height (mm): approx. 80 - Power (kW): 16 - Vacuum plate lifter: included

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

Sliding table saw Felder type K 940S Technical data: - Table length (mm): approx. 3000 - Power (kW): 5.5 - Scoring machine: included - Saw blade: swivelling

Schumacher Timber Circular Saw The machine was completely overhauled by us. Rewired / new control cabinet Main motor 2 x 14KW Table to saw 6m, can be extended by 1.3m. If you have any questions about the machine, please feel free to call me or write me a message. The machine is immediately ready for use.

Pendulum saw/cross-cut saw type PS 50/F built in 2025 with support table As good as new, never used cross-cut saw with support table re/li total 2,700 mm, incl. 2 x rollers. Saw blade diameter 500 mm. Cross-cut depth max.: 145 mm, cross-cut width max. 510 mm 5.0 kW drive power

PART NUMBER 8006 SPECIFICATIONS - max diameter of the main disc with a scoring scoring rod 350mm - max diameter of the main blade without a scoring rod 450mm - cutting height with the blade in place: 350mm, 100mm - electric adjustment of the main disc up/down + angle - Electric angle display - electric adjustment of the undercut up/down, right/left - spindle diameter 30mm - Spindle locking - with a sliding trolley - cutting length on a trolley 3400mm - cutting width at the guide 1300mm - with sidecar - with an undercutter - max scoring diameter 120mm - spindle diameter 22mm - 0.75kW scoring motor - main motor 5.5kW - 4 types of rotational speed - electronic speed display - Diameter of the extraction port 120mm, 80mm - table top dimensions 1220x730mm - Table top dimensions with widening 1440mm - Table top dimensions with extension 2060mm - shield cover - dim ...

Key data: 500 mm

Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device USB Port Instruction manual Weight: 1400 kg

PART NUMBER 7991 SPECIFICATIONS - max blade diameter 400mm - blade hole diameter 30mm - shield cover - Adjustable arm up/down - max cutting height 120mm - max cutting width 540mm - hydraulic saw movement - 3 introductory rollers in the countertop - 3.7kW motor - hydraulic pump motor about 0.55kW - Diameter of the extraction port 110mm - roll width 530mm - machine dimensions l/w/h 1900x1500x1950mm - weight 650kg ADVANTAGES – Polish production – DTR documentation – very good condition – used saw Net price: 13900 PLN Net price: 3310 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

230 V, 2.0 Kw, 50 Hz, 9.6 A, Extraction connection 2x 40 mm, Saw blade 250 mm, Cutting height 80 mm, Cutting width 250 mm, Cutting length, sliding table 2000 mm, Work table 730x830 mm, Boom table 370x470 mm, Boom with hold-down, extendable 2000 mm, Rip fence with angle adjustment, 45° angle adjustment right/left

Inv. Num. : 9184 Type: HA 250 W Producer: AMADA Created: 2024 Parameters: Saw blade dimensions: 3505 x 34 x 1.1 mm Weight: 1500 kg

Saw blade Ø: 350 mm thereby cutting area Round: 120 mm Square: 100 x 100 mm Rectangle: 170 x 100 mm 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Approx. space requirement: 800 x 700 x 1770 mm

Table saw, precision circular saw Manufacturer: Rapid Model; PK-100 Motor: 2.2 KW

Key data: 420 mm, 170 mm, 115 mm

400 Volt three-phase brake motor Saw blade diameter 420 mm, Saw blade holder 40 mm, Cutting height 170 mm, Saw blade inclined to 45°: cutting height 115 mm , Cutting length 410 mm INCLUDED: Machine can be tilted from the front on both sides via hand crank Additional price for 3 kW 400 volt motor Hydraulic feed brake Laser setup Pneum. Material tension on both sides, from above Carbide circular saw blade 420x3.4/2.4 x40 mm 48 WZ neg Machine stand

cutting diameter: 360 mm saw band length: 0 mm cutting width: 0 mm cutting speed: 0 m/min total power requirement: 1,0 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 2,2 x 2,05 x 1,5 m Horizontal Bandsaw - Max. Miter Angle: 45° - Coolant System - Emergency Stop - 1300 mm Infeed Roller Conveyor - 2 Spare Saw Blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 700 mm

A Behringer HBP 530 is hereby sold, as this is no longer needed if you are interested, please feel free to write to us

Grecon Dimter Opticut S50 Optimizer Material input length max: 5000mm Wood width min/max 20-300mm Wood thickness min/max 10-100mm Packet cutting capability Cutting out material defects CE Certificate

Includes roller conveyor (approx. 250cm infeed and 120cm with stop) Adjustable stop with scale Automatic clamping and feed Max. saw blade diameter 400mm Miter cut Coolant pump Documentation 400V

IRION trimming circular saw without cross-cut saw system Saw Blade Fixe ( Electrically Singable ) Cut length 6200 mm Cutting height 150mm Attention: Saw blade electrically "singable" Ready to ship!

- 1 x KLAEGER band saw HBA 265 built in 2001 - 1 x KLAEGER band saw HBA S265 built in 2008

Mitre punch - angle cutting machine Manufacturer: Dan-List / Morso Model No.: EH Year of Make: 2008 Fully automatic, electric - pneumatic, 2-hand control Double mitre 45° Single mitre up to 90° Working width max. 100 mm Working height max. 180 mm Cross-section: 70 / 70 mm

saw blade diameter: 225 x 32 mm cutting diameter: max. 70 mm bei 90° mm miter cut: 0°-45°-60° miter cut: 1° Skala spindle turning speed range: 42 / 84 U/min Max. round cutting cross-section at 90°: 70 mm Max. rectangular cutting cross-section at 90°: 80 x 50 mm Max. round cutting cross-section at 45°: 64 mm Max. rectangular cutting cross-section at 45°: 60 x 50 mm Saw blade diameter: 225 mm Bore diameter: 32 mm Includes lubrication system Includes base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross-Cut Saw MZ Project CS 1000 Optic Cutting width 1000mm Cutting height 100mm Saw size 550mm Electronic Raising and Lowering of the Pressure Beam Material Automatic material feeding Side discharge of cut material Introductory table length 320cm Receiving table length 255cm Width of rollers in tables 650mm Year of manufacture 1999 Operating pressure 6bar CE mark Machine dimensions 650x190x190cmH Net price

Vertical - Band Saw MÖSSNER SM 420 - Roll diameter 420 mm - Projection 410 mm - Workpiece height 265 mm - Saw blade length 3150–3260 mm - Saw band width max. 16 mm - Table size 600 x 600 mm - Working height 1000 mm - Total power requirement 1.1/1.7 kW - Incl. welding device - Incl. grinding device - incl. work light - incl. semi-hydraulic - Weight feed device - Incl. tilting work table - incl. operating instructions LxWxH 0.9x0.9x1.9 meters / Weight 500 kg

KASTO U 10 / Metal circular saw with material support -CE marking -Year of construction 2012 -Cutting area / Round 90 degrees /100x100mm -Cutting area / Flat 90 degrees / 90x90mm -Cutting area / square 90 degrees / 170x90mm -Mitre cutting device -Coolant device -Vise with counter-clamping device for burr-free cutting -Infinitely adjustable saw feed -2x saw cutting speeds -Dimensions circular saw blade 350x2.5x32mm -Saw motor 1.8 KW Dimensions: LxWxH 1.2x0.8x1.9 meters / Weight 500 kg

FORTE SBA 240 - Fully automatic band saw / 2x column-guided -Cutting diameter 250mm -Cutting speed 10-70 m/min -Multiple feed -Saw blade length 3660x27x0.9mm -Total power requirement 3 KW -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2x1.7x1.6 meters / Weight 1000Kg

Panel sizing saw Schelling type FH6 330/330 Technical data: Main motor (kW): 27 Scoring Saw Length (mm): 3300 Saw width (mm): 2200 Panel thickness (mm): 40 All information is manufacturer's information

Optimum 275 N Demonstration Machine Model: Opti S 275 N Technical data: Cutting range 0 degrees round: diameter 225 mm Cutting area 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees round : diameter 160 mm Cutting range 45 degrees: 160x160 mm / rectangle Cutting range 60 degrees round: diameter 100 mm Cutting range 60 degrees: 100x100 mm / rectangle Lifting the saw bracket: manual Feed: infinitely adjustable

cutting diameter: 420 mm saw band length: 5744 x 1,3 x 41 mm cutting width: 420 mm cutting speed: 15 - 110 m/min : 7,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,9 x 2,4 x 2,1 m Hydraulic band saw machine with - Material feed 1000mm - Motorized saw blade tension - Emergency stop device - Replacement saw bands The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mm saw band length: 4870 mm cutting width: 500 x 250 mm table height: 640 mm size of profile - max.: 400 x 400 mm cutting speed: 40 - 120 m/min saw band length: 4870 x 27 x 0,9 mm total power requirement: 3,0 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,0 x 1,0 x 1,5 m Manual band saw Hydraulic saw blade tensioning Hydraulic workpiece clamping Hydraulic saw frame lift/lower Includes 4 spare saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multi-Rip Saw Kälin CML Type SCA 350 KA-N Built in 1995 Chain width 350 mm Chain with spikes (approx. every second chain link) With 3 laser directional lights Cutting height maximum 120 mm Motor power 22 kW Saw blade diameter maximum 350 mm Saw blade diameter minimum 220 mm Saw blade bore 70 mm Saw shaft 3500 rpm Feed speed 0 – 36 m/min. Maximum passage width 800 mm Feed motor 1.5 kW Operating current 49 A Weight approx. 2,200 kg

Band Saw Bizerba FK 23, completely in stainless steel, with brake, portioning stop, new scrapers and new saw blade, Connection 400V, year of construction 2008, dimensions LxWxH approx. 60x52x85cm, weight approx. 75kg, good used condition, works perfectly

Key data: 5300 mm, 2200 mm

vertical panel saw Cutting dimension max 5300 x 2200 x 80 mm Motorized evasive rear wall Funding Strip attack

CUTTING . TRIMMING SAW machine for solid wood MZ PROJECT LC 4000 second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. Maximum cutting length: mm.4000 motor power: Hp 15 Total weight: kg. 3.000 volts: 380/50

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm Saw blades cannot be swivelled 2 saw motors Motor power approx. 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2000 mm Weight approx. 1300 kg Shipping dimensions approx. 3900 mm x 1300 mm x H 1200 mm

roll diameter: 400 mm throat: 400 mm workpiece height: mm table-size: 610 x 500 mm saw band length: 2780 - 2980 mm turning speeds: 22 - 147 m/min total power requirement: kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,6 x 0,8 x 1,9 m Bandsaw with - Ideal welding unit - Grinding unit - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26171 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.8 / 2.7 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical hydr. Metal Clamping + 2pcs hydr Horizontal Metal Clamp - Coolant device - Feeder – roller conveyor with tray 5000 mm - Discharge – roller conveyor with dimension stop and positioning control 4000 mm - Space requirement approx. W 900 x H 1950 x D 1200 mm - Weight approx. 850 kg

Offer 26167 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical metal clamping - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg - Feeder – roller conveyor with shelf 4000 mm - Discharge – roller conveyor with dimension stop 4000 mm

Diehl straight line rip saw Model SL-52 wide arm 54" between saw blade and column glue line quality