saws used for sale

Multi-Blade Saw Paul K3 / 800 Working width 800 mm Cutting height 60 mm 1 saw shaft, saw blades are adjustable via extension rings Connected load 23.5 kW Technically good condition

Multi-Rip Saw Paul K4G 800 Working width 800 mm Cutting height 100 mm with 2 saw shafts with fixed attachment, saw blades are adjustable via rings (1 saw shaft in the machine, 1 saw shaft to replace) a 22 kW motor is installed, the original 44 kW motor is included was used to cut 60 mm thick planks Technically good condition

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh bread and mares3 piecesNo. 924-10Stainless steel, total length approx. 38 cm see picture for details

A metal band saw is sold. Suitable for someone who has little space available. Dismantling and removal by buyers Pallet truck and a 1.6t forklift on site. Price is 2500 Euro net plus VAT Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Item location 90766 Fürth All information without guarantee

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - .ucymachines/ Contact us at - sales@ucymachines

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh breadAnd mares3 piecesNo. 924-8-HRost-free steelTotal length about 32 cm for details see picture

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh bread and mares3 piecesNo. 924-8Stainless steel, total length approx. 32 cm For details see picture

cutting diameter: 220 mm saw band length: - mm cutting width: - mm total power requirement: 0,7 kW weight of the machine ca.: 0,240 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling a panel sizing saw HOLZMA HPP380/38/38, built in 2008. Cutting surface 3800x3800mm. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5867mm x D.6637mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.0 optimization software included. Very good condition. Available the same.

capacity 90 degrees: round: 115 mm capacity 90 degrees: flat: 100 x 150 mm band saw dimensions: 1638 x 13 x 0,65 mm : 20/29/50 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling a panel sizing saw HOLZMA HPL380/38/22, built in 2007. Cutting surface 3800x2200mm + rear lift table. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5924mm x D.9963mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.1 optimization software included. Very good condition. Available the same.

OMGA Radial RN 450 Radial Saw Cutting width 90° max 450mm Cutting height max 80mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.21kw main motor Saw size 300mm Power supply 220V

TECHNICAL DATA: Table dimensions: 1100 x 760 mm Tilting table Diameter of the flywheels: Ø 800 mm Saw blade length: max. 5650 mm / min. 5550 mm Installed power: 5.5 hp

HOLTEC STIHL ES 121 SHKA Parcel Cross-Cut Saw 2001/2021 With approx. 15m roller conveyor, as good as new! The ES121 F/SHK is the simplest solution for precise end cuts – even from unedged and gap-stacked goods. Cutting with the positionable saw unit They rest parcels to the desired length. This system is also ideal for users with a small footprint. Guide rail swivels hydraulically at a 90° angle around a fixed pivot point Max. cutting accuracy and optimal cutting force distribution with hard chrome-plated pointed tooth chain or carbide-tipped pointed tooth chain from the Home STIHL available HOLTEC guide rail (stellitated on both sides – four-way reversible) ES 121 with roller conveyor and stationary sawing unit – the classic cut for dividing long packages into fixed lengths By means of a movable trolley, the packages are positioned exactly to t ...

Used automatic band saw Sabi PBS250A with CNC Sabi and CE. CNC: Sabi. Cutting capacity round: 250mm. Cutting capacity square: 250x230mm. Cutting speed: 15 to 105m/min. Cutting tape: 3660x27x0,9mm. Power: 2,2Kw. Dimensions: 1980x1650x1430mm. Machine weight: 1250Kgs. CE: Yes.

TECHNICAL DATA: Working area: 1200 x 800 mm 3 flywheels: Ø 600 mm Saw blade length: max. 6970 mm Installed power: 3 kW Cutting height: 630 mm

Semiautomatic band saw Starret ST-4040 with CE. Cutting capacity round: 280mm. Cutting capacity square: 280x280mm. Cutting capacity rectangle: 280x400mm. Angle cut: Yes. Cutting speed: 15 to 120m/min. Cutting tape: 3550x27x0,9mm. Power: 1,5Kw. Dimensions: 1150x1900x1700mm. Machine weight: 735Kgs. CE: Yes.

Key data: 45 °, 2800 mm, 800 mm

Sliding Table Saw Table Saw Circular Saw Carpenter Saw Altendorf Type: F45 Year: 1978 Sliding table length: 280 cm Trimming width/ rip fence approx.: 80 cm Parallelogram Guard with Top Extraction Hood Boom table with cut-to-length stop Miter stop Motor power: 5.5 KW Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. the indicated shipping costs are an approximate price, depending on the distance and unloading option, they may vary. Please inquire. The item offered is offered with differential taxation. The sales price shown is the gross final amount. An invoice with VAT will not be issued.  ...

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

Band Saw Plaintiff HBA 220 BJ 2008

Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 300 mm Cutting height: 10-120 mm Chain width: 300 Motor output: 22 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Carpet width: 320 mm Spindle: Ø 70 mm Saw blade: Ø max. 350 mm Processing height: max. 120 mm Electric height adjustment Feed with 2 speeds (0.6 kW) Installed power: 30 kW EQUIPMENT: 1 cabinet with tools

Wespa band saw. Good used condition. see photos. Blade length max. 4450 mm, blade length min. 4250 mm.

cutting diameter: 440 mm saw band length: 5200 x 1,1 x 34 mm cutting width: 610 x 440 mm cutting speed: m/min total power requirement: 3,7 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,7 x 1,55 x 1,5 m Band saw horizontal - Coolant system - Emergency stop switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eisele Cold Circular Saw, BJ. 1968, Machine No. V19104

1 piece EISELE PSU 450 H metal circular saw Technical data: Saw motor ‐ variable speed by pole switch Gearbox Max. saw blade diameter Ø 450/40 mm, thickness 4 mm (HSS) Clamping cylinder ‐ vertical Long stroke ‐ horizontal Clamping pressure adjustable Operating pressure Mitre cuts Machines ‐ Dimensions W/H/D D=100 x 160 mm D=50 x 8 mm 30 bar. 50 bar. 30°/45°/90°/45°/30° 1000/1860/1330 mm

Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station

Key data: 280 mm

Metora, VMG 280G, automatic feeding, chip conveyor, L-310, W-210, H- 180cm

Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor

Sawblade tiltable: 45 ° Length of the rolling table: 3.300 mm cutting width: 1.200 mm Motor output: 5,5 kW Cutting height: ca. 170 mm Saw blade diameter: 500 mm Speed: 2800/4000/5500 U/min. weight of the machine ca.: 1.500 kg : Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mm cutting diameter: 90 mm stroke: mm turning speeds: 40/80 U/min total power requirement: 1,5 kW weight of the machine ca.: 350 Kg dimensions of the machine ca.: 0,9 x 0,8 x 1,5 m Cold circular saw - Machine light - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Holtec mobile cross-cut saw Type PICCOLO Year of manufacture 2011 CE Cutting length of the sword 1540 mm Suitable for cross-sections of max. 1150 x 1150 mm Motor power 7.6 kW, 14.5 A, 400 V, 50 Hz

roll diameter: 420 mm throat: 420 mm workpiece height: 300 mm table-size: 610 x 610 mm saw band length: 3150 - 3260 mm turning speeds: 12 - 750 m/min total power requirement: kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 2,0 m Band saw with - Ideal welding machine - Grinding machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 46 °, 3000 mm, 1100 mm

MARTIN T73 Automatic Year 2002 Main sawing unit: 5.5 kW Rated current: 15 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 - 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Parallel fence can be lowered manually + suction arm can be moved max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor Top control panel Central lubrication Fixed degree setting on the transverse table (grid) Pull-out support on the transverse table Compressed air supply required Extraction connection: 120 + 100 mm Weight: approx. 1950 kg

Code: 0367 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wooden packaging, furniture, window and door frames, sawmills, and various - CE Standard Blade diameter 500 mm Hole 30 Blade speed 2800 rpm Motor 7,5 Hp Cutting capacity mm 510 Cutting depth mm 145 Manual feed Infeed roller table mm 2000 Outfeed roller table mm 2000 Suction inlet diameter mm 150 Weight kg 350

AUTOMATIC MULTI RIP SAW model SCM M3 second hand machine carpet with integral cast iron elements in excellent condition. general condition of the machine: excellent Technical details : max.height of cut mm.120 max.working width mm.300 minimum length of cut mm.250 max.diameter of blades mm.350 min.diameter of blades mm.200 main motor power Hp 35 feed motor power Hp 1,5 arbor speed rpm 4200 variable carpet advancement speed. from 6 to 45 m/min. net weight kgs.2200 volt. 380/50

Well preserved complete width frame - creel system LINCK type BV. Right-wing machine. Frame width 760 mm, stroke 600 mm, passage height max. 710 mm. Complete with log feeder, creel car with auxiliary car. Splitting wedge with roller conveyor, transverse take-off and model return. Creel with new saw clamps. Countershaft and frame including 132 kW motor with belt drive 310 1/min. Various spare parts can be purchased in a package. Dismantling on your own. Dismantling can be offered completely truck loaded.

saw blade diameter: 450 mm cutting diameter: 150 mm cutting lenght max.: 1000 mm weight of the machine ca.: 1.35 t dimensions of the machine ca.: 2.7 x 1.5 x 1.65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm

Schnittgeschw. 20 - 70 m/min 16 A plug Length 1.85 m Width 0.80 m Height 1.20 m Weight 300 kg Coolant Unit Belt Gears 1 saw blade new Rollable

Wielopiła Brodpol WP 100 Circular saw blade diameter(max) 350mm Maximum spacing of extreme saws 320 mm Smallest cutting thickness 15mm Largest cutting thickness 100mm Maximum pile width 500mm Minimum pile length 550mm Feed speed adjustable on the inverter 26m/min 30kw main motor Net price

Cutting speed 12 - 75 m/min Belt Welding Device 16 A plug Length 0.80 m Width 0.70 m Height 1.60 m Weight 250 kg Work Lamp Tools Saw blade 0.65 mm teeth a/1"

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schnittgeschw. 12 - 750m/min 16 A plug Top towing eye Ideal Strip Welding Device Work Lamp Chip blow-off device Length 1 m Width 0.8 m Height 1.90 m

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 270 mm

16 A plug Saw blade housing right. side replaced by steel plate. Length 0.8 m Width 0.65 m Height 1.40 m Weight 200 kg

As good as new band saw stand EWD, 17° tiltable! Roller diameter 1800 mm. Absolutely as good as new, as it has only been in operation for a very short time. Year of manufacture 2010. 90 kW drive power, with adjustable belt guide. Includes hydraulic system.

0: 3350 mm Working height: bei 90° = 180 mm 0: 45°/90°/45° 0 Cutting height at 45°: 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.