saws used for sale

Key data: 550 mm

Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Pneumatically folding support arms

Code: 0295 Brand: PUTSCH MENICONI Model: SVP 620 - CE Standard Manual vertical panel saw - CE Standard Cutting lenght mm 4200 Cutting height mm 2200 Cutting depth mm 45 Motor power Hp 3 Blade diameter mm 250 Device for cutting of short pieces Overall dimensions: Mounted machine mm 5400 x 1500 x 2950 h Weight kg 900

Band saw Type: HTZ 1100 Pro Manufacturer: Mebor Year: 2020 MLD round timber conveyor Roller conveyor for sawn timber RC M800 L-P Machine in good condition, fully functional Find more here - / Contact us at -

Offer 26053 Technical data: - Saw blade diameter 550 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 350 mm - Cutting area e.g. 90° 110 x 390 mm - or according to diagram - Inward swivel range pneumatic 90 - 45 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Space requirement approx. W 7660 x H 1600 x D 1400 mm - Weight approx. 2100 kg - with: cutting length adjustment + angle adjustment, - Separate control cabinet, cycle spraying device, - Accompanying roller conveyor,

Code: 0297 Brand: COSMEC Model: SM 100 Automatic multi blade saw for wooden boards, sawmills, carpentry workshops, wooden window frames and various Technical data: Conveyor belt width 100 mm Max cutting height 100 mm Min/max sawblade diameter mm 250/300 Hole 60 Motor 20 Hp Blade feed speed 5/30 mt/min Feed motor 1 Hp Non-return protections Conveyor belt lubrication pump Weight kg 1200

Panel Saw Striebig Type: Standard 6220 A/G Machine No. 16178 Year of Make: 1987 Cutting length 5300 mm Cutting height vertical 2200 mm Cutting height horizontal 2100 mm Cutting depth maximum 80 mm Saw blade diameter maximum 300 mm Saw blade diameter minimum 290 mm Saw blade speed 4,750 rpm. Motor power 4.4/5.5 kW Evasive slatted frame Suction nozzle diameter 100 mm With center support rails Support rollers with locking mechanism Moving extraction duct Delivery and installation possible Length 6300 mm x width 1235 mm x total height 2720 mm Room height 2860 mm Weight: approx. 950 kg

Band saw Bäuerle Type BS 70 Passage height max. 490 mm Projection/cutting width 680 mm Motor power 3 kW With stop on saw table Saw blade guide 3-roller guide top and bottom Tilting table Rubber coating on the saw rollers Saw blade rollers diameter 700 mm Saw blade length 5000 mm Dimensions approx. 1300 mm x 800 mm Height 2400 mm Weight approx. 700 kg

Metal band saw MEBA 320 DG semi-automatic hydraulic - Semi-automatic - Hydraulic operation - Infinitely adjustable band saw speed - Mitre cuts possible - Hydraulic clamping of the mitre adjustment - Hydraulically adjustable saw pressure - Fully hydraulic material clamping - Coolant device - Automatic shut-off - Emergency stop - Connection: 400 V - Cutting range: Round material: up to Ø 320 mm

Code: 0133 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wood packaging, furniture, window frames and various - CE Standard Technical data: Blade diameter mm 500 F30 Blade speed rpm 2800 Motor Hp 7,5 Cutting capacity mm 510 Cutting depth mm 145 Manual feed Suction mouth diameter mm 150 Infeed roller table mm 2000 Outfeed roller table mm 2000 Weight kg 350

Band Saw FORTE F320 -Cutting range 90 degrees / Round - 320mm -Cutting Area / Square - 300mm -Cutting area 45 degrees 220x200mm -Cutting speed 20-100 mm/min -Cutting pressure hydraulically adjustable -Material length stop -Motor 1.5 KW -Saw blade dimensions 3660x25x0.9mm -Roller conveyors -Various replacement saw blades Dimensions: LxWxH 2.2x1.2x1.6 meters / Weight 700Kg

Veneer Saw Scheer FM 8 - 3100 Cutting length 3100 mm Stop system with scale Extraction fan Compressed air clamping Use Machine Condition Good Prices: free loading plus VAT

Hacksaw RUCOCO RSR 500-4 -Saw diameter 500mm -Stroke rates 34-48-60-85 strokes /min -Mitre cutting device -Replacement saw blade 850x75mm -Machine feet -Roller conveyor Hjbkn Au Ssvc Dnxo Tsl -Coolant device -Documentation Dimensions: LxWxH 2.2x1.1x1.5 meters / Weight 2750Kg

Key data: 700 mm

Band saw Bäuerle Roll diameter 700 mm APA guides at the top and bottom! Runs great! Guided tours in a first-class condition Used machine Accessories lots of band saw blades

KNUTH VB 510 Metal Band Saw, BJ 2018 Operating voltage:400 V Frequency: 50 Hz Connection: 1.5 kW Table dimensions:600x500 mm Incl. whetstone and sanding belt device Dimensions set-up:1150x700x2000 mm Weight:approx. 400 KG

HOLZMA panel sizing saw HPP 82 with plates heavy-duty loading ex site for sale.

SICAR sliding table machine model SEGA 350, year 2025, CE standards: - 3200mm aluminum carriage - Useful cutting width on parallel guide 1250mm - blade D=350mm, motor KW 5.5 / HP 7.5 - scorer D=120mm, motor KW 0.75 / HP 1 - manual tilting of the blade unit - digital display of the blade group inclination - upper protection with built-in extractor hood Optional Installed: - motorized lifting of the blade unit - Digital reader on the parallel guide - n° 3 digital readers on the bars of the square guide

Key data: 5300 mm, 2200 mm

Panel Saw Holz-Her Type 1211 Machine No. 579-FD82 Cutting length maximum 5300 mm Cutting height maximum 2200 mm Cutting depth maximum 80 mm Motor power 3/4 kW Saw blade diameter 300 mm Swivelling sawing unit Slatted frame automatically evasive Free-standing installation possible Saw frame can be divided in height for transport Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm

SCM M3 multi-blade saw with: - 300mm track in good condition - main motor HP 35, volt 380 - Useful cutting width 300mm - Useful cutting height 120mm - Blade diameters from 200 to 350 mm - Variable feed speed from 6 to 48 m/min - 1.5 HP feed motor - with laser for cutting line visualization

TECHNICAL DATA: Table size: 980 x 750 mm Tilting table Flywheel size: Ø 800 mm Saw blade length: max. 5770 mm / min. 5680 mm Installed power: 4 kW

STROMAB pendulum saw model PS50/F with: – blade diameter 500mm – useful cutting height 145mm – useful cutting length 530mm – motor kw 5.5 / hp 7.5, volt 380 – with 2+2 m roller benches Year 1996, to CE regulations

 Wood Her CUT 6120 heavy-duty precision high-performance panel sizing line Cutting length 3900 mm Cutting depth 3100 mm Saw blade protrusion 82 mm Control CUTCONTROL 2, 17" TFT screen – touch Powerful optimization software CD CUTTING SYSTEM Label Printers 3 air cushion tables 1800 x 600 mm Car. Angle pressure device up to max. 1300 mm Car. Cutting Setup Residual cutting device Cable remote control pneum. Trimming stops Main saw unit 11 kW, saw blade DM 350 mm Scoring Saw Unit 2.2 kW, Saw Blade DM 180 mm Saw carriage feed 0 - 100 m/min infinitely variable Saw carriage return 130 m/min Width stop feed 0 - 100 m/min (EU 0-25 m/min) Width stop feed - return 100 m/min Collets width stop 7 pcs. Compressed air connection capacity 6 bar Extraction connection basic machine 1 x 120 mm Suction connection pressure beam 3 x 120 mm Extraction capacity 3500 m³h Air speed 30 ...

Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with indepe ...

Jrion & Denz longitudinal saw Edging saw longitudinal circular saw Type HMS 15 Cutting length 3400 mm Cutting width 650 mm Cutting height maximum 120 mm Width stop can be adjusted motorically at the touch of a button Saw motor 11 kW Hydraulic pump feed 1.5 kW Saw blade feed speed infinitely variable 1 – 60 m/min. Saw blade return 60 m/min. At full capacity of the maximum cutting height of 120 mm, the maximum cutting length is 3200 mm. Saw blade diameter maximum 450 mm Cutting height for saw blade diameter 400 mm, 105 mm Saw blade bore 30 mm Extraction connection diameter 200 mm was mainly used to cut 80 mm thick planks Saw is activated via footswitch Rated current 23 A, frequency 50 Hz Instruction manual included Saw blades included 2 pieces diameter 400 mm, 4 pieces 450 mm Good, ready-to-use condition Machine Dimensions: 5750 mm x 1700 mm x H 1200 mm

OMS SALVARANI double miter saw model OK 350 SUPER: - useful opening 3200mm - adjustable blades D=350mm - Total power kw 8.3 , volt 380 - year 1995, machine to CE standards

Mayer FH2-3120 veneer saw, fine-cutting saw with joining unit (planing unit) and veneer stop table Robust mechanical engineering from Mayer A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3100mm The sawing unit and joining unit are combined in one unit, so that only one unit has to be moved. Easy to guide sawing unit, runs on linear guides. Rear storage table with penetrating finger stop, adjustable from approx. 2 - 62cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Drive motor saw 1.8kW, milling 1.0kW The motors can be switched on practically on the handle, so they only run when they are needed. HM-tipped fine-cut blade, sharpened Plough head Z4, equipped with new carbide indexable inserts Practical front veneer shelf, pull-out for pla ...

Key data: 500 mm

cut-off saw machine model BOTTENE TE 500 . second hand machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various diam. blade mm. 500 engine power 6.5 Hp max. cutting size mm. 500 x 135(H) total length of machine cm. 507 volt. 380/50

Bäuerle pull saw with support table left/right and stop. 400mm circular saw blade Cutting depth approx. 450mm Year of construction unknown 3KW

Key data: 5200 mm, 2200 mm

STRIEBIG Panel Saw Used machine Wall installation Motor 380 V (50 Hz) 4.4 kW Cutting length 5,200 mm Cutting height 2,200 mm Cutting depth 80 mm Saw blade Ø = 300 mm Revolution: 2,880 rpm. Slatted frame made of wooden strips Suction hose Fold-out center support good condition

Multi-Blade Saw Paul K3 / 800 Working width 800 mm Cutting height 60 mm 1 saw shaft, saw blades are adjustable via extension rings Connected load 23.5 kW Technically good condition

Technical data: Saw blade min. 200mm max 500mm Scoring unit Cutting height for 500 mm saw blade = 170mm Cutting width at rip fence 1050mm Edging carriage length 3800mm Motor 5.5 KW/400Volt Speeds: 2800/4000/5500 rpm Digital ads for: - Rip fence - Saw blade height/protrusion - Saw blade swivel Rip fence adjustable from the operator station via handwheel Hydraulic height and swivel adjustment via foot pedal Wide and narrow extraction hood Weight 1350

Multi-Rip Saw Paul K4G 800 Working width 800 mm Cutting height 100 mm with 2 saw shafts with fixed attachment, saw blades are adjustable via rings (1 saw shaft in the machine, 1 saw shaft to replace) a 22 kW motor is installed, the original 44 kW motor is included was used to cut 60 mm thick planks Technically good condition

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh bread and mares3 piecesNo. 924-10Stainless steel, total length approx. 38 cm see picture for details

A metal band saw is sold. Suitable for someone who has little space available. Dismantling and removal by buyers Pallet truck and a 1.6t forklift on site. Price is 2500 Euro net plus VAT Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Item location 90766 Fürth All information without guarantee

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - / Contact us at -

I sell the horizontal band saw Droste Schärftechnik Viki 750-80, year 2022. Max. working width 750mm. Saw band 80mm Wheel diameter 710mm Main motor power 22kW. Full hydraulics. Band conveyor. PLC control display. Condition very good. Available immediately.

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh breadAnd mares3 piecesNo. 924-8-HRost-free steelTotal length about 32 cm for details see picture

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh bread and mares3 piecesNo. 924-8Stainless steel, total length approx. 32 cm For details see picture

Paoloni S150 sliding table saw Trolley length 1500mm Cutting width on the right side 1410mm Scoring Scoring Shears Cutting height max 90mm Manual adjustment of the saw angle up to 45° Manual lifting and lowering of the saw 5.5kw main motor Saw size max/min 315/250mm Scoring saw size 120mm CE Certificate

IRION trimming circular saw without cross-cut saw system Saw blade Fixe ( singable ) Cut length 6200 mm

IRION Manual Pendulum Saw Adjustment 45° + / - Suction connection Top condition Motor 7.5 KW

HOLTEC STIHL ES 121 SHKA Parcel Cross-Cut Saw 2001/2021 With approx. 15m roller conveyor, as good as new! The ES121 F/SHK is the simplest solution for precise end cuts – even from unedged and gap-stacked goods. Cutting with the positionable saw unit They rest parcels to the desired length. This system is also ideal for users with a small footprint. Guide rail swivels hydraulically at a 90° angle around a fixed pivot point Max. cutting accuracy and optimal cutting force distribution with hard chrome-plated pointed tooth chain or carbide-tipped pointed tooth chain from the Home STIHL available HOLTEC guide rail (stellitated on both sides – four-way reversible) ES 121 with roller conveyor and stationary sawing unit – the classic cut for dividing long packages into fixed lengths By means of a movable trolley, the packages are positioned exactly to t ...

I am selling a panel sizing saw HOLZMA HPP380/38/38, built in 2008. Cutting surface 3800x3800mm. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5867mm x D.6637mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.0 optimization software included. Very good condition. Available the same.

Key data: 90 °, 2000 mm, 1250 mm

Format saw Gazolin with scoring Trimming length 2000mm Motor 5.5 KW Very good condition

I am selling a panel sizing saw HOLZMA HPL380/38/22, built in 2007. Cutting surface 3800x2200mm + rear lift table. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5924mm x D.9963mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.1 optimization software included. Very good condition. Available the same.

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm

Key data: 45 °, 3200 mm

Format Saw Robland Type: Z 3200 Year of construction: 90s Swivel format saw with scoring Diameter saw blade 400 x 30 mm Max. cutting height 125 mm Tilt adjustment 0 – 45° Max. cutting height at 45° 100 mm Saw blade speeds: 3000/4000/5000 rpm. Motor 5.5 kW Scoring diameter 100 x 20 mm Cutting height scoring 0 – 4.5 mm Inclined adjustment of scoring 0 – 45° Speed scoring 7000 rpm. Table size 1530 x 700 mm Table height 840 mm Dimensions of rolling table 400 x 3200 mm Cutting length 3200 mm Cutting width to the right of the saw blade 1380 mm Suction nozzle diameter 120 mm Net weight 1150 kg Packaging dimensions 2270 x 1330 x 1020 mm + 3250 x 450 x 200 mm

OMGA Radial 700 Radial Saw Cutting width 90° max 700mm Cutting height max 110mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.61kw main motor Pneumatic feed of the cutting deck Net price

TECHNICAL DATA: Table dimensions: 1100 x 760 mm Tilting table Diameter of the flywheels: Ø 800 mm Saw blade length: max. 5650 mm / min. 5550 mm Installed power: 5.5 hp

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm Net price

TECHNICAL DATA: Working area: 1200 x 800 mm 3 flywheels: Ø 600 mm Saw blade length: max. 6970 mm Installed power: 3 kW Cutting height: 630 mm