We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,000 used machines on RESALE, but how to find them? Machine Search
used
Sliding table saw Fabr. Samco Model. Formula S2 Year: 1999 with Voritze with table spread with table publisher Motor 5.5 Kw Carriage 3200 mm with motor brake
used
SAC CS40 sliding table saw Year of construction: 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420 mm, Locking mechanism for easy plate loading in any position Steel sliding system Main saw mandrel (30 mm) 45° swivel Electric raising and lowering of the main sheet. Main motor 5.5 kW, self-braking motor Cutting speeds 2,600 - 4,000 and 5,600 rpm Saw blade diameter max. 400 mm Maximum cutting height 130 mm ( 90° ) 100 mm ( 45° ) Rip fence 1,500 mm Scoring saw motor 0.75 kW 120 mm (diameter scoring saw blade - 8,000 rpm scoring unit with external adjustment) Square length stop with stops, Extension table with mitre stop and sliding boom support. 400 V, 50 Hz Weight 820 kg CE, marked
new
Weibert WBBS 555 profi Log band saw The log band saw is intended exclusively for sawing soft, hard, dry and frozen materials, logs or prismatic workpieces. Their length depends on the design of the machine. The material is laid on the supports of the railway path and fastened. The sawing unit is fed manually. Max. trunk diameter 555mm Max. board width 530mm Max. saw blade stroke 540mm Min saw band stroke 20mm Max. cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Impeller-D: 400mm Wheel width: 25mm Saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed. 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-555 Optional: Extension section 2.3m Aspirator Swivel bar
used
Machine No.: 140374 Country of origin: Italy Saw blade Ø mm: up to 350 Feed speed: infinitely variable Cutting areas: see photo of the machine shield Dimensions LxWxH mm: 900x650x1650 Weight approx. kg: 750
used
Band Saw MEBA Blades dimensions: L 4270 mm x H 41 mm x Thickness 1,5 mm Maxi square cutting capacity: Ø 440 mm Flat cutting capacity: 700 x 300 mm Jaws width: 380 mm Jaws height: 300 mm Removable jaws at +/- 45° Auto blade descent with hydraulic advance Blade speed adjustment: mechanical variator Delivered with 2 feed tables Lubricant pump Voltage: 380 V Length: 2700 mm Width: 1300 mm Height in closed position: 1500 mm Weight: approx 1,2 T
used
Multisaw SCM M2 cutting width 220 mm cutting height 120 mm Motor power: 18.5 kW Saw hole diameter 70mm Maximum saw size 350mm Feed regulated on variator Feed speed adjustable in the range of 6-48m / min Anti-jet ratchets Central track lubrication Machine weight: 1450kg
used
Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900
used
Petzing & Hartmann / Pehaka US 5 - N, vertical band saw Two-stage band saw motor Stage 1 speed 15 - 220 rpm (infinitely variable Stage 2 Speed 150 - 2200 rpm (infinitely variable) Work table 750x700mm with stop Work table swivel / tilt Passage - column / band saw 510mm Swxmlk Saw passage (height) approx. 420mm Ideal - strip welding device Emergency/ Off Speed indicator Saw blade - length 4100x3-20mm Dimensions: LxWxH 1.4x1x2.3 meters Weight 450Kg
used
-Exhibition machine-Double trolley swivel one. Height and swivel adjustment Rip fence with man. Fine adjustment angle mitre stop Extraction hood large Vorritzer Basic with LED lighting---------- Technical data ---------- swivel range: 0 - 46 Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm max. saw blade : 315 mm Cut-to-length stop extendable to: 3,450 mm Speeds: 3,600 / 4,200 rpm Engine power: 5.5 kW (7.5 hp) Working table height: 880 mm Suction nozzle : 120 + 80 mm ; new exhibition machine
used
Country of origin: Italy Saw blade Ø mm: 425 Weight approx. kg: 900
used
Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900
new
Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with 1 ...
new
Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the end of the carriage. Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 3 ...
used
I sell here several machines, equipment, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts. Therefore, be sure to check out my other auctions Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw ROBLAND Type: Z320 Alu format slide 320 cm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 285cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence up to 130cm 3 different speeds adjustable (4000/ 5000/ 6000rpm) Motor power main engine 5.5 KW Motor power scoring 0.55 KW Prior viewing is expressly desired, just leave your phone number by e-mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The machines can be picked ...
used
Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170
used
Multi-blade saw Manufacturer: Raimann Model No.: KS230 Year of construction: 1992 Chain width: 250mm Cutting height: 105 / 120 mm
used
Circular saw Frommia 630 Length 1.20 m Width 1 m Height 1 m Attack Roller table Saw blade
used
Cross-cut saw Dewalt 220 V The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition
used
Double mitre saw Omga for glazing beads Ready for pickup, price EXW The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Multi-blade saw Cosmec SM 100 Machine No. 2632 Year: 1994 Production COSMEC Italy 22kW (30HP) 380V, 40 Hz Variable speed 5/30 m/min Saw blade min/max 250/300mm Max. cutting depth 100mm Width feed belt/transport chain 250mm Max. distance between 2 saw blades 230mm Minimum workpiece length 600mm Dimensions: 1650x1400x1300 Weight 1300kg
used
Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking
used
Band saw JAESPA AS8 Blade length 5300 - 5500 mm Width 34 mm 16 A 380 V Length 1.50 m Width 1 m Height 2.50 m Tiltable table Speed indicator
used
Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice
used
Double mitre saw Hoffmann type MS 35 Specifications: Cutting width (mm): 85 Cutting height (mm): 85 Motor (kW): 2 x 2,2 Horizontal clamp: 1 set Material supports: 1 set
used
Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm Positioning control E 255 with cycles Digital angle display on both units for swivel and tilt Ride-on roller conveyor Minimum quantity spraying device Weight: 2000 kg
used
with 7?- touch screen - exhibition machine - new exhibition machine
used
PAOLONI circular squaring saw model P320: - 3200mm aluminum trolley - motorized lifting of the blade group - manual inclination of the blade group - engraver with independent motor and external adjustments - useful width on parallel rail about 1400mm - protection suspended on the blade - installed power kw 6,25, volt 380 Machine according to CE standards
used
fully automatic cross-cut system with additional barcode recognition LUT system for error cutting Inlet conveyor 6 m 6 ejection stations
used
Jet JMS-8 Cross-cut saw Demonstration machine D210mm x 2,8 x D16mm 220V 1200 Watt P1 Saw blade speed of 4500 rpm. Saw blade diameter 210/16mm Swivel range of 46°/46° Index possibilities every 5° and 22.5° Saw blade swivel 0-45° Cutting depth 90°/45° 60/25mm Cutting length 90°/45° 120/80mm Weight of 9.5 kg G&JET-10000818M Special price: net 99,-€
used
Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT
used
Double mitre saw STRIFFLER-STRIMA 2750 Year of construction: 1992 S/N 289 Manufacturer: Striffler GmbH Germany Cutting width 2,200 mm Cutting height at 45° 240 mm 2 saw motors 1.1 kW, 2800RPM / 380 V 50 Hz Saw blade 250mm Rear-cutting design Width adjustment by electromotive Saw feed pneumatic Length adjustment by handwheel Pneumatic clamping device Length 2940 mm Width 1,100 mm Height 1,220 mm Weight approx. 360 kg
used
SPECIFICATIONS: Working range mm: min 220 - max 1200 Saw blade diameter mm: 350 Bore mm: 30 2 motors, 1.5 KW each Vertical and horizontal saw blade inclination 35° With drawer for accessories
used
SPECIFICATIONS: 2 saw blades Ø 250 mm (2.2 Kw each) 2 saw blades Ø 350 mm (2.2 Kw each) Speed: 3800 rpm Machinable length: min. 200 mm-max. 1200 mm With chip transport carpet
used
Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm
used
- Self-supporting, firmly welded, torsion-resistant saw frame with hardened guides - TRK2 Automatically evasive aluminium slatted frame with plastic pads - 17-fold roller support with 3 brake pedals - 5.15 m long, split center support - Stable, durable saw bar construction - Powerful, powerful engine - Supersilent system to dampen engine noise - Electromagnetic motor brake - Cutting area 5300 x 2240 x 80 mm Incl. small parts support made of wood over the entire length of the machine and set for free-standing assembly
used
Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm Min. material length 800 mm .max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg
used
SPECIFICATIONS: Flywheel diameter mm: 900 Installed power KW: 7.5 Voltage: 380V Min. saw blade length mm: 6060 Max. saw blade length mm: 6260
used
Radial saw MAGH-OMGA RADIAL 700, engine hp 3 , reach 700mm Not to CE standards, for export
used
OMS double miter saw SALVARANI model OK 350 SUPER: - useful opening 3500mm - adjustable blades D=350mm - machine according to CE standards
new
Band saw, model 320, year 2023 / new machine
used
Vertical trend and slit band saw Trenband saw Fabr. Raimann Type B 11 built in 1983 Roller diameter 110 mm Roll width 100 mm Speed -580 rpm Motor 18.5 Kw Cutting width R/L of sheet 200 mm each Cutting height 200 mm Feed rate infinitely variable 10-40 m/min 1.5 kw Length of band saw blades 6300-6500 mm Electro-motorized blade cutting Pneumatic roller carriage adjustment
used
Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies
new
Weibert FO-3 Sliding table saw Format sliding table: 2000mm Motor power: 400V 3 KW 400V Cutting height: 103mm Saw blade: swivelling, D= 315mm with boom cpl. WJ-100100
new
Weibert FO-3 Sliding table saw Format sliding table: 1600mm Motor power: 400V 3 KW 400V Cutting height: 103mm Saw blade: swivelling, D= 315mm with cut-to-length stop cpl. WJ-110100 Special price: net 3353,-€ with VAT 3990,-€
used
Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - wi ...
used
WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg
used
ORDER NO. 6905 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 315mm - max cutting height 80mm - main dial adjustable up / down + angle - spindle diameter 30mm - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1050mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring disc electrically adjustable up / down - scoring motor 0,75kW - main engine 4kW - diameter of extraction connection 120mm, 50mm - table top dimensions 1230x730mm - table top dimension with extension and extension 1780x1230mm - shield cover - dimensions length / width / height 3030x3120x1170mm - weight 946kg – German production – with undercutter – unpainted – used saw, very good condition Net price: 23900 PLN Net price: 5371 EUR depending on the p ...
used
CATALOGUE NO. 7015 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 350mm - max cutting height 100mm - main dial adjustable up / down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1030mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring motor 0,75kW - main motor 5,5kW - 4 types of rotation speeds 3000, 4000, 5000, 6000, rpm - diameter of extraction connection 120mm, 60mm - table top dimensions 1220x730mm - table top dimension with widening 1220x1150mm - shield cover - dimensions length / width / height 2880x2800x1100mm, - weight 961kg – German production – unpainted – used saw, very good condition Net price: 16900 PLN Net price: 3798 EUR depending on the price 4.45 EU ...
used
SPECIFICATIONS: Sliding carriage: 360 x 3200 mm Saw blade: Ø 350 mm Scoring: Ø 100 mm Installed power: 5.5 Kw Cutting width of the parallel guide: 1300 mm