sawing machine used for sale

sawing cap rectangular: 400 x 200 mm sawing cap square: 280 x 280 mm sawing cap round: dia 300 mm Depth of throat: 400 mm Max height of workpiece: 280 mm Length of band saw: 3010 x 27 x 0,9 mm Weight: 530 kg

- technically efficient, ready to work - after full service - pneumatic clamps - cooling installation - disc diameter: 400 mm

Approx. Onsite Dimension. (l x w x h): 1,400 x 1,200 x 1,900 mm, weight approx.: 1,000 kg

Description: Including roller conveyor  , Attention: without visible material Approx. Onsite Dimension. (l x w x h): 5,000 x 1,900 x 2,200 mm, weight approx.: 3,000 kg

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

PLC – controlled high-performance precision cold-circuit sawing machine with very high quality loading magazine – equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of steel and stainless steel rods – high-strength alloys – forged materials and similar materials and similar materials Saw blade dimensions 460 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 150 mm or 130 x 130 mm - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits the material loss, saw blade speeds 60 to 130 rpm, controlled unloading slide for two different unloading positions, largest bar length in the loading magazine 6,000 mm, maximum material weight in the loading magazine 3,000 kg, largest material feed per fee ...

Pruning saw for removing defects from wood TechnologieCNC Optimizer CROSS CUT 306 4000mm Description/name of the machine: Sawing saw for removing defects from wood Manufacturer: TechnologieCNC Model: CROSS CUT 306 4000mm Optimizer Year of production: 2023 CROSS CUT 306 Optimizer 4000mm Saw 4 Meter Feeder A professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of woodworking machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs a transverse cut of the material into sections of a certain length with the elimination of material defects marked with a fluorescent crayon and with the help of a s ...

Machine Type: NC Circular Saw Machine Manufacturer: Behringer Eisele Type: VA-2-NC-HM Year of construction: 2002 Condition: used / currently Hydraulics defective Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-BEH-1123 DESCRIPTION We offer you a used NC circular sawing machine from the manufacturer Behringer Eisele. Technical data will follow. - Roller conveyor feed and discharge side - Chip conveyors and chip trolleys - 12 saw blades / mostly new -Operating instructions Can be repaired if necessary. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and condition ...

CNC – controlled double miter precision circular sawing machine of very high quality, designed for demanding metal construction, which requires a rational and precise cutting. Miter adjustment range infinitely variable - 90° / + 90°, cutting range 0° - 240 x H 85 mm or 125 x 125 mm or 140 mm / 45° - 150 x H 100 mm or 120 x 120 mm or 140 mm - 60° - 130 x H 80 mm or 120 x 120 mm or 130 mm, Saw band drive power 7.5 kW - saw blade speeds 13/26 - 17/34 - 52/104 - 74/148 - 105/210 m/min - saw blade diameter 425 mm, saw table height 1,000 mm, largest material feed per stroke 1,500 mm - drive by ball roller spindle CNC control with touchscreen and color graphics - software for automatic pushing and pulling the profile rod - extremely easy programming and operation - cut lists can be loaded as an Excel file, dimensions 1.2 x 2.1 m x H 1.9 m, weight 1,250 kg

PLC – controlled high-performance precision cold-circuit sawing machine with loading magazine and unloading magazine of very high quality - equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of rod material – tubes and hollow profiles made of steel and stainless steel Saw blade dimensions up to a maximum of 315 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 12 mm to 80 mm tubes and hollow profiles - 12 mm to 40 mm solid material - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits material loss, saw blade speeds 20 to 130 rpm - optionally available with different saw blade speeds, controlled unloading unit for four different unloading positions - largest automatically unloadable sectio ...

Circular sawing machine. unfortunately no technical data.

Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.

Code 96380 UMSCHREIBUNG Volautomatische Kaltkreissäge Fabrikat Kaltenbach Model KKS 400 NA Machine Nummer 1700 - 03004 Baujahr 1982 Rechtwinkeler Schnitt Rund à 90º 130 mm Viereckig à 90º 315 x 50 mm U-profiel à 90º 24 x 85 mm Sägeblatt Durchmesser..………………… 400 mm Sägeblatt in Graden verstellbar 0 – 180 º Drehzahlen 10 – 14 – 20 UpM Hauptmotor Leistung…………………… 0,9 – 1,2 – 1,8 PS Anschluss spannung……………………. 380 Volts Zubehör Lademagazin Automatische laden bis 1700 mm Maschine Maschine ist in gutem Zustand

work piece width: 200 mm workpiece height: 100 mm bore diameter: 10 / 20 mm saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm Capacity 90° rectangular: 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm total power requirement: 1,9 kW weight of the machine ca.: 260 t dimensions of the machine ca.: 1400 x 850x 970 m Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for thi ...

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

High-quality PLC – controlled automatic 90° under-table – straight-cut circular saw machine, for the rational cutting of profiles made of aluminium – non-ferrous metals – plastics – wood and other soft materials Smallest possible section length 5 mm Largest stroke of the feed clamping stick 620 mm (feed length unlimited) Infinitely adjustable feed speed Feed accuracy +/- 0.2 mm Horizontal and vertical material tension Largest saw blade diameter 450 mm Cutting area - - 300 mm x H 50 mm - 260 mm x H 98 mm - 240 mm x H 100 mm (see the figure with the section diagram) Saw blade speed 2,800 rpm Saw blade drive power 2.2 kW Dimensions approx. 1.5 x 0.9 m x H 1.36 m Weight approx. 440 kg

Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg

very stable automatic with protective lock and max. 275 saw blade

– year of production 1998 –optimization – cutting to the line – width measurement – possibility of cutting aluminum TECHNICAL PARAMETERS: .max. cutting length 4000 mm Min. element 200 mm .max. cutting height 100 mm .max. cutting width 260 mm disc diameter 500 mm engine power 9 kW feed speed max. 160 m/min acceleration 2 m/s2 optimization in relation to length and value pneumatic material pressure three ejectors drop tables rotary table total length 2000 cm transport dimensions (L/W/H) 1300 / 245 / 220 cm weight 3500 kg

– Italian production – year of manufacture 2009 – full optimization –DTR –CE TECHNICAL PARAMETERS: cutting width max. 260 mm cutting height max. 120 mm engine power 7,5 kW material length max. 4000 mm receiving table 3000 mm disc diameter 500 mm feed speed 60 m/min possibility to program 100 dimensions of cuts programming of 5 classes of wood automatic and semi-automatic operating mode total dimension (L/W/H) 930 / 150 / 170 cm

– after technical inspection – German production – year of manufacture 2005 TECHNICAL PARAMETERS: .max. length of cut material 4500 mm .max. width 360 mm .max. height 160 mm automatic length measurement optimization in 4 quality classes total power 13 kW disc motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500 mm OptiCom Assist control receiving conveyor 5600 mm two ejectors overall length 13 m printer for marking elements cutting accuracy +/- 0.5 mm transport dimensions (L/W/H) 600 / 240 / 190 cm weight ~ 1800 kg

– after technical inspection – year of manufacture 2004 – declaration of conformity, DTR – German production TECHNICAL PARAMETERS: min./max. element input length 800 / 3500 mm .max. input width of the element 200 mm min./max. element input thickness 12 / 80 mm type of hard/soft wood cutting to the line wood classification .max. feed speed 120 m/min acceleration 5 m/s saw diameter fi 500 mm saw bore diameter 30 mm number of spindle revolutions of the saw 4600 U/min duration of 1 cycle 0.7 - 1.2 sec driven transporter at the entrance and marking station with side tables for two marking belt conveyor total power 15 kW length measurement – fluorescent camera for 3 quality receiving station – conveyor belt total length 8300 mm connection diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

– German production, instruction manual – year of manufacture 2008 – automatic material collection TECHNICAL PARAMETERS: cutting length max. 4200 mm cutting width max. 800 mm cutting height max. 130 mm feed smoothly adjustable up to 80 m/min main engine power 11 kW disc diameter max. /Min. 600 mm / 400 mm possibility to program 100 dimensions line laser two-stage blade feed touch panel control connection diameter 2 x 160 mm machine dimensions (L/W/H) 620 / 160 / 220 cm weight 2250 kg

– Polish production – DTR, CE – year of manufacture 2011 TECHNICAL PARAMETERS: minimum length of material after formatting 800 mm maximum length of material after formatting 1600 mm maximum material width 480 mm maximum material thickness 145 mm disc diameter 500 mm smoothly adjustable feed 0-20 m/min main motor power 2 x 5,2 kW feed motor power 1.5 kW machine dimensions (L/W/H) 340 / 230 / 180 cm weight 2500 kg

Three-saw format saw – solid construction TECHNICAL PARAMETERS: .max. cutting width 3050 mm Min. cutting width 450 mm .max. cutting height 100 mm Blade diameter 450 mm motor power 3 x 4 kW feed motor power 1.5 kW Receiving conveyor sawdust 6200 mm material pressure transport dimensions (length / width / height) 620 / 200 / 120 cm weight ~ 800 kg

Dimter Opticut 302 Optimizer Cutting out errors and fixed lengths The machine after a comprehensive overhaul in 2019 Year of Build 2000

Key data: 520

Sensational DIMTER optimizer OPTICUT 200 ELIT Machine from the production line, Complete machine, to it we will give a set of inlet tables, as well as a complete outlet. Measuring station, everything included Machine not running. Connect electronically and pneumatically, run the program At the customer's request, we can arrange it for a fee. Machine after mechanical overhaul in our plant If you have any questions, feel free

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

Inv. Num. : 6503 Type: ALU-U12 Producer: KASTO Generated: 2015 Parameters: Maximum sawing speed: 2800 1/min Spindle power: 1.5 kW Machine dimensions: 650 x 800 x 1300 mm Machine weight: 150 kg Equipment: Saw blade

Omga T 2020 NC Optimizer Maximum element thickness 120mm Maximum element width 320mm Minimum element length 600mm Maximum feed speed 180m/min Saw motor power 5.5kw Feed motor power 7.5kw Maximum acceleration 15m/s Saw cutting cycle time 0.2-1sec Average number of cuts 80-90/min

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drill ...

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - wood - aluminum - bronze - GRP (glass fiber reinforced plastics) - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind hole ...

Key data: 600 mm, 230 mm

Stock number: 3831 ALUMINUM SHORTCUT SAW Manufacturer: TRONZADORAS MG, Type: TL 600-90 Machine NO.: 220309, Year of manufacture: 2022 Specifications: Large sawing capacity 230 mm Ø Large sawing capacity 210 x 210 mm 4-ct. Large blade diameter 600 mm Blade speeds 3000 rpm Accessories: Automatic feed. Pusher Autopos 6 Pinon 6000 mm max. 40kg/m Chip suction MG 570 4Kw Length: 1300 mm + 6700 mm, height: 1660 mm, width: 813 mm, weight: 450 kg

Automatische nachschnittsaege,saummeranlage Mohringer 3 bewegischesaege steuerung microtec baujahr 2009 komplete anlage

Cold Circular Saw Circular Saw Metal Saw with Roller Conveyor Kaltenbach KKS 400 E Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.

100 % before loading warranty: none

Optymalizerka Metal Technika OWD 1600 - produkcji Polskiej - rok produkcji 2017 PARAMETRY TECHNICZNE: - szerokość cięcia 250 mm - wysokość cięcia 120 mm - Wydajność Od 3 200 do 8 150 mb /8 h - stół sortujący z 5-ma wybijakami - Elektronika Sterownik z wyświetlaczem dotykowym kolorowym „MITSHUBISHI” - Funkcje - pełna optymalizacja 30 wymiarów w dwóch klasach jakości, - tworzenie programów cięcia dla różnych klientów, - ciecie w miejscu zaznaczenia kredką fluoroscencyjną, - obcinanie marginesu (początek i koniec materiału wejściowego) - cięcie pakietami (kilka elementów na raz) - liczniki metrów, total, zmiany, operatora, miesięczny, - dokładność cięcia ±0,2 mm - Silnik 5,5 KW (piła Ø500 – 140z) - Szerokość mat. wejściowego 12 - 250 mm max. szer/wys ( 250 / 50 mm) - Wysokość mat. wejściowego 12 - 120 mm max. wys/sze ...

Description: Max. rotational speed 5000 rpm Serial number 4-21978 without further accessories Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 8 kg

Description: max. drive speed 10000 rpm max. output speed 15000 rpm max. torque 20 Nm Permissible operating temperature 85° C without further accessories Approx. Onsite Dimension. (l x w x h): 150 x 100 x 250 mm, weight approx.: 6 kg

Description: BENZ Single sided angle head MONO R Sawing and Snipping Unit Type of aggregate: Single sided angle head with reduced RPM type MONO R Product Line: Classic Line (grease lubrication) Tool outlet: 1x saw blade alignment Ø30 mm (fixation with flange by 2 pins Ø6 mm on pitch diameter 42 mm or by four M5-screws on pitch diameter 45/52 mm without using the flange) Weight 5.5 kg max. drive torque M2 25 Nm max. drive speed n2 8000 1/min Transmission ratio (n1:n2) 1:0.8 The price is only valid for aggregates with standard interface with HSK-F63 interface and the torque supports for the following machines: Biesse, Busellato, Felder, Hiteco, HOMAG, IMA, Masterwood, Reichenbacher, SCM 1 point, SCM 3 point, Weinig. Further torque supports on request. The unit can be delivered with different machine connections. After the purchase please let us know which machine connection / torque  ...

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 105.5 mm   wall thickness min.: 0.8 mm   length min.: 3000 mm   lenght max.: 12500 mm PRODUCT (PROFILE, TUBE)   length min.: 7 mm   lenght max.: 2000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 100 kVA   mains voltage: 400 V   mains frequency: 50 Hz Internal ID: Fix 17 / Rattunde 2 Rattunde ACS 105/2/BM+CFMcurve+SCB+SRTH+CC+Pi + CFMcurve end machining on both sides with automatic adjustment Tools are not included in the scope of delivery.

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 105 mm   length min.: 3000 mm   lenght max.: 12500 mm ELECTRICAL SPECIFICATIONS   mains power supply: 200 kVA   mains voltage: 400 V   mains frequency: 50 Hz Internl ID: Fix 18 / Rattunde 3 Rattunde ACS 105/2/BM+CFMcurve+WDM+SCB+SRTH+CC+Pi + CFMcurve end machining on both sides with automatic adjustment - machine is being sold WITHOUT washing system Tools are not included in the scope of delivery.

CONTROLS    SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 105.5 mm   wall thickness min.: 0.8 mm   length min.: 3000 mm   lenght max.: 12500 mm PRODUCT (PROFILE, TUBE)   length min.: 7 mm   lenght max.: 2000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 100 kVA   mains voltage: 400 V   mains frequency: 50 Hz Internal ID: Fix 21/Rattunde 5 Rattunde ACS 105/2/BM+CFM+SCB+SRT+CC+Pi + Chamfering Machine CFM (chamfering on both sides) with automatic adjustment max. weight of finished part: 25 kg/piece Tools are not included in the scope of delivery.

CONTROLS    SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 105 mm   wall thickness min.: 0.8 mm   length min.: 3000 mm   lenght max.: 12500 mm PRODUCT (PROFILE, TUBE)   length min.: 20 mm   lenght max.: 2000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 100 kVA   mains voltage: 400 V   mains frequency: 50 Hz Internal ID: FIX23/Rattunde7 Rattunde ACS 102/2/BM+CFMcurve+SCB+SRT+PI + CFMcurve end machining on both sides with automatic adjustment Performance data (actual production):+ 2500 pcs/h (sawing only)+ 1800 pcs/h (with chamfering CFM) Exclusions from supply (even when visible on photos):- the equipment is sold without crate roller table Tools are not included in the scope of delivery.

CONTROLS   PLC SIEMENS S7 300 FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 105.5 mm   length min.: 3000 mm   lenght max.: 12500 mm PRODUCT (PROFILE, TUBE)   length min.: 20 mm   lenght max.: 2000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 100 kVA   mains voltage: 400 V   mains frequency: 50 Hz Internal ID Number: FIX16/Rattunde1 Rattunde ACS 102/2/BM+CFM+SCB+SRT+PI System consist of: + Saw ACS 102+ Chamfering Machine CFM (chamfering on both sides) with automatic adjustment+ Chip Blow-Out (Pneumatic Cleaning)+ Measuring Station+ Step Conveyor Bridge SCB + Stacking robot for automatic workpiece stackingmax. weight of raw material: 230 kg/piecemax. weight of finished part: 25 kg/piece Tools are not included in the scope of delivery.

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack