sawing machine used for sale

Balestrini linear milling machine two milling units pneumatic pressure of elements

Two extra sharpening stones, wo soft stone for hard metal.

1 piece 220.30-9315-125 with diameter 315 mm/ 1 piece 220.48-8315-09205 with diameter 160 mm/ 1 piece 220.48-8315-09205 with diameter 315 mm/ unused and i original packaging/ including pallet box

Jaw width: 160 mm Reference: CES - Lot 28

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Profile bending machine with: - Foot pedal right/counterclockwise rotation - 1 set of standard rollers - All 2 rollers are driven - Working horizontally or vertically Round material solid 35 (800) mm Square material solid 35 (1200) mm Angle steel 50 x 50 x5 (850) mm Flat steel 60 x 10 (800) mm Axle diameter 50 mm Working speed 4.5 m/min Roller diameter - tools 155 mm Total power requirement 1.5 kW Machine weight approx. 0.9 kg Space requirement approx. 0.6 x 0.9 x 1.35 m

1 of used stretch-wrapper, make Lantech, type Q 600, new 2007. Siemens S7 controls. With turntable. Capacity upto 45 loads/hour. Min load size 91.4 x 91.4 x 61 cms, max load size 137 x 122 x 233 cms. Max load weight 1.800 kgs.Dismantled and ready for shipment. Excellent condition!

Make : Trepko Filling Machine Cup Type : Split Cup Filling : Cereals and Yoghurt Condition : Good Pick and Place device for cup in Trays

Serial number: 46270311 Travel X-axis: approx. 550 mm Travel Y-axis: approx. 500 mm Travel Z-axis: approx. 300 mm incl. granite measuring plate Plate dimensions: 880 x 830 x 160 mm incl. measuring rings and documentation Reference: Hercegfi - Lot 91

Unused

Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg

Electro-hydraulic mandrel tube bending machine with - Bending mandrels for 18mm pipe - Tools for : 8mm, 10mm, 12mm, and 18mm. - PC interface - Laptop - Documentation For more accessories see pictures Tube diameter 4 - 28 mm Mandrel length 3000 mm Bending radius max. 90° Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.75 t Dimensions approx. 3.7 x 1.2 x 1.5 m

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Notching machine - Footswitch - Emergency stop Sheet thickness 6 mm Pressure 18 t Blade length 220 mm Angle adjustable from - to 90 degrees Table surface 1100 x 950 mm Bending length 835 mm Machine weight approx. 1.1 t Dimensions L x W x H 1.2 x 0.8 x 1.4 m

Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional

Jaw width: 160 mm Reference: Osthoff - Lot 45

- Mitutoyo Crysta-Apex C544 CNC coordinate measuring machine - Year of construction 2003 - Equipped with Renishaw measuring system (PH6, TP200, PI200, SCR200) - Incl. software MCOSMOS (dongle) and calibration ball - Use only in schools, low operating hours - Currently defective, without function - Error message "E949", does not drive in reference position - Suspected defect on the servo or motherboard - Sale as a spare parts carrier or for repair

Production number: 1154 Operating voltage: 220/380 V Frequency: 50 Hz Connection: 2.5 kW Rated current: 10 A

16 x different HSK63A mounts Collets, shrinkage;

Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

Jaw width: 125 mm Reference: Schönichen - Lot 21

Sheet metal roller for the vice. Maximum working width 300 mm. Maximum rolling capacity 2.5 mm. Diameter of the rollers 32 mm. Condition: never used / new (5)

MIG/MAG welding machine with: Hose package Ground cable Set of welding nozzles Welding current max. 200 A Open circuit voltage 14 - 24 V Connection voltage 230 V Weight 25 kg Dimensions LxWxH 500 x 200 x 300 mm Welding wire not included Condition: never used / new (5)

Spiral kneader Diosna W 240 A with 2 boilers Diosna spiral kneader W 240 A in good used condition with stainless steel spiral.The kneader is suitable for industrial and craft bakeries. The kneader and the boilers are driven by gear. -for max. 240 kg dough or for max. 150 kg flour -Stainless steel spiral kneader -digital control -Boiler inlet with pliers locking -with Siemens touch panel control -robust machine -more pictures and information on request -Shipping and trade-in on request -Machine can be viewed and tested in our warehouse

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

Keksmaschine gebrauchte

Sollas Bandum 25, untested, as spare part donor

Including clamping tools, drills, inserts, tools, in 1 cabinet (700x730x1040)

Unused

Jaw width: 125 mm Reference: Schönichen - Lot 24

Machine number: 15212 Speed: 125 to 3000 rpm Drilling depth: 160 mm Table dimensions: 400 x 300 mm with two grooves

Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.

Grinding machine XXIII DH3 ready for use from site in actual condition

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused

Various types and sizes.

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

4000 x 2000mm 6000w with auto pallet changer

Dimensions 600x500x250 mm

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Defective