saw sharpening machine used for sale

Mitre cold circular saw BERG & SCHMID type MKS 350Year of construction approx. 1980Saw range at 90 Around 110 mmSaw area at 90 Rectangle 160 x 90 mmSaw area at 90 Square 95 x 95 mmSaw area at 45 Round 95 mmSaw area at 45 Rectangle 120 x 90 mmSaw area at 45 Square 80 x 80 mmSaw blade diameter max. 350 mmSaw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchableMains connection 380 volts, 50 Hz- motor with 2 electrically switchable speeds- infinitely variable

Auction-ID: A1-40112-143

On a pallet. Auction-ID: A1-47074-14

Vertical band saw HESKA type ESA 4Fabr. No. 681174 year of construction approx. 1985Roller diameter 420 mmThroat depth 400 mmTable size 500 x 500 mmCutting height 285 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed Gear stage (1) 15-140 m/min. Saw blade speed gear stage (2) 150-1400 m/min. Motor power 1.5 kWNet connection 380 volts, 50 Hz - stepless saw blade speed via PIV gearbox with handwheel adjustment and 2 gear steps - saw table swivel in 2 axes -

Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2

Vertical band saw JAESPA type MSU 4Fabr. No. 724749 year of construction approx. 1980Roller diameter 420 mmProjection 400 mmTable size 610 x 610 mmCutting height 260 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed 10-1500 m/min. infinitely variableMains connection 400 volts, 50 Hz- infinitely variable saw blade speed via 2 gear stages and infinitely variable via belt drive- Saw table swivel- Saw blade butt welding machine IDEAL BS0-16- Saw blade shear- Sharpening stone for grinding the weld seamSpace requirement L x W

Saw unit, sawing unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit cutting depth 60 mm -Saw blade: Ø 250 mm -Engine: Fimec H71SE -Power: 3 kW -Speed: 2800 rpm -Transport dimensions: 455/455/H420 mm -Weight: 27 kg

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

Type: Vertical band saw Electrical supply: 380V 3F 50 Hz Auction-ID: A7-46477-7

Dry masonry saw iQMS362 with integr. Dust extraction #190135 used with protective cover Auction-ID: A7-47086-52

Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;

Working width: 600 mm; Working height: 5mm to 300mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex, diameter 210mm; Height adjustment: electric; Altitude display: digital; Feed speed: 4 - 14 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 700kg;

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm;

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Standard equipment Manual heavy duty band saw machine with hydraulic Sawframe reduction for miter cuts from 45 ° left to right 65° Saw frame made of sturdy cast iron construction Massive round table Oil bath gearbox consisting of bronze wheel with hardened and ground steel worm Carbide Guide and adjustable roller bearings Quick clamping Vice with additional quick adjustment and quick release lever Electric high-performance Coolant pump Mechanical blade tension with electric blade monitoring Control tool Free delivery including packaging

OVERHAULED IN 1997, SAW BLADE DIA.: 1000 MM, DRIVE PIN HOLES: 4 x 30/200 MM; ROUND MATERIAL DIA.: 360 MM, SQUARE: 330 MM; FLAT PROFILES: 600 x 260 MM, 6 STEPS OF SPEEDS,

Separating hunters dry Rapitsäge ideal for fast separations. Area depth up to 450 mm height up to 130 mm. Optimally adaptable through integrated hydraulic adjustment. Sawn is using large foot pedal (hands are free), cuts like a compound miter saw. Dimensions: Brteite 1000 amount 1400 1400 depth weight approx. 410kg. 7, 5kW motor 3000 rpm Fully functional! Well received, signs of wear present. 1 saw blade to the machine (on 2 PCs.) ask here in resale 0170 / 2204056 or fa.raupp@t-online

WEIBERT WJ-K315R Circular sawing machines Formatschiebetisch: 2700mm Engine power: 4 KW (5.5 HP), 400V, n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° Before scoring unit: With motor WJ-S315R-4KW 2.7 SPECIAL PRICE

Engine power: 400V 3 KW 4 HP, 2 engines Formatschiebetisch: 1500mm Cutting height: 103 mm Blade: swivel, max. 315 mm Milling cutter: starr 90° Blower rpm: Rpm: 1500/3500/6000/8000 RPM. WJ-400100 K NET 2990,-new

Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...

Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condition without function. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Amon ...

Refurbished: 2018 PLC: Siemens S7 Saw blade 550 mm Engine power 11 KW Saw blade feed 0-3000 mm / min Cutting speed (SB 500 mm): 4500 m / min (SB 550 mm): 5100 m / min Square maximum work area: 170 x 170 mm Flat maximum work area: 380 x 75 mm Round maximum work area: 165 mm Supply length 10-1000 mm Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) about: 2800mm x 1600mm x 2200mm (Magazine) about: 3300 x 2200mm x 1800mm Footprint Lxw 6100 mm x 2200 mm The machine was overhauled 2014 in our House. Among others were renewed following points: -New PLC control -New Elgo positioning system -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Overhaul Menzel minimal lubrication system -Replacing common wear parts -Overhaul of t ...

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

Saw blades: Carbide / HSS, 450 mm Power: saw motor, 4,0 / 5,5 KW Speed: stepless, 10 - 60 min-1 Cutting speed: Blade (450 mm), 7-43, or 15-75 m / min Saw height control: continuously variable, electronically Square 90° maximum working range: 140 x 140 mm 45° max: workspace flat 90° Max: 240 x 80 mm 45° max: work area round 90° Max: 150 mm 45° max: supplies length easy stroke: 5-1000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Gewicht(Säge)CA.:3100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm footprint Lxw: 2500 mm x 1300 mm, the machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very a ...

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

Refurbished: 2018 Year of construction: 1993-2000 PLC: Siemens S7 Blade 175-250 mm Power 1,5 KW Saw blade feed mm/min Cutting speed: 20-170 m / min (at option high speed spindle differierend) Workspace square Max: 60 mm Flat maximum work area: 40 x 80 mm Work area round: 2-70 mm Supply length 5-2000 mm Nachschubgeschw. 600 mm / sec (Saw) approximate weight: 1200 kg (Magazine), approx.: 600 kg Dimensions Lxwxh (saw) about: 3300 mm x 1000 mm x 2000mm (Magazine) about: 3900mm x 1500mm x 1300mm Footprint Lxw 4900 mm x 2000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Minimum lubrication system overhaul -Replacing common wear parts -Overhaul of the lo ...

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Among other things, following points are renewed: -New PLC control Siemens S7 -Conversion to Siemens HMI - ...

Reconditioned 2018 Control: PLC Siemens S7 Blade max: 500 mm Motor output 5.5 KW Saw blade feed: 0-40 mm / s adjustable Saw height control electronic Square 90° maximum working range: 130 x 130 mm Flat 90° maximum work area: 190 x 130 mm Round 90° maximum working range: 170 mm Supply length 2-4000 mm (Saw) approximate weight: 800 kg (Pusher) approx.: 300 kg Dimensions Lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint Lxw 7200 mm x 1200 mm which is machine overhauled in our House and is then in a like-new condition. Among others were renewed following points: -New PLC control -Conversion to Elgo positioning system -New electric components -New pneumatic lines -New pneumatic components -Overhaul of the valve Terminal -Built-in Menzel minimal lubrication system -Replacing common wear parts -Overhaul of cabin -Overhaul ...

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

Basic refurbished 2018 Saw blade 350-400 mm Engine power 6.5 / 8.5 KW Speed 1500/3000 min-1 Saw height control: electronic Working range Max square: 120 x 120 mm Flat maximum work area: 200 x 100 mm Flat maximum work area: 250 x 70 mm (width only) Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-600 mm (~ 9999 mm Mehrfachhib) Nachschubgeschw. Max. 500 mm / s Weight approx. 1300 kg Dimensions Lxwxh 1800mm x1300mm x1950mm The machine is completely overhauled in our House and is then in a like-new condition. Among other things, following points are renewed: -Modification on PLC control -Conversion on Siemens HMI user interface -Conversion to ball screw with servo control -New electric components -New pneumatic lines -New pneumatic components -Conversion on Valve terminal -Optimization of the Absaugungleistung -New Menzel mi ...

Overhaul year: 2018 Year of construction: 2000-2008 Saw blades Carbide / HSS: 315-360 mm Power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Cutting speed Blade (350 mm): 16.4-142.8 m / min Saw height control adjustable: electronic Bdgmy08nkg Square 90° maximum working range: 100 x 100 mm Work area round 90° max.: 110 mm Supply length 5-970 mm (~ 9999 mm multiple hub) Supply AC servo max speed: 300 mm / s Compressed air connection provided on site: 6 bar Approximate weight saw: 1800 kg Dimensions Lxwxh: 1900mm x 1250mm x 2100mm LxB floor space: 1900 mm x 1250 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. The machine is completed retrofit, both technically and visually in mint condition. A  ...

CIRCULAR SAW Mod ALTENDORF F45 second hand machine CE mark . with Use and Maintenance Booklet and Declaration of Conformity digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3000 max. blade mm.400 blade group inclinable at 45° saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended "bridge" protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1000 Volt. 380/50

Manufacturer Elumatec type MGS 142 Overhaul year: 2019 Year of construction: 1995-2018 Blade Max carbide: 500 mm Power saw motor: 4 KW Speed saw motor: 2800 min-1 Cutting speed blade 500 mm: 4400 m / min Saw height control: continuously variable, electronically Workspace Vierkant90 ° Max: 130 x 130 mm flat workspace: 90° Max: 190 x 130 mm work area round: 90 ° Max: 150 mm pneumatic supply length: 5-560, 10-1120 mm Compressed air connection, by the customer 6 bar Gewicht(Säge)CA.: 800 kg Dimensions Lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint Lxw: 2900 mm x 1400 mm additional description Elumatec SA 142 4KW straight cutting retrofit Elumatec SA 142 4KW straight cutting retrofit Fully automatic saw machines for non-ferrous metal and plastic The machine is both technically and optically after completed retrofit in mint condition. The machine will be  ...

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Westphal Mechanics C7x Commutator Slot Center Machine No. M64127 Year of construction: 09/2019 The commutator slot center has four processing steps. In the steps, the following components are approached: Contact slot saw Insulating groove saw Deburrs Brush The Stäubli TS 80 Robotor with SP1 control has two grippers that transmit the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC More information via this link. Further technical data will follow shortly. The roller straightening unit is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves,  ...

Machine to the dowel, drill and saw the company EKM spezialmaschinen connection value: 4,4 kW 1 pneum. Workpiece clamping system 1 drill head with 5 spindles in row spacing 25 mm / 40 mm / 40 mm / 25 mm 4 piece glue - and plugs Tools 4 piece adjustable on width 220 mm Under table saw Control PLC Siemens Simatic Fully functional replacement for PLC program on CD,. Shipping dimensions: L 1500 mm x W 1500 mm x H 2400 mm Machine weight: 1000 kg Condition good, fully functional

Type MTY 8-70 Grinding wheel motor 250 W. Sawblade diameter 80 – 700 mm. Diamant grinding wheel diameter 125 mm. Total weight 29 kg. Video: abc://abc.youtube.com/watch?v=kYPLaZZwVtA&feature=youtu.be

Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm or square 80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Technical data: -Clip device -Glass Strip saw blade diameter approx. 300 mm -Pneum.. Material clamping - powered 400 V - Working pressure 7 bar -Air consumption per operation approx. 1.6 L / stroke -with: - Removal - roller conveyor with controlled positioning - level stop 3000 mm -Feed - roller 3000 mm - e - foot switch - regulator - space about B 4200 x H 1700 X 900 mm -Weight approx. 600 kg

Compact bridge sawing machine with five CNC controlled axes - sawing / drilling / milling / grinding and polishing with a single machine. A universal machining centre for the processing of natural stone, e.g. granite, marble, travertine and basalt – artificial stone – ceramic slabs CNC control with 15" touch screen and color screen, the five interpolating axes allow for complex machining. Many software tools are included in the scope of delivery, for quick and easy programming (so-called "macros", i.e. pre-programmed editing programs) of – longitudinal and cross-sections – 45° oblique cuts – circular cuts – ellipse cuts – arc cuts – software for drilling – special software for machining kitchen worktops – special software for ceramic processing (tiles + slabs) – special software for engraving work. Remote control console for the control of manual movements, f ...

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.