saw mill used for sale

Spruce log trunk / 3.00m long / diameter approx. 45 cm / sawn in 70 mm / 4 planks Auction-ID: A1-46501-965

Make: Danobat Type: Horizontal Band Saw (2-column) Model: CR 260 A Year: 1996 Manufacturer: Danobat S. Coop. Ltd. Technical data: - Cutting type: Automatic horizontal band saw - Saw design: 2-column construction - Cutting capacity: approx. Ø260 mm (typical for model class) - Drive power: 3 kW (according to plate) Equipment: - Hydraulic clamping vise - Automatic feed system - Control panel with display & keypad - Coolant system - Chip tray / collection area - Safety covers and guards Application: - Cutting of steel bars, profiles and solid materials - Workshop and production use Condition: Used Remarks: Signs of wear, paint damage and contamination; functionality not tested Own mass: approx. 1,200 kg Dimensions (LxWxH): approx. 2,450 x 2,000 x 1,800 mm Auction-ID: A7-45993-43

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-92

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-93

In VaroBoxx Auction-ID: A1-46501-1568

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-59

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-72

roll diameter:420 mm throat:400 mm workpiece height:325 mm table surface area:615 x 615 mm table swivelabel +/-:10/45 ° table - inclinable:+/- 20 ° cutting speed:20 - 2500 m/min total power requirement:2 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,95 x 0,65 x 1,83 m

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

weight of the machine ca.:1750 kg sawing motor:2,2 kW total power requirement:5 kW cutting speed:17 - 90 m/min cutting diameter:320 mm cutting range max.:320 x 320 mm saw band length:4.930 x 34 x 1,1 mm feed length:max 9x 600 mm dimensions of the machine ca.:2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual,

cutting diameter:320 mm saw band length:3280 mm cutting width:320 320 mm total power requirement:3,8 kW weight of the machine ca.:1150 t - columm guidance - roll-conveyer 4000mm / 1000 mm lenght - cutting speed 15 - 105 m / min - mitre cutting up to 60°

Description: -Mitre cuts up to 60° left -Cutting speed 35 / 70 m / min. -Vice with quick-release device -Saw blade guide made of carbide -Belt tension control -Electr. Automatic cooling Auto-Cut System = 3 Stages System -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch -High-speed lowering of the saw frame from the resting position to the workpiece, then switch to normal saw feed -Manual operation Cutting diameter 220 mm Saw blade length 2455 mm Table height 850 mm Cutting width 230 mm Cutting speed 35 + 70 m/min Saw blade dimensions 2455 x 27 x 0.9 mm Cutting capacity at 60° around 90 mm Cutting capacity at 60° square 90 mm Cutting capacity at 60° flat 90 x 100 mm Cutting capacity at 45° Around 150 Cutting capacity at 45° square 150 Cutting capacity at 45° rectangle 150 x 210 Cutting capacity at 90° R ...

Rock-solid band saw - Double mitre cuts up to 60° on the right, up to 45° on the left - AutoCut - Vise with quick-release device - Belt tension control - Electr. Automatic cooling - Material stop max 600mm Cutting diameter 250 mm Saw blade length 3150 x 27 x 0.9 mm Table height 750 mm Cutting width 170 x 310 mm Cutting speed 25 - 90 m/min Cutting capacity at 60° around 130 mm Cutting capacity at 60° square 130 mm Cutting capacity at 45° Round 205 mm Cutting capacity at 45° square 205 mm Connection voltage 400 volts Total power requirement 1.5 kW Machine weight approx. 0.5 t Dimensions L x W x H 0.95 x 1.16 x 1.98 m Condition: never used / new (5)

Miter Band Saw -Mitre cuts up to 60° left -Vice with quick-release device -Belt tension control -Electr. Automatic cooling Cutting diameter 225 mm Saw blade length 2455 mm Table height 850 mm Cutting width 245 x 150 mm Cutting speed 45/90 m/min Saw blade dimensions 2480 x 27 x 0.9 mm Cutting capacity at 60° around 90 mm Cutting capacity at 60° square 90 mm Cutting capacity at 45° Round 145 mm Cutting capacity at 45° square 145 mm Connection voltage 400 volts Total power requirement 1.5 kW Machine weight approx. 0.2 t Dimensions L x W x H 1.43 x 0.72 x 1.7 m Condition: never used / new (5)

Underfloor aluminium circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue Saw blade diameter 450 mm Cutting range at 90 degrees: around 130 mm Cutting range at 45 degrees: around 100 mm Cutting area at 90 degrees: flat 210 x 170 mm Cutting area at 45 degrees: square 145 x 170 mm Speed 2900 rpm Total power requirement 2.3 kW Machine weight approx. 600 kg Dimensions L x W x H 4.0 x 1.5 x 1.5 m Condition: never used / new (5)

Hydropneumatic semi-automatic - Mitre left/right 45° - Head oblique cuts up to 45° (Schifter) - Ball-bearing table - Pneumat. Double clamping device - Machine base with mist spraying device - Chip extraction nozzle on saw blade protective cover Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.27 t Dimensions L x W x H 1.1 x 0.95 x 1.7 m

Double Miter Band Saw -Mitre cuts up to 60° left and 45° right -Vice with quick-release device -Belt tension control -Electr. Automatic cooling Cutting diameter 235 mm Saw blade dimensions 2645 x 27 x 0.9 mm Cutting width 280 x 190 mm Cutting speed 45/90 m/min Cutting capacity at 60° round 120 mm Cutting capacity at 60° square 120 mm Cutting capacity at 45° Round 190 mm Cutting capacity at 45° square 170 mm Connection voltage 400 volts Total power requirement 1.1 kW Machine weight approx. 290 kg Dimensions L x W x H 1.2 x 0.8 x 1.2 m

The assembly saw with elaborate standard equipment and a large cutting range · For mitre cuts on the left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminium profiles · Automatic cooling directly on the saw blade · Safety switch 24 V in the handle with restart lock · 38 kg total weight = easy to transport · Length stop, assembly tool incl. saw blade HSS 250x2,0x32mm, 128 T/ZT 6 +NL Optional: Machine base type 20505 (125,-EUR) Saw blade diameter 250 mm Cutting range at 90 degrees: around 85 mm Cutting range at 90 degrees: square 75 mm Cutting range at 90 degrees: flat 100x65 mm Cutting range at 45 degrees: around 80 mm Cutting range at 45 degrees: square 75 mm Cutting range at 60 degrees: flat 90x60 mm Total power requirement 0.8 kW Machine weight approx. 0.04 t Condition: never used / new (5)

Double mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable - Quick-release vise - Massive, large material support - Automatic cooling Cutting range at 90 degrees: around 255 mm Cutting range at 90 degrees: square 240 mm Cutting area at 90 degrees: rectangle 300 x 180 Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Belt speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Dimensions approx. 1.23 x 1.7 x 1.75 m Condition: New

PILOUS ARG-300F metal band saw was built in 2024 in the Czech Republic by PILOUS-pásové pily, spol. s r.o. The machine is in perfect technical condition, practically unused – only a few test cuts were performed on it. The PILOUS ARG-300F is an extremely versatile machine designed for both industrial plants and professional workshops. It is ideal for precise cutting of workpieces made of, among others, stainless steel and tool steel at an angle of 90°, +45° and +60°. Cutting is performed by means of a reliable saw blade, driven by a powerful electric motor with worm gearbox. The cutting speed is adjustable in a range from 15 to 90 m/min with the use of an inverter. Stable clamping of the workpiece, on the other hand, is ensured by a massive quick-clamping vise. The machine’s design is based on a robust arm made of high-quality grey cast iron. This solution guarantees high r ...

Serial No: 14076 .1 15 A Cutting Diameter: 120 mmx Saw blade diameter: 370 mm Vise: 190 mm Blade thickness: 3mm Motor power: 4kw incl straps with stop Auction-ID: A7-46619-360

tested and working - can be loaded by seller Auction-ID: A3-43528-10927

Serial No. V100220 Projection approx. 1000mm equipped with two tables 450x500 and 600x500 Incl. ribbon welding aperitif and digital display Auction-ID: A7-46619-375

Technical details Manufacturer: TRAUB Werkzeugmaschinen (Germany) Additional plate: Zeiss Ikon AG Stuttgart (inventory) Year: 1971 Type: Industrial power hacksaw (reciprocating metal saw) Drive: Electric motor with belt and crank mechanism Cutting motion: Reciprocating (crank-driven stroke) Stroke speeds: Approx. 40 / 57 / 80 / 115 strokes per minute Construction: Heavy cast iron frame and base Clamping: Manual vice with angle adjustment Cooling: Coolant system with hose Blade: Straight hacksaw blade (reciprocating type) Application: Cutting of solid bars, profiles, and billets in metalworking Condition: Used, with wear and aging components; functionality untested Dimensions and weight (approx.) Length: 1800 mm Width: 900 mm Height: 1400 mm Weight: 600 kg Auction-ID: A7-46498-221

Works perfectly, fully overhauled machine Maximum height 135 mm Maximum width 750 mm Minimum length 650 mm Feed chain width 350mm Maximum blade diameter 381 mm Minimum blade diameter 250 mm Shaft motor 40 kW Electronic feed speed from 7.5 to 30m/min Voltage 380 V Supplied with multiple blades, control rings, machine documents and service keys EC Almost new machine, working +- 10 hours! Auction-ID: A3-43528-36994

Machine number:6541; Operating voltage: 400V, 50Hz; equipped with Siemens control, max. saw diameter 430mm incl. feed rollers and spare saw blades Auction-ID: A7-46619-266

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

Used Fritsch Pulverisette 19 Year of construction 2014 Good condition 220 V 1.5 KW

For sale is the four-roller grist mill of the Seeger brand, which can be seen in the pictures The mill was in use in a brewery until the end and is functional. The bearing has already been overhauled on the predecessor. Specifications: Manufacturer: Seeger Model: VSM 350 Capacity: 750 kg/h Measurements: see last picture

For Sale Used Corundum Disc Mill / Mustard Mill MK95

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base