saw grinding used for sale

grinding diameter max.: mm regulating wheel width: mm max. width of grinding wheel: mm Control: SIEMENS 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 250 mm

Surface Grinding Machine Jung JF520 +Supromatic Built in 1979 The machine was completely overhauled in 1999 Grinding length: 600 mm Grinding width: 250 mm Operating hours: 15000 h Good condition

A CNC cylindrical grinding machine Karstens including a coolant system Knoll VRF 150/620 (1997) and an emulsion separator KGH KFM-1200 (2000) is available. Grinding length: 650mm, center height: 190mm, max. grinding diameter: 3800mm, max. workpiece weight between centers/flying: 250kg/100kg, table swivel: +/-12.5°, table feed: 4m/min, machine dimensions X/Y/Z: approx. 3250mm/2150mm/1800mm, weight: approx. 3500kg, control: CNC 20. An inspection on site is possible.

This 5-axis Michael Deckel S22 was manufactured in 2005. It features a maximum grinding wheel diameter of 150 mm and a spindle speed range of 300 to 8000 rpm. The machine has a robust weight of 3800 kg and includes a cooling/filtration system from Transor Filter GmbH. If you are looking to get high-quality internal grinding capabilities, consider the Michael Deckel S22 internal grinding machine we have for sale. Contact us for further details.

Grinding wheel dimensions (od x id x width): - ajuste vertical manual del a rodillo, Ø min/max to be rectified: 125 mm, Grinding wheel width: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Drive wheel dimensions (OD x ID x W): Ø280 x Ø165 x 254 mm, Working wheel motor power: 30 Cv, Total power: 34 Cv, Weight approx.: 5.500 Kg, Dimensions: 2600 mm long x 1200 mm wide x 1200 mm high

The Octopus sanding dust extraction table is ideal as a work table for dust-free sanding work. With its different footprints of 1.3 to 3.3 m², it offers a safe contact surface for both small and large workpieces. The work surface is made of trapezoidal pressed sheet steel with dust extraction openings and coated with resistant felt in a workpiece-friendly manner. Extraction connection: 200 mm Table length: 3280 mm Weight 200 kg

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible Shaft Machine Shaft Grinding Machine Grinding Rotofera The 7-speed gearbox Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 rpm (400 V, 50 Hz, 3 Ph, 1.0 kW, 16.8 kg)  Continuous use - Separation of motor and tool ensured Fatigue-free working Areas of application - Grinding - Separation - Roughing - Milling - Rust removal - Polishing - Brushes For light as well as for the heaviest work, especially of stainless steel, in boiler and steel construction, in polishing workshops, in apparatus construction, for kitchens and hospital supplies, etc.

BJ Band Saw Kasto SBL 280 U 1998 Conventional lathe E3N01 Lathe Hurco TM8i Surface Grinding Machine FSG-1640AD Wagner 1997 Silent E Forklift R20-15 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX30t 3-axis milling machine Hurco VMX64 Wire EDM Machine Mitsubishi FA20 Zeiss Contura G2 CNC Coordinate Measuring Machine 2007

Cup wheel Ø: 175 mm Table clamping surface: 150 x 250 mm large installation height without/with magnetic plate: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Approx. space requirement: 800 x 600 x 1600 mm Weight approx.: 200 kg

A conventional Schaudt external cylindrical grinding machine is available. Center distance: 1000mm, center height: 180mm, max. grinding diameter: 350mm, max. grinding length: 1000mm, plunge grinding length: 100mm, swivel range: 45°, machine dimensions X/Y/Z: approx. 3200mm/1700mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

PONAR TARNÓW RUP-28 universal grinding machine was built in 1979 in Poland by the Fabryka Obrabiarek Specjalizowanych Ponar-Tarnów. The machine is used for precise grinding of both external and internal cylindrical surfaces in order to achieve the appropriate class of surface roughness and the desired shape. The grinding process is performed on a large work table by means of a grinding wheel that reaches a speed of 45 m/s. The machine’s design has been developed to ensure the highest stability and accuracy of the performed operations during many years of intensive use. All this makes the offered RUP 28 cylindrical and internal grinding machine an excellent choice for production plants, tool shops or workshops specialised in the reconditioning of machine parts. The total weight of the machine is 2600 kg. Technical specifications of the PONAR TARNÓW RUP-28 cylindrical grinding mach ...

dia. of draw-in collets: - mm internal taper of cone draw-in collets: - max. radius to grind: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Stichelschleifmaschine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1100 mm, 3 , 150 mm

Wide belt sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, year 1991 TECHNICAL DATA: Working width max. 1,100 mm Working height max. 150 mm Abrasive belt width 1,110 mm Sanding belt length 1,900 mm 1. Grinding unit Profiled steel contact roller D=200 mm Motor power 15 KW 2. Grinding unit Combined contact rolling - grinding shoe unit Profiled rubberized contact roller, D=150 mm Air cushion sanding shoe Motor power 11 kW 3. Grinding unit Grinding shoe unit, electronically controlled link pressure beam Element width 30 mm Synchronization / counter-rotation Infinitely variable sanding belt speed (frequency converter) Digital display of the sanding belt speed Motor power 11 kW - Transport carpet with stepless belt feed 3 - 15 m/min. - Vacuum table / vacuum clamping device 11 kW - Rotating cleaning brush 0.75 kW - Digital display of the grinding height - ...

1 Qty.1 Second-hand roll grinding machine GRINDER241001-1 Mfc.: Herkules Siegen, min. roll dia.: 250 mm, max. roll dia.: 900 mm, table length: 3,500 mm weight: 20 Tonnes

Manufacturer: Harald Baumgarten/Sema Systemtechnik Model: TM 400S Year of Manufacture: 2014/2015 Type of Machine : Angle Grinding System The system consists of the following components: - Cut-off grinding machine type TM 400 S with bundle loader (manufacturer Sema Systemtechnik, - rod breaking device, - Rod rotary drive / measuring station - Weighing station with section sorting, - Extraction and filtration system, - Soundproof booth (manufacturer: HüWa Schallschutz und Anlagenbau) and protective fencing - Four-column press (Manufacturer: Winter Presses) - Hydraulic power unit with hydraulic pumps - Control cabinet and control panel Find more here - .ucymachines/ Contact us at - sales@ucymachines

grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm Control: CNC : 25 kVA voltage: 110 / 220 / 3x165 / 3x380 VAC control voltage: 24 VDC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

2 Qty.1 Second-hand roll grinding machine GRINDER241001-2 Mfc.: Zocca Italy, Type: RCL 2000/6, min. roll dia.: 100 mm, max. roll dia.: 300 mm, table length: 2,000 mm, weight: 10 Tonnes

grinding diameter: 250 mm grinding length: 650 mm centre height: 125 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wird mit Wartung und neuer Geometrie verkauft Betriebsstunden bisher 12260 Reitstock mit Feinverstellung Schleifspindelstock schwenkbar mit 5° Hirtverzahnung Papierbandfilter Marposs Messeinrichtung Innenschleifeinrichtung The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 762 mm

4 Qty.1 Second-hand roll grinding machine GRINDER241001-3 Mfc.: Farrell, Type: 409, min. roll dia.: 0 mm, max. roll dia.: 762 mm, table length: 2,514 mm, weight: 15 Tonnes

I am selling a wide belt sander OTT MEGA TR11, built in 1996. Configuration: Hard-rubber calibration cylinder Combination unit rubber cylinder + pneumatic shoe with segment control. Working width 1100mm. Electronic height adjustment with digital display. 3-160mm 1 motor 11kW 2 feed rates. Sensitive adjustment of the shoe position. Pneumatic adjustment of the shoe and cylinder pressure. Condition LIKE NEW ! The machine worked very little. Available the same.

Brush sander WOODLAND MACHINERY with metal brush (new) Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Total motor power 11.57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Price 6700 Eur (EXW Jonava, Lithuania)

Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible.

Key data: 1350 mm, 1

- Working width 1350 mm - Rubberized pressure rollers - Roller table at the inlet and outlet - Belt feed speed 2.5-13 m/min, infinitely adjustable, perforated belt (prepared for vacuum tensioning device by external, not included drive motor) - Combi-contact roller-grinding unit (15 kW), with electr link pressure bar (element width 25 mm), belt speed infinitely variable from 2.5 to 20 m/s, belt length/width 2150/1370 mm, belt blow-off device, sanding shoe rest in the machine, pneum. Abrasive belt tensioning device - 1 rotating workpiece cleaning brush (0.75 kW) on the outlet side of the machine - Paintwork: RAL 5018 - Total connected load approx. 22 kW (36 A) - Operating voltage: 400 V, 50 Hz Technical data subject to actual equipment The sale is carried out on behalf of the owner from the current location, in the condition as existing, excl. Warranty.

Inv. Num. : 8949 Type: BUAJ 9 NC Producer: JUNKER Created: 2005 Parameters: Maximum sanding length: 320 mm Grinding diameter: 160 mm Tip stroke: 85 mm Drive power of the grinding wheel spindle: 2.2 kW Maximum speed of the grinding wheel spindle: 3600 1/min Machine height: 1700 mm Machine length: 2300 mm Machine width: 1800 mm Machine weight: 1400 kg

Code: 0345 Brand: STROMAB Model: KGS 650 - CE Standard Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Kündig ENORM PRIMO – TOP CONSTANT TABLE MACHINE / automatic Headhead delivery Wide-belt calibration fine grinding machine Combination unit contact roller and pneum. - Sanding pad unit Enormatic Digital thickness display for workpiece thickness Belt drive motor power approx. 9 kW Contact roller level infinitely variable according to grain scale Infeed table and run-out table with roller support Working width 1100 mm Feed speed 2.5 - 15 m/min Machine is WORKSHOP OVERHAULED from stock Lieboch  

Internal grinding machine WMW SI4 A

Grinding length: 1500mm, grinding width: 400mm, max. working height: 500mm, vertical movement: 520mm, table dimensions X/Y: 1600mm/350mm, table longitudinal movement: 2050mm, grinding segments: 12, grinding segment dimensions X/Y/Z: 80mm/25mm/150mm, machine dimensions X/Y/Z: approx. 6100mm/2400mm/2250mm, weight: approx. 8500kg. Documentation available. An on-site inspection is possible.

Key data: 1400 mm

5 Qty.1 Second-hand roll grinding machine GRINDER241001-4 Mfc.: Cincinnati, Type: 50 inch, min. roll dia.: 400 mm, max. roll dia.: 1,400 mm, table length: 4,500 mm, 5100 mm max distance between head, weight: 50 Tonnes, motor head 29.6 KW, motor wheel 67 KW

max. wheel diameter: 406,4 mm gear width: 66 mm max. module: min. module: module: Control: FANUC Series 150M total power requirement: 61,6 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 5,5x4,6 m The GLEASON Phoenix 400HG is a high-precision CNC bevel gear grinding machine designed for the grinding of spiral, hypoid, and Zerol bevel gears in various operations. The machine is based on a 6-axis design with an additional dressing axis (D-axis) and enables fully interpolated movements between the tool and the workpiece. This allows for both generating and formate processes. The CNC control system synchronizes all movements, resulting in very high profile accuracy, repeatability, and flexibility. • GLEASON PHOENIX 400HG CNC machine with FANUC 150M control system • Gleason HMI – user interface for easy entry of gear parameters and correction values • Automatic dr ...

Used green bean slicer from the French company Femia type C 32. The machine cuts beans to a length of 26.32 or 36mm. Cutting length capacity 2-2.5 T/h. Acid-resistant design. 5 pieces available.

CONTROLS   PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE   Working width: 1000 mm   number of brushing station: 6 BELT GRINDING UNIT   workpiece height (max): 100 mm   spindle revolutions (min): 0.3 /min   spindle revolutions (max): 10 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1750 mm   total height: 2200 mm   total weight approx.: 1500 kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Completely overhauled in 2013 Heavy duty workpiece headstock tailstock Without chuck and without bezel in the photo Kelco 90 control The machine can be viewed in operation at the customers premises from 2025 up to and including January 2026. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1.700 RPM, Regulating wheel width: 150 mm, No. of regulating wheel speeds: 4, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Grinding wheel head motor power: 15 Cv, Total power: 16,5 Cv, Long: 1.654 mm, Width: 1.500 mm, Tall: 1.535 mm, Weight: 2.200 kg

Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1.700 RPM, Regulating wheel width: 150 mm, No. of regulating wheel speeds: 4, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Grinding wheel head motor power: 15 Cv, Total power: 16,5 Cv, Long: 1.654 mm, Width: 1.500 mm, Tall: 1.535 mm, Weight: 2.200 kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Dive (auto/manual): Automatic, Maximum length to be rectified in plongeé: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

The ESTARTA 320 Centerless Grinding Machine is a used industrial machine designed for efficient and precise grinding tasks. It features a grinding wheel with dimensions of Ø 406 x Ø 203 x 200 mm, and can handle a diameter range from 1.5 to 100 mm for grinding applications. The machines regulating wheel, sized Ø 270 x Ø 140 x 200 mm, allows for adjustable speeds ranging from 10 to 250 rpm, providing versatility for various grinding tasks. The machine offers a maximum infeed grinding length of 200 mm, supported by a grinding wheel width that matches the regulating wheels 200 mm, ensuring a balanced and steady operation. The grinding wheelhead operates with a motor power of 15 kW, delivering robust performance for intensive grinding needs. With dimensions measuring 2020 mm in length, 1300 mm in width, and a height of 1420 mm, this machine is compact yet sturdy, weighing 4200 kg. It is w ...

Surface Grinding Machine BERGAMINI BERMI 500 Matic, capacity 500x200 mm. Automatic cycle, Max working dimensions: 500x200 mm, Longitudinal travel x axis: 505 mm, Cross travel y axis: 200 mm, Clearance between worktable and spindle axis: 350 mm, Feed rate x axis: 2-20 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 0 - 2800 rpm, Wheel dimension: 200x20x50 mm, Spindle motor power: 1,8 Kw, Weight: 1.150 Kg, Accessories: Auto cycle, DRO, elecro-permanent magnetic plate

Offered is a surface grinding machine (cup wheel grinder): Table surface X/Y: approx. 175mm/450mm, max. grinding length: approx. 200-250mm, max. grinding width: approx. 175mm, speed: approx. 2800rpm, weight: approx. 450kg, inspection possible by appointment.

Center height: 150mm, center distance: 800mm, max. grinding length: 400mm, table dimensions X/Y: 1245mm/200mm, grinding spindle diameter: 80mm, grinding spindle length: 400mm, workpiece carrier: ISO50, spindle speed: 8000rpm. Documentation available. An on-site inspection is possible.

Centerless grinding machine manufactured in 2008. This DANOBAT 327 MDA features a maximum wheel width for plunge grinding of 500 mm and a peripheral wheel speed of 50 m/s. It has a grinding wheel motor power of 55 kW and a regulating wheel speed that is infinitely variable from 10 to 225 min⁻¹. If you are looking to get high-quality grinding capabilities, consider the DANOBAT 327 MDA machine we have for sale. Contact us for further details.

Coming for sale : TOS Hol Monta UB85/6000 CNC , 2014 Under power less used and very good condition

Cylindrical grinding machine manufactured in 2004. This AVYAC NC240 features a maximum tool diameter of 40 mm and a sharpening length of 950 mm. It is compatible with HSS and carbide materials, equipped with an automatic touch probe for precise tool positioning. The machine also includes programmable indexing for variable teeth/flutes and an integrated oil mist extractor for effective mist control. If you are looking to get high-quality grinding capabilities, consider the AVYAC NC240 machine we have for sale. Contact us for further details.

Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details.

grinding length: 1250 mm grinding width: 400 mm workpiece height: 550 mm table surface area: 1720 x 400 mm dimensions of grinding wheel: 400 x 50 x 127 mm table height over floor: mm : 1250 x 600 mm grinding spindle speed: 3000 U/min table load capacity: 1100 kp total power requirement: 13,8 kW weight of the machine ca.: 6,0 t dimensions of the machine ca.: 5,0 x 3,4 x 2,4 m Surface grinding machine - Magnetic grinding wheel - Coolant system - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BERNARDO URS 1000 N universal grinding machine was built in 2021 in Austria by PWA Handelsgesellschaft m.b.H. It is an extremely versatile machine for precision grinding of both cylindrical and internal surfaces with a maximum length of 1000 mm. The best machining results during even the most intensive challenges are guaranteed by the precisely aligned work head with stable grinding wheel spindle. The grinding wheel spindle features adjustable sliding bearings consisting of three segments. It is adjusted hydraulically or manually according to the operator’s needs. Movement in the X and Y axes, in turn, takes place on precision, hand-grooved guides, ensuring high accuracy and smooth movements. The BERNARDO URS 1000 N also stands out for its sturdy, heavily ribbed construction with large panels, which is resistant to temperature fluctuations and deformation. The work table can be tilt ...

A Voumard internal cylindrical grinding machine completely overhauled in 2020 is available. Grinding diameter range: 5mm-200mm, grinding depth: 250mm, speed: 1000rpm, speed control: continuously variable. An on-site inspection is possible.

Voumard CNC 130F Gang Style 3 Spindle CNC ID Grinder, 2009 – Mist Collector SPECS SHEET X-Axis Travels: 11.81″ Y-Axis Travels: 7.87″ Z-Axis Travels: 9.84″ Spindle Motor: 5.5 HP Max Grinding Wheel Diameter: 5.91″ Max Grinding Wheel Width: 0.59″ Grinding Spindle Speed: 12,000 RPM Grinding Wheel Dimensions: 5.91″ x 0.59″ x 1.97″ Center Height: 6.5″ Workpiece Length: 7.87″ Grinding Depth: 7.87″ Workhead Spindle Speed: 1,000 RPM Workhead Swivel Range: -30/+120°F Internal Grinding Spindle Speed: 42,000 RPM Electrical: 460V, 3-Phase Equipped With Fanuc 21i CNC Controller