127,367 used machines on RESALE, but how to find them? Machine Search
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg
Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1745 rpm -Grinding discs: max. Ø 315 mm -Operating voltage: 380 volts -Weight: 230 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Peripheral speed: 45 m/s -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 290 kg
Long belt sanding machine, veneer sanding machine, Specifications: Table width 2800 mm Grinding width 2500 mm Table depth approx. 2000 mm Sanding belt length 9500 mm Pressure lamellar belt length 10 mm x 7750 mm Sanding belt dimensions 150 mm x 9500 mm Belt speed 25 + 12.5 m/s Suitable for intermediate paint sanding Workpiece height 6 - 220 mm Grinding engine power 24 kW Total power 27 kW Machine dimensions approx. L 5000 x W 2300 x H 2400 mm Space requirement of the machine in width is 3500 mm Machine weight 2600 kg TOP condition, technical documentation, sanding belt.
Technical data of the used Equiptop ESG-1228ASD Tangential Rectification: Magnetic plane: 712 x 330 mm Automatic working stroke: 760 mm (manual 830 mm) Grinding wheel diameter: 355 mm Grinding wheel thickness: 50 mm Engine: 7 1/2 hP Automatic diamond maker Increased working height CE certified; Year: 2000 Machine in excellent condition, CE certified.
grinding stone, grinding pin -Recording: M12 -Outer diameter: 50 mm -Length: 65 mm -Quantity: 74 pieces -Sale: only complete set -Weight: 28 kg
grinding stone, grinding pin -for internal grinding machine -1 Collet chuck -Cone mount: Ø 53 mm -Grinding pins: various diameters -Outer diameter: 1-40 mm -Sale: only complete set -Weight: 6 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg
Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA S/N XP 20100082 (by Glasmek AB Sweden, renovated in 2005) Manufacture: Ashton Industrial Sales LTD / UK Year of manufacture approx. 2000 Professional high-performance glass grinding machine 2x diamond bracelet transverse straps High-speed abrasives and diamond abrasives 400 V , 50 Hz Ball roller tables for easy movement of the glass panes. Table dimensions: L x W x H = 3.85m x 1.20m x 0.9m Weight 600 kg CE marked
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg
SPECIFICATIONS: Max. machining width: 800mm Working height: 150mm Installed power Kw: 3.0 2 brushing units consisting of 4 counter-rotating brushes Ø250mm x 220 mm Transport carpet with speed control Controller
used
Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Motor power grinding wheelhead: 15 Cv, Total power: 16.5 Cv, Long: 1.654 mm, Width: 1.500 mm, High: 1.535 mm, Weight: 1.900 kg
Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -grinding device -Disc: Ø 190 mm -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 700/700/H1400 mm -Weight: 275 kg
Technical data of Used Universal cylindrical grinding machines Cometa HSP 2000: Wheel diameter: 762 mm Max diameter working: 800 mm Center height: 410 mm Working lenght: 2000 mm Wheel power: 15 hP Weight: 11 ton
Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Automatic / Automatic, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Cnc axes nº: 6, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:
SPECIFICATIONS: Workspace: Maximum width: 1600 mm Minimum length: 550 mm Working height: min. 10 mm - may. 120 mm PLC control COMPOSITION: I. Group: 02 Side brushes with automatic adjustment II. Group: 01 Transverse rotation brush (immersion brush) III. Group: 03 Interchangeable heads with disc brushes or brushes IV. Group: 02 edge strip heads V. Group: 03 Interchangeable heads with disc brushes or brushes VI. Group: 01 Transverse rotation brush (immersion brush) EQUIPMENT: 01 Motorized transport carpet: 2200 x 1600 mm 01 Self-cleaning motorized unloading belt (conveyor belt) 2500 x 1600 mm
Disc grinding machine Grinding machine for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model No.: PQ-4 Year of construction: 1982
NC – controlled precision rotary table surface grinding machine with horizontal grinding spindle and transverse slider - brand new Rotary table diameter 1,000 mm Largest grindable diameter 1,150 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 800 kg Circumferential grinding wheel Ø 450/203 mm x W 80 mm Highest workpiece height with new grinding spindle 700 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 14.7 kW Rotary table drive power 5 kW Torque 30 Nm Weight approx. 15,000 kg
Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 55 mm -Outer diameter: Ø 110 mm -Width: 22 mm Price: per piece -Number: 12 available -Weight: 0.7 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Number: 7x discs available -Price: per piece -Weight: 1.9 kg
Grinding drum, deflection drum, belt grinding machine, belt sander -Drum is for a husband grinder -Drum width: 170 mm -Drum: Ø 200 mm -Eccentric adjustment with touch clock -Number: 2x drums available -Price: per piece -Dimensions: 200/290/H280 mm -Weight: 13 kg
Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > ...
1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m
Machine Details Stock-No. 1105-03893 Type of machine Surface Grinding Machine - Horizontal Make CANTALUPPI Type 2100 x 450 Year of manufacture 1975 Type of control conventional Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details grinding length 2100 mm grinding width 450 mm workpiece height 650 mm table surface area 2200 x 750 mm distance table - spindle center max. 600 mm table speeds 1 - 25 m/min Cross Feed Autom. 1 - 60 mm/stroke grinding wheel size 400 x 100 x 76 mm grinding wheel speeds 1450 rpm total power requirement 15 kW Additional information Accessories: Magnetplate, 2100 x 400 mm, grinding wheel with flange, draw-off Device.
• Grinding chamber with gradation for large individual parts • Dimensions: 3400 x 3750 x 2400 mm • Performance: Long sanding belts 5500 x 100 mm
Technical data (subject to change) Space requirement 4,200 x 2,600 mm Tape measure 7,800 x 150 mm Table size 2,900 x 1,400 mm usable working length between the uprights max. 2700 mm Table lift by means of handwheel 340 mm Offset right 1100 mm Weight approx. 1300 kg (Compressed air connection required)
Grinding and polishing machine for the shoemaker's profession, cleaned and tested.
CONTROLS PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE Working width: 1500 mm TRANSPORTATION BELT speed min.: 0.3 m/min speed max.: 5 m/min ELECTRICAL SPECIFICATIONS mains power supply: 28 kVA mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 4000 kg
Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)
Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)
Technical data of the Favretto TU 500 Grinding: Max grindable length: 5000 mm Max grindable width: 1500 mm Max grindable height: 1300 mm Passage between uprights: 1530 mm Load capacity: 4500 kg Approximate weight: 20000 kg Voltage: 380 V Approximate installed power: 60 kW Grindstone: Normal dimensions: 500x203 mm Thickness: 100 mm Rotation speed: 1400 rpm/1' Steerky transverse feeds: 1 to 10 mm/stroke Transverse displacements adjustable continuously: from 0.1 to 6 m/1' Table: Useful dimensions of the support surface: 1200x5000 mm Continuously adjustable speed: from 2 to 30 m/1'
Key data: 1300 mm, 5
Wide belt snding machine Manufacturer: Heesmann Model: LSM 8 Equipment: - Transverse sanding unit - Longitudinal sanding unit - Longitudinal sanding unit - Brush unit - Brush unit
Profile grinding machine / strip grinding machine Manufacturer: DIMA Model: LPS /9 Year of construction: 1994 9 grinding units / disc grinding units
Grinder Schaudt BHU 40A Swing diameter: 400mm Center distance: 630mm The technical data can be found in the pictures. approx. transport dimensions and approx. weight: 3.5m x 2m x 2m, 3,500 kg Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is in pristine condition. You can make an appointment for a viewing at any time. We'd love to hear from you.
Ref. -No.: 10332 Manufacturer: GEORG MüLLER Year of construction: 1969 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Germany Machine length: 1200 mm Machine width: 800 mm Machine Height: 1800 mm Grinding height: 120 - 200 mm Max. Grinding length: 310 mm Grinding Width: 175 mm Total Power Requirement: 2,8 kW Weight Of The Machine Ca.: 0,4 t Grinding head adjustment (vertical): 165 mm Max. grinding head infeed: 12 mm magnet clamping surface: 250 x 150 mm Grinding wheel dimensions: 170 x 100 x 76 mm Grinding spindle - speed: 2850 RPM Grinding spindle drive: 2,2 kW Drive motor power: 380 V
Ref. -No.: 10316 Manufacturer: TOS Year of construction: 1996 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Slovakia Machine length: 3450 mm Machine width: 2236 mm Machine Height: 2000 mm Weight Of The Machine Ca.: 4,4 t Grinding wheel: 260 mm Table Dimensions (Lengthxwidth): 1500 x 400 mm Height of grinding with new grinding wheel (without magnetic plate): 500 mm Grinding wheel fx width x bore: 350 x 40 - 80 x 127 mm Width of the composite grinding wheel: 200 mm Max. load on the work table: 5000 N Table surface: 400x1000 / 1500 mm Max. distance of the spindle axis: 675 mm Max. length of grinding: 1000/1500 mm
Ref. -No.: 10159 Manufacturer: KELLENBERGER Year of construction: 1974 Storage location: Halberstadt Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm
Ref. -No.: 10301 Manufacturer: TITAN Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm
Ref. -No.: 10120 Manufacturer: BRIERLEY Storage location: Halberstadt Country of origin: Deutschland Workspace: 2,5- 32 mm
maximum number of results exceeded
please refine your search
1.500 € 
