saw grinding used for sale

et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-161

Machine: Sliding table saw Carriage: 3200 x 360 mm Main plank: Ø250 / 300 / 350 / 400 mm Blade shaft: Ø30 mm Cutting height: 125 mm (blade Ø400 mm) Blade inclination: 90° - 45.5° Blade Motor: 4 kW (5.5 hp) Auction-ID: A1-50215-28

Machine: Sliding table saw Carriage: 3200 mm 90° cutting height: 140 mm (blade Ø400 mm) 45° cutting height: 97 mm (blade Ø400 mm) Blade inclination: 0 - 45° (manual) Main Blade Speeds: 3000 / 4000 / 5000 RPM Scorer: Ø120 mm, 8500 rpm, independent motor Parallel fence cutting width: 1270 mm Guide: manual parallel Ø40 mm with micrometric adjustment Table: outlet extension + squaring frame Safety: emergency stops, suspended protection with suction Ø80 mm, magnetothermal circuit breaker, automatic engine brake Suction: Ø120 + Ø80 + Ø60 mm, flow rate 1200 m³/h Auction-ID: A1-50215-7

et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-261

Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 attachment, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, tiles and natural stone. Auction-ID: A7-50066-126

Technical characteristics: - Table dimensions: 1000X560 mm - Trolley dimensions: 3200x350 mm - Squaring carriage stroke with scoring machine: 3350 mm - Cutting width on rip fence: 1300 mm - Blade inclination: 0-45° - Max cutting height with diam. Blade: 350 mm - 118 mm - Max cutting height at 45° blade front: 350 mm - 81 mm - Max blade diameter / saw hole: 350/30 mm - Saw rotation speeds: 3000/4600 rpm - Suction nozzle diameter in the frame: 100 mm - Saw Motor Power: 4kW (5.5HP) 50Hz - Incisor motor power: 0.55kW (0.75hp) - Noise level according to en 27960 standards: 81.2-83.9 dB(A) - Maximum angle opening with stops: 3600 mm Standard equipment: - Sliding anodized aluminum alloy trolley on precision adjustable barn guides made of hardened and ground steel - Fixed protection on saw blade - Additional table with 90° quick-release angle guide and step-by-step tilt graduation at 10° ...

Motor power: 900 W, Maximum cutting depth: 115 mm, Variable speed trigger: 0-2800 rpm, Tool-free blade change, Comfortable ergonomic handle with soft coating, Adjustable base Auction-ID: A7-50066-176

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-50208-121

Controllo touch KASTO BASIC CONTROL Auction-ID: A7-50204-18

et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-61

Machine: HOMAG Flat Saw CHF 325 38/35 Year: 2004 Max. cross-section: 3800x3800 mm Max. height: 60 mm Blade projection: 72 mm Ø main plank: 350x75 mm Ø scorer: 200x45 mm Engine power: 9.2 kW (12 hp) Scoring power: 1.1 kW (2.2 hp) Speeds: Carriage feed 0-60 m/min, return 60 m/min, programmed pusher 25 m/min Tables: 3 air cushion tables 1900x600 mm Gross Weight: 4200 kg Power supply: 380 V Compliance: CE Auction-ID: A1-50215-5

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-66

Machine: Double Head Chainsaw Blades: 2x Ø500 mm widia, bore Ø32 mm (reducing) Tilt: 90° / 45° / 22.5° + intermediate positions Blade motors: 2x 2.2 kW (3 HP), 2800 rpm, three-phase 230/400V-50Hz Blade feed: pneumatic with hydraulic adjustment Cutting capacity: min. 305 mm / max. 4-6 m depending on version Heads: 1 fixed + 1 mobile (electronic positioning) Clamping: 2 vertical vices + 3 pneumatic horizontal vices Equipment: 2.5 m roller conveyor, nebulization lubrication, protective boxes, waste collection bin Control: PLC, Membrane Protected Keypad Operating pressure: 7 bar Auction-ID: A1-50215-31

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-166

Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastic, aluminum, brass and steel alloys Auction-ID: A7-50066-284

Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 attachment, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, tiles and natural stone. Auction-ID: A7-50066-226

-Cutting dimension: 4300mmx4300mm MAX -Blade protrusion: 70 mm -10hp engine -Weight: 3000KG -Year: 2012 Auction-ID: A1-50215-16

Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastic, aluminum, brass and steel alloys Auction-ID: A7-50066-184

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-266

Motor power: 900 W, Maximum cutting depth: 115 mm, Variable speed trigger: 0-2800 rpm, Tool-free blade change, Comfortable ergonomic handle with soft coating, Adjustable base Auction-ID: A7-50066-276

Max. panel width: 900 mm Max. feed: 48 m/min Trees: 1 Engine power: 18.5 kW Auction-ID: A1-50215-12

Motor power: 900 W, Maximum cutting depth: 115 mm, Variable speed trigger: 0-2800 rpm, Tool-free blade change, Comfortable ergonomic handle with soft coating, Adjustable base Auction-ID: A7-50066-76

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-50066-372

Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 attachment, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, tiles and natural stone. Auction-ID: A7-50066-26

Cutting height: 120 mm Motor output: 11 kW cutting width: 420 mm Cutting length: 5200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Basic equipment of the series: - Rear machine table with collets and roller rails - Program slider for material positioning via collets - Machine table on saw body with recesses for the collets - Pressure beams for material fixation during cutting - Robust saw carriage, with main and scoring saw, as well as angle pressure device - Integrated drilling and milling unit for undercut drilling - Cadmatic4 control with PowerTouch user interface Technical data: Cutting length 4300 mm Cutting width (program slide travel) 5800 mm Roller rail (element 8-lane) 2 pieces Roller rail (element 2-lane) 4 pieces Collets 7 pieces Pitch 75/275/475/1075/1425/1825/3425 mm measured from the angle ruler to the middle of the collet Air cushion table with frontal roller element 2160 x 800 mm 2 pieces (as item 1 extended one after the other on a stop ruler) Air cushion table with frontal roll ...

Auction-ID: A1-50229-30

Industrial horizontal beam saw for cutting chipboard, MDF, HDF, plywood and laminated panels. CNC-controlled automatic material feed with pneumatic pressure beam, main saw blade with scoring unit. Suitable for high-precision panel cutting in industrial woodworking production. Auction-ID: A1-50229-6

Auction-ID: A1-50229-54

Sawblade tiltable: 45 ° Length of the rolling table: 3.200 mm cutting width: 1.250 mm Motor output: 7,5 kW Cutting height: ca. 204 mm Saw blade diameter: 550 mm Speed: 3000 / 4000 /5000 U/min. weight of the machine ca.: 1.200 kg : Nein : Elektrisch : Elektrisch : Ja : Digital The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Additional technical specifications: • Material feed support length: approx. 1900 mm • Material discharge support length: approx. 5000 mm • Hydraulic clamping: available • for miter cuts

Drehzahl: bis 3000 U/min, max. Sägeblattdurchmesser: 315 mm, Betriebsspannung: 380 V, Frequenz: 50 Hz, Anschluss: 2600 W, Nennstrom: 5,5 A, Tischabmessungen: 1100 x 660 mm

• Incl. left roller conveyor • Roller conveyor width: 240 mm

Additional technical specifications: • Digital display: available • Roller conveyor: available • Roller conveyor length: approx. 3000 mm

Additional technical specifications: • Support surfaces right and left: 4000 mm each • operating voltage. 3 x 400 V

Incl. sliding table, incl. extraction system from manufacturer SCHEPPACH. Attention: the machine can be transported on a standard truck! Additional technical specifications: • Incl. sliding table • Slide length: approx. 3100 mm • incl. extraction system from manufacturer SCHEPPACH

• Incl. roller conveyor on the left • Roller conveyor width: 400 mm

Cutting capacity: round 230 mm, square 230 mm, flat material 280 x 150 mm Cutting speed 15 – 110 m/min Mitre cuts left 45°/60° Automatic workpiece feed Hydraulic lowering Micro Spray System Coolant Setup Hold-down device Roller conveyor

cutting diameter: 400 mm capacity 90 degrees: flat: 500 x 400 mm saw band length: 6220 x 41 x 1.3 mm speed: 15.0 - 150 m/min work height max.: 750 mm workpiece weight: ca. 250 - 300 kg/m Control: MEBA NC coolant tank capacity: 80.0 ltr. oil volume: 30.0 ltr. power capacity: 5.5 kW weight of the machine ca.: ca. 2250 kg range L-W-H: 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic two-column linear guide system Fully automatic machine for 90° cuts only - User-friendly NC dialog control With plain-text display 5.7-inch CE panel Program memory with 50 programs, each with 20 steps - Automatic material feed Minimum cutting diameter .. Ø 5.0 mm Residual piece length without bundle clamping .. manual 25.0 mm Residual piece length without bundle clamping .. automatic 110 mm Automatic movement of the ...

: gebraucht : 2023 : 6246 : prompt, Zwischenverkauf v : Italien : 2970 € : 1 : 300 mm : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 500 mm : 1050 mm : 990 mm : 135 kg demo machine / mint condition net price vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via ...

Eima Sliding Table Saw Type 122 Cutting width min/max 210-2565 mm Cutting depth of cutting 2500 mm Maximum blade diameter 400 mm Cutting height ~100mm Tilting cutting unit 90° – 45° 2×4.4kw motor Total power requirement 10kw Electronic Cutting Width Eats Technical documentation and CE certificate Net price

cutting diameter: 260 mm saw band length: 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square: 260 x 260 mm capacity 60 degrees: flat: 320 x 260 mm cutting length min.: 6 mm cutting speed: 12 -120 m/min Control: KASTO BasicControl total power requirement: 2,5 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade, designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade, selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable fro ...

cutting diameter: 360 mm saw band length: 4870 x 41 x 1,3 mm cutting width: 360 mm cutting speed: 11 - 110 m/min : 4,0 kW height of the workpiece: 800 mm weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,3 x 1,9 x 2,2 m Automatic hydraulic band saw with - SIMATIC OP17 NC control - Single material feed 600 mm - Max. programmable length 6000 mm - Hydraulic saw blade tensioning (36–40 bar) - Motorized chip conveyor - Emergency stop device - infeed roller conveyor 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 260 mm Rund documentation: vorhanden automatic feeds: ja : ja weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1,7 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Ficep Model: K 60 Year: 2012 Condition: Used Stock number: 9525 Cutting area: 60 x 10 - 610 x 310 mm Strap length: 6350 mm

Automatic panel sizing beam saw with rear lifting table Max panelsizes when rear loading: 5600mm x 2240mm Max. cutting length x width: 5600 x 5600 mm. Max. stack weight for the lift: 10 ton max stack height 580 mm Saw blade outstand: 125mm Main cutting motor 13,5 kW Sawblade diameter 450 mm. Scoring saw motor 2,2 kW Feed speed of the saw carriage, forward 5 to 150 m/min, return 150 m/min Speed of the pusher 80 m/min Number of grippers: 9, centers 75/275/475/1075/1775/2475/3275/4075/4875 mm. 5 air flotation tables in the front 2810 x 650 mm Controlls: CAD-matic 4.0

Cutting capacity: 4300 mm x 4300 mm. Sawblade height: 125 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 1-150 m/min. Returnspeed 150 m/min. Programm fence speed: 90 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1075/1825/2625/3425 mm. Machine control: CADmatic 4 ? Professional Hardware: Windows XP (US) TFT display Software showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.

saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand: FAT Model No.: MOD 270 Year: 1999 Motor: Three-phase, 400V. Manual band saw with 2 cutting speeds. Cutting capacity: - Round, 90º - 220mm - Round, 45º - 170mm - Round, 60º - 90mm - Square, 90º - 215mm - Square, 45º - 170mm - Square, 60º - 90mm - Rectangular, 90º - 250x170mm - Rectangular, 45º - 170x170mm - Rectangular, 60º - 90x90mm