saw grinding used for sale

saw blade diameter: 250 - 1250 mm grinding wheel diameter: 250 mm total power requirement: 3,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 850 x 1000 x 1800 m Circular saw blade sharpening machine for sharpening medium to coarse metal saw blades Saw blade diameter Cold circular saws : 250 - 1250 mm Hot circular saws : 900 - 1700 mm Tooth pitch up to : 42 mm Grinding wheel double height : 25, 37, 50, 75 and 100 Grinding wheel revolutions : 2000 and 2500 rpm Grinding wheel diameter : 250 mm Pre-cutting tooth can be chamfered on both sides : up to 45 degrees Cutting edge geometry for hot circular saws : = -4 degrees Weight of the machine : 1000 kg external dimensions : 850 x 1000 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 800x500 mm saw band length: 7200x40 mm cutting width: 880 mm cutting speed: 60-100 m/min engine output: 7,5 kW weight: 8800 kg total power requirement: 7,5 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 26500x6000x2100 m Horizontal bandsaw manufacturer: Behringer, Horizontal bandsaw Automatic bandsaw type HBP 430 Metal bandsaw, Band saw machine, bandsaw, Vertical bandsaw, Horizontal bandsaw, hydr. horizontal bandsaw machine, Semi autom, Band saw machine, Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 1.5 kW Power supply: 220 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium

Pfeiffer Piccolo pendulum saw with a sturdy roller feed system for cutting boards and beams. The machine is fitted with a pneumatic saw feed mechanism with a safe two-hand operation system. Video available on request. Technical data: Cutting height: max. approx. 120 mm Cutting width: max. approx. 600 mm Roller table: 250+360 cm Feed: Pneumatic Condition: Gebraucht Location: Tauberbischofsheim, Germany

Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: Cutting length: approx. 2,200 mm Mitre angle: 45° – 90° Workpiece: max. 50 × 70 mm Further details: See PDF Condition: Gebraucht Location: Tauberbischofsheim, Germany

Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Cutting height: max. 120 mm Feed length: max. 5,500 mm Cutting width: max. 700 mm Saw blade diameter: max. 700 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: Motors: 2 Length: approx. 320 cm Width: approx. 140 cm Height: approx. 160 cm Table: swivelling Technical details: on request Condition: Gebraucht Location: Tauberbischofsheim, Germany

The Ulmia 1622 table saw is designed for precise rip and cross cuts in solid timber and wood-based materials. Its robust construction ensures reliable performance in craft workshops and general workshops. Ideal for joinery and general timber and furniture construction. Technical data: Table size: 560 x 710 mm Saw blade diameter: max. approx. 300 mm Motor: 1.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

SCM Type M3 multi-blade and trimming circular saw for efficient rip cutting, trimming and cutting to size of solid timber, boards and planks. This robust machine is suitable for precise batch cutting with multiple saw blades and a continuously adjustable chain feed. Technical data: Chain width: 300 mm Cutting height: ~100 mm Engine: 35 PS Condition: Gebraucht Location: Tauberbischofsheim, Germany

APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: Workpiece length: 55–170 mm Workpiece height: max. 27.5 mm Workpiece width: max. 28 mm Milling units: 2 Cross-cut saw: 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Technical data: Pitch: ~ 650 mm Cutting width: ~ 170 mm Cutting height: ~ 40 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Motor: 2 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: Cutting height: ~ 145 mm Cutting width: ~ 1,300 mm Cutting length: 3,300 mm Tilt angle: 45° Stop: Digital Adjustment: Electronic Rip fence: Manual Condition: Gebraucht Location: Tauberbischofsheim, Germany

Striebig Automat TRK 6220 AV vertical (floor-standing) panel cutting saw with Schneeberger Positron positioning control for the precise horizontal and vertical cutting of wood-based, plastic and composite panels. Can be freestanding or wall-mounted. The machine operates with manual feed; the automatic feed function is currently not operational. Technical data: Cutting length: 5,300 mm Cutting width: 2,200 mm Material thickness: max. 80 mm Motor: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

roll diameter: 300 mm throat: 450 mm table height: 480 mm saw band length: 3350 mm width of saw-band: 10 mm total power requirement: 2,2 kW weight of the machine ca.: 520 Kg dimensions of the machine ca.: 1,00 x 0,70 x 1,85 m Saw for body parts made of sheet metal, plastic etc good accessibility of the saw blade, guided freehand. Cutting speed infinitely variable up to 1000 m/min Tape welding device IDEAL BS00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300x32x2,5 mm capacity 90 degrees: round: 10-90 mm capacity 90 degrees: flat: 80x10-80 mm capacity 90 degrees: square: 10-80 mm Cutting range at 90 degrees: round - solid materia: 10 - 40 mm Cutting range at 90 degrees: flat - solid material: 40x10-40 mm Cutting range at 90 degrees: square -solid materil: 10- 40 mm turning speeds: 1700/3400 U/min weight of the machine ca.: 600 kg dimensions of the machine ca.: 2590x1910x1910 mm Accessories: -Footswitch with emergency stop -Micro spraying device -HM circular saw blade 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 30 x 50 mm machine weight ab.: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 250 mm capacity 90 degrees: flat: 380x250 mm : 260 mm : 250 mm : 300x200 mm : 180 mm : 170 mm : 200x170 mm : 240 mm : 210 mm : 280x160 mm dimensions of saw-band: 3770x27x0,9 mm : 385 mm speed: 40/80 m/min total power requirement: 1,5/1,8 kW weight: 695 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw band length: 4400 x 34 x 1,1 mm band speed: 15 - 150 m/min capacity 90 degrees: square: 500 x 335 mm capacity 90 degrees: round: 335 mm : 330 mm : 320 x 335 mm : 305 mm : 305 x 335 mm : 180 mm : 170 x 335 mm work height max.: 750 mm machine weight ab.: 1320 kg Motor Capacity: 3 kW dimensions: 1450 x 2350 x 1950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500 x 300 mm capacity 45 degrees: round: 300 mm capacity 45 degrees: flat: 300 x 300 mm : 200 mm : 200 x 200 mm : 60 mm dimensions of saw-band: 4200 x 34 x 1,1 mm : 165 mm min. dia.: 5 mm work height max.: 750 mm total power requirement: 3 kW : 15-150 m/min weight: 910 kg dimensions: 1300 x 2050 x 1400 mm Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high  ...

saw blade diameter: mm cutting diameter: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210x210 mm capacity 90 degrees: flat: 230x185 mm Cutting area at 45 degrees left: round: 150 mm Cutting range at 45 degrees: square: 150x150 mm Cutting range at 45 degrees : flat: 150x210 mm Cutting area at 60 degrees left: round: 90 mm Cutting range at 60 degrees left: square: 90x90 mm Cutting area at 60 degrees left: flat: 90x100 mm dimensions of saw-band: 2450x27x0,9 mm cutting speed: 35/70 m/min work height max.: 915 mm Vice opening: 265 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1550x870x1740 mm Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm ...

: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370x32x3 mm : 15-150 U/min vice: 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 90 mm : 90x90 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm total power requirement: 5,5 kW weight: 615 kg Overall size: 1400x1400x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 65 mm : 50 mm : 83 mm : 82 mm rest piece length: 40 mm : 6 mm dimensions of saw-blade: 250 x 2 x 1.7 x 32 mm speed: 50-200 m/min engine output: 7,5 kW : 200 mm/sec. work height max.: 845 mm dimensions: 2225x1950x1980 mm weight of the machine ca.: 2500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...

capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 140x140 mm capacity 90 degrees: flat: 150x140 mm : 100 mm : 90x90 mm : 100x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 65x65 mm capacity 60 degrees: flat: 65x70 mm dimensions of saw-band: 1735x13x0,65 mm cutting speed: 30-80 m/min engine output: 1,5 kW : 150 mm weight of the machine ca.: 37 kg dimensions of the machine ca.: 900x460x500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: mm cutting diameter: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 4200 x 34 x 1,1 mm capacity 90 degrees: round: 320 mm capacity 90 degrees: flat: 500 x 300 mm : 320 mm : 310 x 310 mm : 200 mm : 200 x180 mm : 280 mm : 300 x 230 mm cutting speed: 18 - 115 m/min total power requirement: 4,5 kW weight of the machine ca.: 1.100 kg dimensions of the machine ca.: 14850 x 2250 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: 350 x 2,5 x 32 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 170 x 90 mm Motor output: 1,8 kW machine weight ab.: 500 kg dimensions: 1200 x 800 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: flat: 200x100 mm capacity 90 degrees: round: 130 mm : 34/68 UpM total power requirement: 2,6 kW height of material-table: 900 mm dimensions of the machine ca.: 1335x865x2175 m weight of the machine ca.: 430 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm : 110 mm : 95 mm : 135x60 mm : 120 mm : 100 mm : 135x60 mm : 180 mm dimensions of saw-blade: 350x32x3,4 mm turning speeds: 1700/3400 U/min weight of the machine ca.: 600 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 5.330 x 41 x 1,3 mm capacity 90 degrees: round: 460 mm capacity 90 degrees: square: 460 mm capacity 90 degrees: flat: 440 x 600 mm Cutting area at 45 degrees left: round: 445 mm : 410 mm Cutting area at 60 degrees left: round: 295 mm Cutting range at 60 degrees left: square: 295 mm table height: 890 mm cutting speed: 25 - 80 m/min total power requirement: 3,75 kW machine weight ab.: 1.500 kg dimensions: 2810 x 1135 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm Motor output: 1,2 kW : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 36 + 72 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2910 x 27 x 0,9 mm capacity 90 degrees: round: 240 mm capacity 90 degrees: flat: 310 x 240 mm : 200 mm : 200 x 200 mm : 200 mm : 200 x 200 mm : 140 mm : 200 x 140 mm rest piece length: 60 mm work height max.: 900 mm dimensions: 800 x 1750 x 1500 mm weight of the machine ca.: 470 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 350 mm dimensions of saw-band: 4640x34,1,1 mm : 355 mm sawband speed: 15-115 m/min weight of the machine ca.: 2800 kg dimensions of the machine ca.: 3050x2190x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370x32x3 mm : 15-150 U/min vice: 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 90 mm : 90x90 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm total power requirement: 5,5 kW weight: 615 kg Overall size: 1400x1400x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350x32x2,5 mm : 15-90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 90x90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 3 kW weight: 685 kg Overall size: 2050x1100x1800 mm turning speeds: 15/90 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3350x27x0,9 mm capacity 90 degrees: round: 260 mm capacity 90 degrees: flat: 300x260 mm capacity 45 degrees: round: 200 mm capacity 45 degrees: flat: 180x180 mm : 130 mm : 120x120 mm : 25 mm min. dia.: 5 mm work height max.: 900 mm : 35/75 m/min weight: 710 kg Standard equipment: - Fast miter adjustment by scale - miter turning point is the point of intersection between saw blade and material system, no changes in the length measure - Manual material tension - at each angular position of the saw frame is the Material stretched parallel in 90 ° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - Machine stand with chip collecting tray - saw blade drive with limit stop - Precise saw band carbide roller guide Additional standard equipment 260  ...

saw blade diameter: 20-200 / 30-300 mm workpiece-spindlehead motor: 0,3 kW grinding wheel diameter: - mm total power requirement: 4 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 4 x 2,5 x 1,5 m No. 1532 Workbench system with 7 saw blade grinding machines and integrated grinding dust extraction system Working width: 20-200 / 30-300 mm Drive power: 0.25/0.3 kW Workbench with base cabinets and various tools Integrated dust extraction for each workstation in the workbench Weight approx. 1100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 275 - 315 mm cutting diameter: 80 - 102 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 1, 5 x 2 m No. 5230 Cold circular saw with additional gearbox for 4 speeds EISELE VMS II - S - PV ( Typ-Nr. 421 ) Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence) Weight approx. 400 kg Working range: Ø 80-102 /flat 160x75/82 Drive: 1,4/1,9 Feed - roller conveyor approx. 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 x 2,5 x 40 mm cutting diameter: Ø 95 / 12590 mm stroke: ca. 100 mm total power requirement: 1,6 / 2,1 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,7 0,6 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: - mm workpiece-spindlehead motor: 0,18 kW grinding wheel diameter: ? mm total power requirement: 0,18 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 0,8 0,5 1,6 m https://www.youtube.com/watch?v=fwZx3rLfIYA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 - 90 m/min total power requirement: 2,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW Speed: 2.800 U/min. Required air-pressure: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider -------------------------------------------------- - Pos. 1: Legend 500 under table miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controlle ...

saw blade diameter: 350 mm cutting diameter: 120 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: flat: 95 x 100 mm turning speeds: 34 / 88 U/min total power requirement: 0,75/1,5 kW weight of the machine ca.: 340 kg. dimensions of the machine ca.: 0,7 x 1,0 x 1,85 m Features: - Coolant system - Replacement saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw -------------------------------------------------- ----------- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z ...

Number of motors: 2 Stück 0: 3000 mm Control: ja/CNC loading dimensions L x W x H: 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Miter Saw Exenso DS350E - 3000 mm -------------------------------------- For wooden glazing beads, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Includes 1 pc. center support. - Pneumatic clamping of the components. - Exenso DS3 positioning control with 15 touch panel display in a dustproof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Manual input of cutting data - Processing of data from a cutting list (data set according to specifications) - Processing of measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB ...

cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2.0 mm cutting diameter: minimum 5.0 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm Control: MEP CNC total power requirement: 2.2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick se ...