saw grinding used for sale

Key data: 500 mm

Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device USB Port Instruction manual Weight: 1400 kg

automatische bandzaag ronde inhoud: 360 mm Capaciteitsvierkant: 360 x 360 mm spanentransporteur Depth of throat: 360 mm Max height of workpiece: 360 mm Table travel : Manual (1) -- hydraulic (2): hydraulic Sawspeed: 20 > 80 m/min Length of band saw: 4420 x 32 x 1,1 mm Power needed: 3,7 kW Length : 2500 mm Depth : 2200 mm Height: 1600 mm Weight: 2 ton

230 V, 2.0 Kw, 50 Hz, 9.6 A, Extraction connection 2x 40 mm, Saw blade 250 mm, Cutting height 80 mm, Cutting width 250 mm, Cutting length, sliding table 2000 mm, Work table 730x830 mm, Boom table 370x470 mm, Boom with hold-down, extendable 2000 mm, Rip fence with angle adjustment, 45° angle adjustment right/left

Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device

Saw blade Ø: 350 mm thereby cutting area Round: 120 mm Square: 100 x 100 mm Rectangle: 170 x 100 mm 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Approx. space requirement: 800 x 700 x 1770 mm

Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement.

-Striebig -Standard II TRK, 5220 A -Year: 1998 -No.: 28351 -was acquired refurbished! Shipping available on request. Sale only to tradespeople. Stated purchase price = Net plus 19% VAT = €13,708.80 Gross

Key data: 420 mm, 170 mm, 115 mm

400 Volt three-phase brake motor Saw blade diameter 420 mm, Saw blade holder 40 mm, Cutting height 170 mm, Saw blade inclined to 45°: cutting height 115 mm , Cutting length 410 mm INCLUDED: Machine can be tilted from the front on both sides via hand crank Additional price for 3 kW 400 volt motor Hydraulic feed brake Laser setup Pneum. Material tension on both sides, from above Carbide circular saw blade 420x3.4/2.4 x40 mm 48 WZ neg Machine stand

PART NUMBER 8006 SPECIFICATIONS - max diameter of the main disc with a scoring scoring rod 350mm - max diameter of the main blade without a scoring rod 450mm - cutting height with the blade in place: 350mm, 100mm - electric adjustment of the main disc up/down + angle - Electric angle display - electric adjustment of the undercut up/down, right/left - spindle diameter 30mm - Spindle locking - with a sliding trolley - cutting length on a trolley 3400mm - cutting width at the guide 1300mm - with sidecar - with an undercutter - max scoring diameter 120mm - spindle diameter 22mm - 0.75kW scoring motor - main motor 5.5kW - 4 types of rotational speed - electronic speed display - Diameter of the extraction port 120mm, 80mm - table top dimensions 1220x730mm - Table top dimensions with widening 1440mm - Table top dimensions with extension 2060mm - shield cover - dim ...

cutting diameter: 360 mm saw band length: 0 mm cutting width: 0 mm cutting speed: 0 m/min total power requirement: 1,0 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 2,2 x 2,05 x 1,5 m Horizontal Bandsaw - Max. Miter Angle: 45° - Coolant System - Emergency Stop - 1300 mm Infeed Roller Conveyor - 2 Spare Saw Blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. saw blade diameter: 530 mm Cutting capacity 90° Round 180mm, Square 170mm, Rectangle 380x70m Cutting capacity 45° left Round 180mm, square 150mm; Rectangle 290x70mm Cutting capacity 45° right Round 180mm, square 150mm; Rectangle 290x70mm Digital degree display for the saw table Turning range of the saw table 180° Spraying device 2-hand operation

Max. saw blade diameter: 350 mm Pneumatic material tensioners Micro spraying device Material feed via 2-hand operation Saw table can be rotated in both directions Length stop and roller conveyor on request

PART NUMBER 7991 SPECIFICATIONS - max blade diameter 400mm - blade hole diameter 30mm - shield cover - Adjustable arm up/down - max cutting height 120mm - max cutting width 540mm - hydraulic saw movement - 3 introductory rollers in the countertop - 3.7kW motor - hydraulic pump motor about 0.55kW - Diameter of the extraction port 110mm - roll width 530mm - machine dimensions l/w/h 1900x1500x1950mm - weight 650kg ADVANTAGES – Polish production – DTR documentation – very good condition – used saw Net price: 13900 PLN Net price: 3310 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Grecon Dimter Opticut S50 Optimizer Material input length max: 5000mm Wood width min/max 20-300mm Wood thickness min/max 10-100mm Packet cutting capability Cutting out material defects CE Certificate

Inv. Num. : 9184 Type: HA 250 W Producer: AMADA Created: 2024 Parameters: Saw blade dimensions: 3505 x 34 x 1.1 mm Weight: 1500 kg

Panel saw manufactured in 2006. This MAYER AL160 features a saw blade diameter of 650 mm and a maximum cutting width of 3200 mm x 3200 mm. It has a main saw motor power of 35 kW and offers variable forward speeds for both the saw aggregate and infeed. If you are looking to get high-quality panel cutting capabilities, consider the MAYER AL160 machine we have for sale. Contact us for further details.

Hacksaw, hacksaw machine, metal hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw, with coolant system and stop -Type: HBS 250/280 -Motor: 0.65/1.0 kW -Cutting speed: 2-stage / 16-32 m/min -Cutting width: 280 x 180 mm -Cutting range at 45 degrees: approximately 180 mm -Cutting area at 45 degrees: square 170 x 200 mm -Saw blade: Length 450 mm - Clamping stock: swivels 45° Machine dimensions: 1300/1100/H1090 mm -Transport dimensions: 1300/600/H1090 mm -Weight: 200 kg

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Quantity: 2 hacksaws available -Price: per piece -Machine dimensions: 1300/640/H1115 mm -Weight: 338 kg

IRION trimming circular saw without cross-cut saw system Saw Blade Fixe ( Electrically Singable ) Cut length 6200 mm Cutting height 150mm Attention: Saw blade electrically "singable" Ready to ship!

Table saw, precision circular saw Manufacturer: Rapid Model; PK-100 Motor: 2.2 KW

Cutting length min./max.: 370mm/5100mm, max. cutting width: 375mm, max. cutting height: 150mm, saw blade diameter: 500mm, saw blade bore: 30mm, swivel range: 45°-90°. Machine dimensions X/Y/Z: approx. 6100mm/1450mm/1450mm, weight: approx. 700kg. An on-site inspection is possible.

Mitre punch - angle cutting machine Manufacturer: Dan-List / Morso Model No.: EH Year of Make: 2008 Fully automatic, electric - pneumatic, 2-hand control Double mitre 45° Single mitre up to 90° Working width max. 100 mm Working height max. 180 mm Cross-section: 70 / 70 mm

Key data: 700 mm

A Behringer HBP 530 is hereby sold, as this is no longer needed if you are interested, please feel free to write to us

Cross-Cut Saw MZ Project CS 1000 Optic Cutting width 1000mm Cutting height 100mm Saw size 550mm Electronic Raising and Lowering of the Pressure Beam Material Automatic material feeding Side discharge of cut material Introductory table length 320cm Receiving table length 255cm Width of rollers in tables 650mm Year of manufacture 1999 Operating pressure 6bar CE mark Machine dimensions 650x190x190cmH Net price

Panel saw manufactured in 2007. This Altendorf F 45 features a cutting length of 3000 mm, a main saw with a power of 5.5 KW, and a maximum main saw blade diameter of 500 mm. If you are looking to get high-quality cutting capabilities, consider the Altendorf F 45 panel saw we have for sale. Contact us for further details.

Includes roller conveyor (approx. 250cm infeed and 120cm with stop) Adjustable stop with scale Automatic clamping and feed Max. saw blade diameter 400mm Miter cut Coolant pump Documentation 400V

Vertical - Band Saw MÖSSNER SM 420 - Roll diameter 420 mm - Projection 410 mm - Workpiece height 265 mm - Saw blade length 3150–3260 mm - Saw band width max. 16 mm - Table size 600 x 600 mm - Working height 1000 mm - Total power requirement 1.1/1.7 kW - Incl. welding device - Incl. grinding device - incl. work light - incl. semi-hydraulic - Weight feed device - Incl. tilting work table - incl. operating instructions LxWxH 0.9x0.9x1.9 meters / Weight 500 kg

KASTO U 10 / Metal circular saw with material support -CE marking -Year of construction 2012 -Cutting area / Round 90 degrees /100x100mm -Cutting area / Flat 90 degrees / 90x90mm -Cutting area / square 90 degrees / 170x90mm -Mitre cutting device -Coolant device -Vise with counter-clamping device for burr-free cutting -Infinitely adjustable saw feed -2x saw cutting speeds -Dimensions circular saw blade 350x2.5x32mm -Saw motor 1.8 KW Dimensions: LxWxH 1.2x0.8x1.9 meters / Weight 500 kg

FORTE SBA 240 - Fully automatic band saw / 2x column-guided -Cutting diameter 250mm -Cutting speed 10-70 m/min -Multiple feed -Saw blade length 3660x27x0.9mm -Total power requirement 3 KW -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2x1.7x1.6 meters / Weight 1000Kg

Optimum 275 N Demonstration Machine Model: Opti S 275 N Technical data: Cutting range 0 degrees round: diameter 225 mm Cutting area 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees round : diameter 160 mm Cutting range 45 degrees: 160x160 mm / rectangle Cutting range 60 degrees round: diameter 100 mm Cutting range 60 degrees: 100x100 mm / rectangle Lifting the saw bracket: manual Feed: infinitely adjustable

cutting diameter: 420 mm saw band length: 5744 x 1,3 x 41 mm cutting width: 420 mm cutting speed: 15 - 110 m/min : 7,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,9 x 2,4 x 2,1 m Hydraulic band saw machine with - Material feed 1000mm - Motorized saw blade tension - Emergency stop device - Replacement saw bands The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 1 x KLAEGER band saw HBA 265 built in 2001 - 1 x KLAEGER band saw HBA S265 built in 2008

A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx.  ...

Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details.

Panel saw manufactured in 2008. This HOLZMA HPP 350/43/38 features a saw blade projection of 80 mm and a cutting length of 4300 mm, providing efficient cutting capabilities. It includes a powerful main saw motor of 13.5 kW and a scoring saw motor of 2.2 kW. If you are looking to get high-quality panel cutting capabilities, consider the HOLZMA HPP 350/43/38 machine we have for sale. Contact us for further details.

saw blade diameter: 225 x 32 mm cutting diameter: max. 70 mm bei 90° mm miter cut: 0°-45°-60° miter cut: 1° Skala spindle turning speed range: 42 / 84 U/min Max. round cutting cross-section at 90°: 70 mm Max. rectangular cutting cross-section at 90°: 80 x 50 mm Max. round cutting cross-section at 45°: 64 mm Max. rectangular cutting cross-section at 45°: 60 x 50 mm Saw blade diameter: 225 mm Bore diameter: 32 mm Includes lubrication system Includes base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel sizing saw Schelling type FH6 330/330 Technical data: Main motor (kW): 27 Scoring Saw Length (mm): 3300 Saw width (mm): 2200 Panel thickness (mm): 40 All information is manufacturer's information

Multi-Rip Saw Kälin CML Type SCA 350 KA-N Built in 1995 Chain width 350 mm Chain with spikes (approx. every second chain link) With 3 laser directional lights Cutting height maximum 120 mm Motor power 22 kW Saw blade diameter maximum 350 mm Saw blade diameter minimum 220 mm Saw blade bore 70 mm Saw shaft 3500 rpm Feed speed 0 – 36 m/min. Maximum passage width 800 mm Feed motor 1.5 kW Operating current 49 A Weight approx. 2,200 kg

Band Saw Bizerba FK 23, completely in stainless steel, with brake, portioning stop, new scrapers and new saw blade, Connection 400V, year of construction 2008, dimensions LxWxH approx. 60x52x85cm, weight approx. 75kg, good used condition, works perfectly

Suitable for simultaneous, automatic grinding of both tooth flanks on carbide-tipped circular saw blades., Accessories:, Motorized rake angle adjustment,, Coolant system,, Automatic central lubrication,, Machine light,, 2 grinding wheel holders,, 1 sawblade mounting bolt., sheet thickness: up to 8 mm, Tooth pitch: 6 to 120 mm, rake angle: - 15° to + 25°, Tangential free angle: 0° to 6°, Radial free angle: - 4° to +6°, Connection value: ca. 1,1 kW (400 V / 50 Hz), Weight: about 1150 kg, Grinding wheel diameter: Max. 125 mm, Bore diameter: 32 mm, Dimensions L x W x H: 1340 x 1400 x 2000 mm, colour: green, Circular saw outer diameter: 80 to 460 mm

Offered is a Thomas miter circular saw for metal profiles, pipes and bar stock. Saw blade diameter: 315mm, saw blade dimensions: 315/2.5/32mm, saw blade bore: 32mm, saw blade speeds: 41/82rpm, miter range left/right: 45°/45°, machine dimensions X/Y/Z: 500mm/850mm/1440mm, weight: approx. 128kg. Inspection possible by appointment.

A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible.

CUTTING . TRIMMING SAW machine for solid wood MZ PROJECT LC 4000 second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. Maximum cutting length: mm.4000 motor power: Hp 15 Total weight: kg. 3.000 volts: 380/50

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm Saw blades cannot be swivelled 2 saw motors Motor power approx. 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2000 mm Weight approx. 1300 kg Shipping dimensions approx. 3900 mm x 1300 mm x H 1200 mm

cutting diameter: 420 mm saw band length: 4870 mm cutting width: 500 x 250 mm table height: 640 mm size of profile - max.: 400 x 400 mm cutting speed: 40 - 120 m/min saw band length: 4870 x 27 x 0,9 mm total power requirement: 3,0 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,0 x 1,0 x 1,5 m Manual band saw Hydraulic saw blade tensioning Hydraulic workpiece clamping Hydraulic saw frame lift/lower Includes 4 spare saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood Band Saw manufactured in 2003. This WOOD-MIZER LT40 features a fully hydraulic system and is powered by a 3-year-old Kohler petrol engine with 1100 hours of use. The total operating hours are 4300, and the saw was fully serviced in 2026, ensuring it is fully functional. If you are looking to get high-quality sawing capabilities, consider the WOOD-MIZER LT40 machine we have for sale. Contact us for further details.

Panel saw Type: T65 Manufacturer: Otto Martin Year: 2017 Available: 10/2026 Min saw blade diameter: 250 mm Max saw blade diameter: 550 mm Parallel ruler cross section: 1350 mm Ruler with stop from the T70 model Table length: 3300 mm Speed: 2800-5000 rpm 2 axis pre-cut Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 5300 mm, 2200 mm

vertical panel saw Cutting dimension max 5300 x 2200 x 80 mm Motorized evasive rear wall Funding Strip attack

Circular Metal Saw manufactured in 2008. This KASTO KASTOspeed C 9 is designed for sawing steel and non-ferrous metals, featuring a cutting range of round ø15-90 mm or 15x15-80x80. It includes a powerful 11 kW saw unit drive motor, enabling cutting speeds of 50-700 m/min. If you are looking to get high-quality sawing capabilities, consider the KASTO KASTOspeed C 9 machine we have for sale. Contact us for further details.

Offer 26171 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.8 / 2.7 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical hydr. Metal Clamping + 2pcs hydr Horizontal Metal Clamp - Coolant device - Feeder – roller conveyor with tray 5000 mm - Discharge – roller conveyor with dimension stop and positioning control 4000 mm - Space requirement approx. W 900 x H 1950 x D 1200 mm - Weight approx. 850 kg