126,701 used machines on RESALE, but how to find them? Machine Search
Brand: Meniconi Putsch Type: CA-75-BR Kind: Sawing machine Assets: 18A Length mm: 4,500 Depth mm: 1,200 (1,900 incl. bridge) Height mm: 3,400 ex. bridge Electrical diagram: Present Other: Has some defects, will be resolved before delivery.
cutting diameter: 225 mm saw band length: 2480 mm cutting width: max. 245 x 150 mm voltage: 230 V power capacity: 1,5 kW dimensions of saw-band: 2480 x 27 x 0,9 mm mitter cutting: 0 - 60 ° cutting speed: 20 - 90 m/min weight of the machine ca.: 185 kg dimensions of the machine ca.: 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Rohb Model: RKA86 Year of Manufacture: 2007 Find more here - / Contact us at -
HWS 702S Rocking circular saw Saw blade diameter 700mm Cutting capacity round timber max. 240mm Logs max. 370 x 240mm Speed 1400 rpm Motor 7.5kW 400V 50Hz LxWxH 1270 x 730 x 1130mm Weight 128kg G&STÜ-5963710
capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 330 mm : 400 x 310 saw band length: 3820 x 34 x 1,1 mm band speed: 22 - 88 m/min table height: 930 mm total power requirement: 2,2 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise The data for this a ...
One-hand adjustable depth of cut control Powerful 800W pneumatic motor "Made in Germany" Stainless steel saw blade cover and depth control Balanced load protects the operator's wrist Robust and low-wear gearbox Adjustable handle for better ergonomics Physical characteristics Weight 3,1 kg Diameter 160 mm Cutting depth 15-51 mm Cutting range 15-51 mm Speed 1225 /min Input Pneumatic Consumption 950 l/min Air pressure 6 bar Inlet air pressure 90 psi Output Pneumatic Power 800 watts 0,9 HP
Integrated electronic motor brake (stops in less than 3 seconds) -One-hand adjustable cutting depth control -R round handle (D-type) -SK spiral cable Physical characteristics Weight 6,3 kg Length 520 mm Width 96 mm Height 194 mm Diameter 180 mm Cutting depth 15-65 mm Cutting range 15-65 mm Drill hole 30 mm Speed 810 m/min Speed 1432 /min Electronic input Phases 1 Voltage 230 V Protection 24 IP Electronic output Power 1050 Watt (50-60Hz)/VA power_power_hp_5060hz 1.4 HP (50Hz)/VA
Key data: 500 mm
Double mitre saw Pertici Type: UNIVER 502D2 Year of Make: 1998 Cutting of aluminium and PVC profiles Cutting length 360 – 6000 mm Cutting width max. 150 mm Cutting height max. 350 mm Saw blade diameter D 500 mm Saw blade revolutions 2800 rpm. Saw blade bore d 30 mm Saw blades swivel from 90° to 45° to 0° Motor powers: 2.2 + 2.2 kW Connected load 4.5 kW, 380 volts 50Hz Automatic feed and cutting process Saw automatically moves to the entered dimension and cuts automatically Control panel with digital display for cutting dimension was used for cutting aluminum square tubes in the Windows and conservatory construction Good working condition, exact cut Dimensions 7200 mm x 1200 mm x H 1700 mm Weight: 1980 kg
Dicing machine DKS 700 DMS Stainless steel Electric power: 1,5kW Voltage: 380V / 50Hz Cutting chamber size: 700 x 200 x 220 mm
Lenght 6 m E355 positioner controller Saw diameter 420 mm
Key data: 425 mm, 145 mm, 120 mm
Saw blade: ø 425 mm Saw Capacity: 145mm Round 120 mm square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Auto. Roller conveyor start: MPS, type 4010, 8 meter range Equipped with: - Semi automatic - Hydraulic clamping - Variable saw feed Country of origin: Germany Motor power: 5.5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm
Key data: 303 mm, 3830 mm
Sawing capacity at 90 degrees: Round: Ø303 mm Square WxH: 360 x 305 mm Sawing capacity at 45 degrees: Round: Ø265 mm Square WxH: 265 x 300 mm Sawing capacity at 30 degrees: Round: Ø175 mm Square WxH: 175 x 300 mm Sawing speed: 20 - 90 m/min. Saw blade: 3830 x 25 x 0.9 mm 3850 x 27 x 0.9 mm Working height: 700 mm Equipped with: - Mitre saws -Semiautomatic - Roller conveyors approx. 8 meters -Operating instructions Country of origin: Germany Motor power: 1.1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg
Lg.Nr. 24029 Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Material replenishment machine - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg
METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...
Code: 0001 Brand: DAN - LIST - DENMARK Model: MORSO Pedal-operated guillotine saw for 45° cutting of both sides of frames Technical data: Max width of the rod to be cut cm 10 Max height of the rod cm 16 Length of the right supporting table cm 80 Pair of steel blades Height of support surface from ground cm 83 Measuring system with 3 millimetre scales Overall dimensions of assembled machine mm 1750 x 550 x 950 h Overall dimensions for transport mm 650 x 550 x 950 h Weight kg 90
Saw blade diameter: 350mm, speed: 3400rpm, cutting capacity at 90°: 120mm/75mm, cutting capacity at 45°: 90mm/65mm, machine dimensions X/Y/Z: approx. 700mm/900mm/1000mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.
Cutting range 90°: round material: 120mm, square material: 100mm/100mm, flat material: 180mm/100mm, cutting range 45° left: Round material: 120mm, square material: 100mm, flat material: 130mm/100mm, cutting range 60° left: Round material: 110mm, square material: 90mm/90mm, flat material: 90mm/100mm, cutting range 45° right: round material: 105mm, square material: 100mm/100mm, flat material: 130mm/100mm, motor power: 2.2kW, saw blade type: HSS 370, saw blade thickness: 3mm, saw blade width: 40mm, working height: 925mm, machine dimensions X/Y/Z: approx. 850mm/1100mm/2100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.
Saw blade diameter: 275mm, cutting range round (90°): 100mm, cutting range flat (90°): 160mm/80mm, speed: 40rpm - 80rpm. On-site inspection is possible.
A Knuth band saw is available. Power: 0.75kW, voltage: 400V, frequency: 50Hz. On-site inspection is possible.
Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible.
Saw blade length: 4330mm-4450mm, dimensions X/Y/Z: approx. 850mm/520mm/1800mm. An on-site inspection is possible.
Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible.
Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible.
Saw blade diameter: 450mm, cutting width: 4mm, saw blade type: HM/HSS, mounting hole: 50mm, fastening screws: 4, pitch circle fastening screws: 80mm, screw diameter: M12. Saw blade feed speed: 3.5m/min, rapid return: 4.5m/min, feed speed: 10m/min/20m/min, cut-off length single stroke: 10mm/1000mm, double stroke: 2000mm, turntable tilt: +/-90°. Machine dimensions X/Y/Z: approx. 2700mm/1450mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.
A Jaespa vertical metal band saw, filing, grinding and polishing machine is available. Roller diameter: 420mm, cutting height: 280mm, cutting width: 405mm, cutting speed: 25m-280m/min, table dimensions X/Y: 600mm/600mm, table inclination left/right: 15°/45°, working height: 955mm, saw blade length range: 3200mm-3400mm, drive power: 1.5kW. Machine dimensions X/Y/Z: approx. 1250mm/1000mm/2050mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.
Cutting capacity 0°: round material: 250mm, square material: 230mm/230mm, flat material: 280mm/200mm. Cutting capacity 45°: round material: 190mm, square material: 180mm/180mm, flat material: 180mm/180mm. Cutting capacity 60°: round material: 120mm, square material: 110mm/110mm, flat material: 110mm/110mm. Sawing speed: 72m/min, saw blade dimensions X/Y/Z: 2950mm/27mm/0.9mm, weight: approx. 370kg. On-site inspection is possible.
Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible.
Saw blade diameter: 275mm, power: 1.9kW, speed: 80rpm, cutting range (flat): 140mm/70mm, cutting range (miter): 100mm/70mm, max. pipe cutting capacity: 3 inches, solid material cutting capacity: 80mm/60mm, square material cutting capacity: 50mm/50mm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1500mm, weight: approx. 300kg. On-site inspection is possible.
Cutting angle (fixed): 45°, max. cutting height: 50mm, max. cutting width: 100mm, max. saw blade diameter: 250mm, machine dimensions X/Y: approx. 500mm/1100mm. On-site inspection is possible.
Saw blade dimensions: 3660mm/27mm/0.9mm, cutting range at 90° round material/flat material: 300mm/385mm x 220mm, saw blade speed: 20m-70m/min, saw blade roller diameter: 450mm, power: 1.5kW, machine dimensions X/Y/Z: approx. 220mm/1500mm/1200mm. On-site inspection is possible.
A planetary saw (inline pipe saw) IPM is available. Max. pipe diameter: 400mm, power: 7kW, machine dimensions X/Y/Z: approx. 4500mm/2000mm/2300mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.
An NC mitre saw Omga S.p.A. is available. Speed: 3000 rpm, saw blade diameter: 300 mm, saw blade bore: 30 mm, max. cutting height: 60 mm, max. cutting width: 60 mm, max. feed: 1250 mm, angle adjustment: 45°/30°/22.5°, machine dimensions X/Y: approx. 5600 mm/1250 mm. Documentation available. On-site inspection is possible.
A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible.
A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.
Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible.
Optimum Opti S 275 G Max height of workpiece: 225 mm Sawspeed: 45 > 90 m/min Length of band saw: 2480 x 27 x 0,9 mm Power needed: 1,1 kW Length : 1360 mm Depth : 510 mm Height: 1690 mm Weight: 200 kg
Semi automatic bandsaw Depth of throat: 500 Max height of workpiece: 335 mm Sawspeed: 15 - 150 m/min Length of band saw: 4400 x 34 x 1,1 mm Power needed: 3 kW Length : 1250 mm Depth : 2200 mm Height: 1900 mm Weight: 1 ton
cutting diameter: 280 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: 1 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting width: 150 mm machine weight ab.: 300 kg : 27468 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 40/80 U/min : 0025 voltage: 380 V clamping: ja kW miter: ja weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
miter: ja clamping: ja kW mechanical: Senkung weight of the machine ca.: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 320 mm saw band length: 4670 mm cutting width: 580 mm total power requirement: 7,4 kW weight of the machine ca.: 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. Infinitely variable settings of sawing feed with display of the current cutting speed. Workpiece counter: Number of workpieces can be preset. Selection swi ...
roll diameter: 500 mm throat: 485 mm workpiece height: mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting length: 2200 mm Cutting height: 30 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wheel diameter: 680 mm sawblade length: 8550 mm Sawblade width max.: 1,3 mm Cutting height: mm Motor output: 20 kW Table dimensions: 600 x 620 mm Feed speed: m/min. Machine height: mm Weight: 10.000 kg Bandsaw horizontal, Precision-Saw for Silicon (Solar industry) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: NA mm cutting diameter: NA mm stroke: mm working area: 90 mm workpiece dia.: 90 x 500 mm feed:: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mm saw band length: 0 mm cutting width: mm workpiece dia.: 150 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal band saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 1060 mm saw band length: 11.430 x 80 x 1,6 mm cutting width: 1,6 mm cutting range: 1060x1260 mm Control: CNC cutting speed: 12-90 m/min power capacity: 11 kW table load: 20 t Cutting Length max.: 6100 mm total power requirement: 20 kW weight of the machine ca.: 21,1 t dimensions of the machine ca.: m Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your vis ...
capacity 90 degrees: round: 172 mm capacity 90 degrees: square: 170 mm : 170 x 170 dimensions of saw-band: 2035 x 20 x 0,9 mm dimensions: 430 x 960 x 520 m band speed: 30 - 80 m/min total power requirement: 1,5 kW weight of the machine ca.: 38 kg SPECIAL PRICE Berg & Schmid - Assembly band saw PBS 171 ESC Powerful and particularly robust metal band saw Aluminum die-cast saw table and infinitely variable cutting speed for Miter cuts up to 60° Optional: machine base type 20508 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: NA mm throat: NA mm workpiece height: mm working area: 200 mm workpiece dia.: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Bandsaw for Butcher The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
