saw grinding used for sale

Motor 1.5 kW/400 V/50 Hz/16 A, table 450x500 mm swivel 45°, wheels saw blade 400 mm, belt guide bottom+top, max. saw height 225 mm, rip fence 450x90 mm, suction nozzle 100 mm, incl. saw blades 2 pcs. 10 mm and 3 pcs. 20 mm, bearings of motor and impellers have been renewed, control and drive belts have been renewed

Key data: 220 mm

MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg

MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.

MACC Metal Circular Saw TRS 315 HSS Circular Saw Blade Diameter 315 mm Double vise, Opening up to 120 mm, Quick release defective mitre cuts left/right up to 45° 2 speeds

MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

ALDURO Metal Band Saw MBS-181 Lowering of the saw arm selectable hydraulic or manual Section cap. round up to 180 mm Motor power 2 kW, 400 V Swivel saw arm 60° L / 45° R Vise opening up to 230 mm incl. coolant device and machine base Weight approx. 195 kg This saw is also optionally available with a 230 V motor

Year: 2020 - technically efficient, ready to work - after full service - automatic feed - disc diameter: 400 mm - cooling system - disc rotation 45/90/135° and tilt 45° - vertical and horizontal pneumatic pressure - compressed air preparation station

Max. saw blade diameter: 350 mm Manual material tensioner Minimum quantity spraying Digital angle display

Cutting length 4100 mm, further data on request

CURSAL TRSI8000 OL700 series parting line consisting of: - automatic loader with 1 column and 3 vacuum suction cups - 6-chain horizontal feeder with singularizer for miter saw - TRSI8000 OL700 cross-cut saw with integrated pusher and length optimizer - CNC sorting discharge belt with 2 ejectors - 2 inclined ways each with 4 idle rollers for side discharge Total overall dimensions about 14 x 5 meters Year 2018, CE regulations, compatibility with industry 4.0 Visible, installed and in operation until August 2025. Delivery availability from September 2025.

Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

STROMAB pneumatic cut-off machine mod. TR 500 – CE standards – used - With 4000mm TIGERSTOP electronic positioning stop - Table with 4500mm infeed rollers - Table with 4500mm outfeed rollers - Blade diam. 500 - Maximum cutting capacity: 360 mm (L) to 60 mm (H) 135 mm (H) to 280 mm (W) - 10 hp motor - 415 volts - Matr. 1377 - Year 2007

Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER

Trak tasmowy Primultini SG1300 ,wozek podawczy CEE IEC,dlugosc wozka 5 metrow

Multi-Blade Saw Costa Leopard S Year: 1981 Cutting height 220mm 2x75hp new conveyor belt, replaced in 2015 Width chain: 370mm Cross conveyor 5 strands

Key data: 150 mm

ALDURO Metal Band Saw MBS-180SK Section cap. up to 180 mm round 4 belt speeds 22 / 33 / 45 / 65 m/min. Vise opening 260 mm Cooling system Hydr. Lowering Motor power 0.75 kW, 400 V Weight approx. 130 kg 0041 62 922 68 28

WEIBERT WJ-K315-A Sliding table saw Format sliding table: 3000mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A

Mobile log saw Pezzolato timmber quenn 600 fully hydraulic diesel engine

Timber saw SAB UVK41 complete line

RAIMANN KR 310 M ProfiRip Board measurement with automatic saw blade adjustment Optimization for the best possible width distribution Quality division of the boards Workpiece data max. cutting width 310 mm Total passage width 800 mm max. cutting height with blade adjustment without pressure screen 115 mm max. cutting height with multi-blade adjustment without pressure screen 130 mm with pressure screen 115 mm min. cutting height 10 mm min. workpiece length 740 mm Pull-out roller / top pressure roller Locking pressure screen Pneumatic pressure rollers Machine data 2-fold saw blade adjustment 4 x Laser Directional Light Cutting Indicator Control model Proficut with Siemens PC Simatic touch panel Control panel mobile Transport chain with spikes – width 340 mm Automatic chain lubrication with oil level monitoring Diameter saw shaft 65 mm Diameter of socket 80  ...

cutting width: 250 mm weight of the machine ca.: 1,3 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...

1 used ACM STAR 700 Vertical Bandsaw New in 2015, as is where is Including Transportdevice

Crawler multirip saw SCM M3 Track width 300mm Cutting height max 120mm Main motor power 25kw Feed speed adjustable on the variator 6-45m/min Disc diameter max/min 350/200mm Minimum element length 600mm 3 rows of anti-recoil pawls Spindle diameter 50mm Sleeve diameter 70mm Central Track Lubrication Extraction spigot 200mm Machine weight 1660kg Machine dimensions 170x150x150cmH Net price

Manufacturer: BIZERBA Type: FK 23 Band Saw BIZERBA Type FK 23 Cutting and portioning of fresh meat with or without bone as well as cutting of long bones, poultry and fish Cutting height 251 mm Cutting thickness 10-190 mm Saw blade speed 17 m/sec Dustbin System for clamping and releasing the saw blade Height-adjustable saw table Protection class IP 55 Voltage 400 V 50 Hz Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Key data: 45 °, 3500 mm, 1350 mm

Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table

Offer 24455 Specifications: - Saw feed via hand lever - Saw blade diameter 315 mm - Largest opening width vice approx. 160 mm - Cutting range approx. at 90° around 100 mm - Flat up to 135 x 80 mm - Cutting range Li + RE at 45° around 108 mm - Flat up to 100 x 80 mm - Cutting range Li at 60° around 80 mm - Flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Key data: 45 °, 2800 mm, 1000 mm

Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable by pneumatic connection high and lowerable Trimming length 2800 mm Speeds: 600/5000/4000/3000 rpm via V-belts Electric swivel with digital display Electric height adjustment with digital display Cutting width 1000 mm 23S9Fmzq rear support table 950 x 400 mm wide Angle stop 2500 mm with extension 2840 mm with 2 stops Suction port 120mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Edging stop

COSMEC twin-shaft multi-blade machine model SMB200 with: – 400mm wide tracks – max cutting width 380mm – max. cutting height 200mm – minimum length of the boards 1000mm – 60 + 60 HP motors, 380 volts – motorized lifting of the presser – variable feed speed from 0 to 30 m/min – blade diameter from 250 to 350mm – pump for track lubrication – total installed power 95 kW – weight about 5000 kg Machine according to CE regulations, year 2002 Notes: The loading and unloading automations that can be seen in the video are not included.

Key data: 45 °, 2150 mm, 1100 mm

Connected load 380V 6.1A 3.8kW Saw blade diameter max. 315 mm Weight approx. 330 kg Length of trimming carriage 2150 mm Speed 4000 rpm Suction nozzle 100 mm Cutting width 1100 mm Angle stop Rip fence

Max. saw blade diameter: 500 mm Infinitely adjustable hydropneumatic saw blade feed Pneumatic material tensioners Weight: approx. 450 kg

Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed

Max. saw blade diameter: 370 mm

Cross-cut line Opticut 150 -4 4 ejections built in 2004

Log band saw Canali Braun 1600 round timber feed wagon saw roller conveyor year of construction.1994 new control

Complete plant Bogli 1600 round timber feed saw wagon roller conveyor shearer

Trennsäge - Splitting Saw Metris MT 817 Year 2003 - Serial-No. 020520P Complete clean and Check Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Horizontale Trennsäge / Horizontal Band Saw Jllig TS 100 V Baujahr / Year 1973 - Serial-No. 959 Arbeitsbreite / Working width max. 590mm Ersatz Sägeblatt / Spare Saw band Stufenlose Höhenverstellung des Sägebandes / stepless height adjustment of saw band Stufenlos regelbarer Antrieb / stepless adjustment drive Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Used, in very good fully functional condition from company closure. Esterer gang saw with many spare parts and at least 40 new and used saw blades. The gate is in good, ready-to-use condition with minimal bearing clearance of 2-3mm incl.: Braun WE158 quick-release carriage, splitting wedge, timber transfer station Heavy-duty roller trestles and various accessories (can be viewed on site) Frame width: 710 mm Passage height: 710 mm Stroke: 500 mm

SKU BS-250M Return Manual Rake angle adjustment Ehrwinkelkopf Grit angle 1 – 60° Motor power 2.2 kW Cutting area 90° rectangular 259 mm x 110 mm Capacity Round 90° x 45° x 60° 227mm / 150mm / 90mm Square capacity: 90° x 45° x 60°, 220 x 220 mm / 144 x 144 mm / 84 x 84 mm Table height 889 mm Strip guide carbide and ball bearings Belt dimensions (H x W x L) 27 x 0.9 x 2470 mm Blade speed 20 - 85 rpm Lowering Control Hydraulic Support Drive Gear Operating voltage 230 V, 50 Hz, 1-phase Delivery weight: 216 kg Shipping dimensions (L x W x H) 1524 x 1118 x 1219 mm

: 36/72 m/min : 285 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm total power requirement: 1,5/1,8 kW Weight: 485 kg Overall size: 1970x1150x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2950x27x0,9 mm : 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm output: 1,5 / 1,8 kW Weight: 440 kg dimensions: 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350x32x4 mm vice: 180 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 2,2 kw weight: 225 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x 32 x 2,5 mm : 15/30/45/90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 1,8/2,5 kW weight: 410 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CUTTING RANGE . MIN 10MM TO 75MM CUTTING LENGTH . 5-900 SINGLE STROKE -9999 REVERSE CUTTING SPEED. 0 - 40 MM SEC. INFINITELY ADJUSTABLE BACKWARDS 135MM/S MATERIAL FEED SPEED . MAX. 350 MM/S Pwrxaerqe RESILIENCE. MAIN CLAMP 10500N

MEP Shark 260 Price 1650 Adjustable gravity lowering Round tube cutting capacity mm. 210mm. at 90° Cutting capacity with square cross-section mm. 200mm. at 90° Cutting capacity other cuts 270x200 mm. Head motor power kw.1.8 Engine revolutions 2 speeds RPM 36 - 72 Strip development diameter 2750 x 25.4 s. 09mm. User Manuals CE Declaration of Conformity Machine weight kg. 350

Technical Parameters Maximum cutting performance Round: 650mm Square 650×800mm Saw blade Speed 20~80 m/min Size 54X1.6 Guidances Tungsten carbide and bearing blade guides Cleaning Wire Brush & Flood Coolant Voltage Hydraulic Power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

For sale is this hydraulic under-sink miter saw with two conveyor belts. Saw table dimensions L 800 mm x W 900 mm x H 800 mm. Conveyor belt behind the saw 1500 x 700 mm, conveyor belt in front of the saw 2500 x 700 mm, distance from the beginning of the belt to the saw 3300 mm, saw blade diameter 500 mm, max. cutting height 120mm, motor approx. 5.5 kW. The saw was completely repaired.

Panel sizing saw with lift table loading HOLZMA type OPTIMAT HPL 380/43/22/L Specifications: • Saw blade protrusion (mm): 95 • Saw carriage feed forward (m/min.): 5 - 130 • Saw carriage feed backwards constant (m/min.): 130 • Program slider speed forward (m/min.): 80 • Reverse program slide speed (m/min.): 80 • In EU countries, a maximum forward speed of 25 m/min is prescribed. • Angular pressure device min. pressure width (mm): 0 • Angular pressure device max. pressure width: complete cutting length • Main saw motor (kW): 13.5 • Scoring saw motor (kW): 2.2 • Collet opening max. (mm): 100 • Working height (mm): 920 • Cutting length (mm): 4300 • Collets: 7 pieces, of which the first 3 pieces are two-fingered, all others are single-fingered • Pitch: 75/275/475/1050/1850/2650/3450 mm measured from angle ruler to center collet Lift table: ...