saw grinding used for sale

Manometer, test manometer, saw tension gauge -Manometer: Saw tension gauge -Type: 0 to 5000 kgs/cm² -Mounting: see photos, bore Ø 16 mm -Dimensions: 70/60/H160 mm -Weight: 1.0 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm -Number of teeth: 176 Z -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Number: 7x saw blades available -Price: per piece -Weight: 10.4 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm -Number of teeth: 264 teeth -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Quantity: 1x saw blade available -Weight: 10.3 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Pilana, saw blade Ø 610 x 7 mm -Number of teeth: see photo -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Number: 3x saw blades available -Price: per piece -Weight: 9.6 kg/piece

Cross-cut saw Dewalt 220 V The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Number: 2x saw blades available -Price: per piece -Weight: 10.5 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.4 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Number: 2x saw blades available -Price: per piece -Weight: 10.6 kg

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Band saw JAESPA AS8 Blade length 5300 - 5500 mm Width 34 mm 16 A 380 V Length 1.50 m Width 1 m Height 2.50 m Tiltable table Speed indicator

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.0 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Quantity: 1x saw blade available -Weight: 10 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.0 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Quantity: 1x saw blade available -Weight: 10,5 kg

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.0 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Quantity: 1x saw blade available -Weight: 10.6 kg

Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT

SPECIFICATIONS: 2 saw blades Ø 250 mm (2.2 Kw each) 2 saw blades Ø 350 mm (2.2 Kw each) Speed: 3800 rpm Machinable length: min. 200 mm-max. 1200 mm With chip transport carpet

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

Radial saw MAGH-OMGA RADIAL 700, engine hp 3 , reach 700mm Not to CE standards, for export

Mitre saw Brand: Graule Type: H8 J2 169 saw blade Ø 250mm swivable saw blade 45 °

Mitre saw Brand: Hebö Type: TA 131 Year: 1999 technical data: adjustable +/- 45° 400 V, 50Hz saw blade Ø approx. 400 mm 2 clamping cylinder extended workpiece support left- / right side each 840 mm 2 stops Note: The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.

Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies

Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics

CATALOGUE NO. 7015 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 350mm - max cutting height 100mm - main dial adjustable up / down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1030mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring motor 0,75kW - main motor 5,5kW - 4 types of rotation speeds 3000, 4000, 5000, 6000, rpm - diameter of extraction connection 120mm, 60mm - table top dimensions 1220x730mm - table top dimension with widening 1220x1150mm - shield cover - dimensions length / width / height 2880x2800x1100mm, - weight 961kg – German production – unpainted – used saw, very good condition Net price: 16900 PLN Net price: 3798 EUR depending on the price 4.45 EU ...

- welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - Powerful, low-vibration motor Cutting length horizontal mm : 5.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 6.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 6300x2990 mm

• Description: Good properties for profile cuts • Stop: 2000 mm • Power: 400V 2.7 A • Dimensions: 3050 x 1550 x 2000 mm • Weight: 2800 kg • Operational since: 6.5.1992 • Accessories: 2000 mm stop

Pipe saw, pipe jigsaw, support jigsaw, reciprocating saw, handsaw, jigsaw -Manufacturer: Fein, pipe reciprocating saw type AST 663 with accessories -Power: 750 W -Stroke rate: 300 /min -Accessories: Transport case, saw blades (see photos) -Box dimensions: 680/400/H350 mm -Total weight: 27 kg

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK 602 VE -Nominal power input: 1000 W -Stroke rate: 800 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 9 kg

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

Width of the feed carpet 300 mm Max saw blade diameter 350 mm min. cutting length 390 mm variable cutting speed, feed carpet speed adjustable 6-48 m/min Power 25,5 kw 35 hp 35 HP

Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning

- technically efficient, ready to work - after full service - motor power: 0,5 kW - disc diameter: 175 x 20 mm, 95 x 20 mm - pneumatic profile clamping

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK ZSK 602 E -Nominal power input: 1000 W -Stroke rate: 700 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 8.6 kg

Sliding table saw Altendorf TRK 45 Year of construction: 1986 S/N 86-9-209 checked in our workshop for normal operating condition Carriage length: 1350 mm Height and swivel adjustment manually with handwheel Motor power: 5.5kW Cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, Blade diameter max mm: 450 ( without scoring machine ) with scoring Automatic engine brake Weight approx. 1100 kg Technical specification subject to change + 2 additional saw blades

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350 x 200 saw band length: 3375 x 27 x 0,9 mm band speed: 18 - 110 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,61 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m SPECIAL PRICE! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade! (saw blade price EUR 204) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)

Circular table saw Elmag with sliding table The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Multi-blade saw Paul type K 34 G 2200 Specifications: • Working width (mm): 2200 • Engine power (kW): 22 • Top rollers: with PU rings • Bottom rollers: corded • Saw shaft: included

saw blade diameter: 250 mm cutting diameter: 50 mm revolutions per minute: 27/54 U/min output: 1,5 kw dimensions: 1,4 x 0,75 x 1,3 m weight of the machine ca.: 0,6 kg Used automatic cold circular saw - 3m roller conveyor - man. lenght stop - Blade hole Ø 32 mm - coolant system - 16 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

White brand sawing machine mod. 360 CNC year 2010 revised in 2019

Lippert inclined diverter Inclined inlet saw feed 45° RA1821 Year of manufacture: 2012 Feed angle: 45° (gusset) Nominal/outer width (NB): 570 mm Usable width (NUB): 500 mm Conveyor speed: adjustable Roller diameter: 50 mm Interroll, hexagon incl. compression spring Drive: 1x Drivecontrol 20 with 24V Material: galvanised steel Centre distance: 75 mm Overall height: 130 mm Transport dimensions: L x W x H = 705 x 570 x 130 mm Features: condition: good (used) Construction year: 2012 angle: 45° nominal voltage: 24V Conveying length in mm: 705 Nominal / outside width in mm: 570 Roll width in mm: 50 Roll division in mm: 75 Driven: YES Engine type: Trommelmotor KW: - Ampere: - Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you ...

Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with extraction

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Special price: Options: Scoring unit with motor 0.75 kW WJ-800105 Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Saw motor 400 V / three-phase / 4.0 kW WJ-800109 Eccentric clamp WJ-500103 Format table L= 2743 mm WJ-800102

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Options at extra cost: Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Eccentric clamp WJ-500103 Scoring unit with motor 0.75 kW

Reciprocating saw, dovetail saw, tiger saw, saber saw -Nominal power input: 700 W -in the suitcase -Dimensions: 570/135/H230 mm -Weight: 10 kg

Saw blade 12 pieces -Various sizes -From: Ø 125 mm to: Ø 180 mm -Package: complete -Weight: 7 kg

Weibert BS-500 Wood band saw Cutting height 450mm Swivel -15° + 45° Motor power: 5KW, 400V, 50HZ Band length 4670mm Suction nozzle 2 x 100mm Saw blade width 6 to 40mm Cutting width left 490mm CE marking WJ-X00200