saw for steel used for sale

stainless steel process tank capacity 0.25 m3 heating jacket thermal insulation stirrer for dense masses

– Capacity 50 tons – Hydraulic – 4 stations – Foot control – Electric backgauge - Emergency stop Ebhzaoz – With 10 stamps (8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm) – Peddinghaus punching recording – Documentation – 400 V

Steel construction - mezzanine, 500kg/m2, floor area approx. 6.440 m2 - used - : Special price ex location: only 350.000.- € (net), incl. disassembly, etc.! Manufacturer: Pro Man Type: Mezzanine Year of construction: 2007 stage load: 500kg/m2 Floor height (upper edge floor covering): 3.462mm Bottom Edge Carrier: 3.230mm Footprint: approx. 92,000 x 70,000mm Stage covering partly chipboard (38mm), partly gratings Accessories: stairs, railings, pallet transfer places, Bottom edge chipboard: white Plan of the stage as PDF on request Condition: very good Available: from about March 2022 Location: CZ

Steel pipe, flush pipe -Diameter: 1020mm -Wall thickness: 14 mm -Length: 5,400 mm with arch -Weight: 352 kg/m

Description: 2 x Stainless Steel Work Tables Dimensions per table: 1020x620x840mm Weight per table: 45kg Approx. Onsite Dimension. (l x w x h): 1,020 x 620 x 840 mm, weight approx.: 90 kg

Description: Stainless steel kitchen equipment - sink , Approx. Onsite Dimension. (l x w x h): 670 x 500 x 1,040 mm, weight approx.: 45 kg

various sizes and thicknesses on 4 pallets, Please note! There are additional costs on this lot, this is €70 per pallet deposit

various sizes and thicknesses on multiple pallets, full plates + leftovers, everything from 1 rack, Please note! There are additional costs on this lot, this is €70 per pallet deposit

various sizes and thicknesses on multiple pallets, full plates + leftovers, everything from 1 rack, Please note! There are additional costs on this lot, this is €70 per pallet deposit

Stainless steel tank standing 10,000 liters capacity, insulation, agitator propeller, approximate dimensions: diameter 2,100 mm, total height incl. feet 4,000 mm, height feet: 500 mm, use so far: milk, price ex works, delivery possible.

Stainless steel tank standing 13,000 liters - 2 pieces in stock, Including insulation and agitator propeller. So far, they have been used for milk production. Approximate dimensions: Diameter: 2,100 mm, height incl. feet approx. 4,000 mm, height feet approx. 500 mm. Price ex works, delivery possible

Stainless steel conveyor screw with geared motor

Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.

MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

Double-walled steel tank. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Max. working diameter round/ square/ flat: 30/ 28/ 30mm, length: 550mm, width: 1050mm, height: 1750mm, weight: 700kg.

Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm

Trough screw, washing screw, screw conveyor used Conveying length: approx. 6500 mm Diameter: approx. 700 mm Slope: approx. 400 mm Wing height: approx. 210 mm Wing thickness approx. 4 mm Stainless steel Geared motor SEW 3 kW 22 rpm 220/400 V Dimensions approx. 7800 x 1800 x 1800 mm The screw can be converted according to your wishes by our own special machine construction. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Overall size: 2160 x 370 x 140 mm Material quality: ~ S235 (ST32) Weight: 850 kg In stock: 2 pieces

There are seven stainless steel tables available, dimensions table 1: 1890x800x960mm, table 2: 1490x800x900mm, table 3: 2150x740x840mm, table 4: 1900x800x960mm, table 5: 2900x1200x910mm, table 6: 2200x700x850mm, table 7: 200x800x940mm.

There are two basins available, dimensions basin 1/ 2: 1600x1300x100/ 1000x1100x1000mm, each with a Pump HYDROSTAL.

There are three identical agitator tanks available, capacity: 10,000l, operating overpressure inner tank/ jacket: -1 to 6/ 6bar, diameter: 2500mm, height: 3180mm, weight: 10.5t, with motor, gearbox, lantern, barrier pressure system and documentation, the tanks were used for 15 years.

There are two identical silos available, capacity: 24m³, width: 3000mm, height: 4750mm, was used for storing polycarbonate.

Capacity: 2173l, diameter: 1500mm, height: 1230mm.

Capacity: 6200l, diameter: 2250mm, height: 2400mm.

Filling height: 1900mm, capacity: 39,520l, width: 3200mm, height: 2000mm, weight: 5.5t.

Hand lever section steel scissors make MUBEA type 5 SN / 10 Rfor sheet metal, flat and bar steelKnife length: 175 mmcuts sheets up to: 10 mmFlat material: 80 x 13 mmRound material: 22 mmSquare material: 22 x 22 mmOutside dimensions with base (without lever): 1400 x 350 x 900 mmWeight without base: 106 kgWith- Undercarriage mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Steel bar shear Fabr. MUBEA-Matic type KFMAV 1300Machine -No: 42982L-profile: 30 x 3 to 180 x 18 mmU-profile: 40 x 4 to 220 mmI-profile: 80 - 220 mmI-PE: 80 - 220 mmFlat iron: 5 x 230 to 180 x 30 mmRound profile: 80 mmSquare profile: 70 mmConnected load: 11 kWExternal dimensions: 2200 x 1000 x 2500 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand lever shears make NOSSEN type ScDH 10Cutting capacity sheets up to: 10 mmCutting capacity flat material: 50 x 15 mmCutting capacity round tubes: 24 mmCutting capacity square: 22 mmCutting capacity L-steel: 60 x 7 mmCutting capacity T-steel: 60 x 7 mmWith- heavy stable base self-builtused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled

We offer you here a used Steel staircase for purchase. Included in delivery are: 01x Steel staircase/ machine step, used Total height: approx. 565 mm Total depth: approx. 600 mm Total width: approx. 950 mm Mesh size: approx. 33 x 33 mm Material color: hot-dip galvanized Step abbreviation: approx. 950 x 300 mm Number of steps: 2 pieces Tread height: approx. 280 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Binder stainless steel mobile vessel, volume 335 l, with isolation jacket, permitted operating pressure inside vessel -1/4 bar, permitted internal vessel operating temperature max.150ºC, test pressure 7.1 bar, 2 sight glases positioned in the lid (diameter 50 & 90 mm), pressure manometer, lid connections for product inlet, ventilation and bleeding, 1 spare connection and CIP-System with spray balls with 360º spraying area, bottom outlet, vessel inner diameter approx. 800 mm, vessel outer diameter approx. 900 mm, total height of vessel approx. 1800 mm, net weight approx. 310 kg, on wheels (8 units available).

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

Conveyor belt Stollen belt Conveyor belt Flat belt, mobile, mobile used Manufacturer: andre zalkin & co Type: ECT Conveying length: approx. 3000 mm Width: approx. 200 mm Funnel approx. 1100 x 1100 mm partly stainless steel Belt channel with Plexiglas cover mobile Foldable Drive with gear motor Total dimensions: approx. 4500 x 1200 x 1200 mm

Size dia 1500x1900mm

Included in delivery are: 01x Steel beam, used Material color: orange Clear width: approx. 2,645 - 2,700 mm Height box profile: approx. 100 - 110 mm Width box profile: approx. 50 mm Note: - The steel beams can be slightly bent, as well as dents or others Have damage. An agraffe is welded on both sides.

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

Blanchierschnecke, Blancheur, Stainless steel, Heating screw, Cooling screw used, Manufacturer: KOMEN & KUIN D.V. Diameter approx. 900 mm, Drum length approx. 6000 mm Stainless steel Double-walled Drive variable gear motor 3 kW 380 / 420 V Total dimensions approx. 7000 x 1800 x 2200 m. the matching feeding screw can be found here. Changes and errors in the technical data and information excepted.

Stainless steel tank, stainless steel tank used Manufacturer: E.S. Planungs-u. Rohrbau GmbH Year of construction: 1994 Volume approx. 9 m³ External dimensions : approx. 2.4 x 2.6 x 1.9 m Changes and errors in the technical data, information and prices as well as prior sale reserved.

Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer

Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive

7,48m conveying spiral, steel, MDB 80, , new Special price ! As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging.

The scope of delivery includes: 88x steel panels, used Manufacturer: SSI Schaefer Material color: hot-dip galvanized for frame depth: approx.: 1,000 mm Width: approx. 298 mm Height: approx. 55/40 mm Material thickness: approx. 1.00 mm Weight / pcs.: 4,11 kg Note: The unit price is only valid for Purchase of at least 88 pieces (1x pallet)