saw for steel used for sale

We offer you used warehouse stage. Technical data of offered camp stage of Nedcon: It is possible to run a stock stage in the following composition: Possible column spacing: 4 m x 4 m, 5 m x 5 m. Height 3895 mm incl. gratings Höhne 3845 mm only with Sigma -Load capacity 300kg / sqm -Base plate which is made of non-slip plate, thickness of the base plate 40 mm -Project prepared according to customer needs. Price for bearing stage only on request available. Please contact us in connection. Price for 1 m² - â?¬70 NET / sqm plus Assembly Prices are net, plus statutory VAT. On request, we can arrange transport throughout Europe. After entering your postcode we will charge you the delivery charge We offer a professional fitting. Mistakes and intermediate sale is reserved! Offer valid until stock lasts. It's used goods. Before you ...

Professional steel shears for tin locksmiths, assembly plants, Teaching work pieces, particularly stable construction stable application with shear encoder made of encoded steel tooth lever translation lever securing via rotary spring knives made of high-quality tool steel, hoisted and ground continuously adjustable holder cuts of sheets, flat steel steel mm: 18 knife length mm: 175 Net weight kg: 47.5 room requirements approx.0.5x0.25x2 m; ready for use

Te Koop: Stainless steel butterfly valve Handbediend. 6 "las las karambir zonder."

Max punching force: 1100 kN Extension: 510 mm Large support table with material flaps on the punchside Electric contact load stop for heare hydraulic holder for profile and flat steel shears with a wide range of tools ; Very good

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use

Maximum punching force: 1100 kN Maximum shear force: 1700 kN punch ing: 510 mm support table hole 31 in 25 mm flat steel: 500 x 22 mm hydraulic holder for the flat steel knife kago n weight: approx. 5000 kg ; Very good

The scope of delivery includes: 01x U-profile, used Material colour: grey Total length: approx. 6,000 mm U-profile dimensions: approx. 50 x 38 mm Material thickness bridge: approx. 5.00 mm Weight / running meter.: approx. 5,49 kg Weight / pcs.: approx. 32,94 kg Note: - In the U-profiles there are 8 - 10 boreholes with a borehole diameter of 11 - 15 mm! - The U-profiles may be slightly bent, as well as small rust or other damage. General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Steel of carrier 12 pieces Length of 7600 mm Height 580 mm Width 210 mm Profiles: Length: 1 x Ã? 90 mm x 7600 mm 2 x Ã? 70 x 7310 mm Height: 9 x Ã? 50 mm x 420 mm 3 x 70 x 50 mm 1 x 70 x 40 mm 2 x 70 x 30 mm 1 x 70 x 60 mm 2 x D 70 x 60 x 30 mm Price: â?¬950 per 1 piece Price â?¬10000 per 12 pieces

S07 - used approx. 20 m³ / 20,000 litres steel tank, double-walled, underground tank, fire-fighting water tank, water cistern. In good condition, double-walled steel tank, lying horizontally, underground storage tank, water tank, diesel fuel tank, heating oil tank. volume: approx. 20 m³ / 20.000 litres material: steel tank length: approx. 6.00 m diameter: approx. Ø 2.00 m weight: approx. 4,0 t Outer side with bituminous insulation or bitumen coating. Used storage container, emptied and professionally cleaned inside. According to the age traces of use are present. Lightest damage and small dents to the insulation due to the excavation process. The tank is fully functional. This steel tank can be used as a storage container for many different media. On demand we can also modify it as a fire-fighting water tank, just ask us. Price upon request. Transport c ...

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Steel grinding machine steels; oscillating grinding machine Producers: REMA Type: SNS 07 Rpm: 1450 / 2900 RPM. 2-speed motor Left and right rotation Connection: 380V / 16A Power: 0.6 / 0.73 KW Wheel size: 175 / 20 mm Fully functional without coolant pump

GS11 - used approx. 40 m³ / 40,000 litres steel tank, insulated container tank with heating coil, former palm oil tank, in good condition. Aboveground storage tank, lying horizontally, insulated container tank, former palm oil tank. Technical details: year of construction: approx. 2007 total tank capacity: approx. 40 m³ / 40,000 litres capacity at max. filling height: 37,000 liters (decrease due to the insulation) dimensions incl. insulation: h 2.10m, w 2.50m, l 9,50m weight: approx. 7.5 t material: S235JRG2, single-walled steel tank with 80 mm of insulation certification mark: Z-38.11-143 tested pressure inside storage space: 2.73 mH2O other: incl. forklift pockets at the tank bottom and crane eyelets on top for transport, incl. inside heating coil. The container is used, has been emptied and professionally cleaned inside. Corresponding to the age there a ...

GS12 - used approx. 26 m³ / 26,000 litres steel tank, gravel filter, pressure tank, water cistern. The container is used and in good condition. capacity: 26.2 m³ / 26,200 litres material: steel tank, pressure tank 6 bar outer dimensions: approx. Ø 2.90 m x height 5.70 m inner dimensions: approx. Ø 2,80 m x height 3.80 m weight: 6 tons output: 42 m³/h year of production: 2000 comm. nr. 22857/3 other: painted blue, threefold epoxy resin coating inside Aboveground pressure tank made of steel, standing vertically on four feet, with two acces holes DN500, one DN300, former gravel filter. Incl. flanged / welded nozzle floor with screwed-in filter nozzles, inner mud funnel, all required connections for untreated water inlet, treated water outlet, backwash in- and outlet and ventilation. This steel tank can be used as gravel filter for filtration, de-icing and  ...

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

GS10 - used approx. 100 m³ / 100,000 litres double-walled steel tank, water tank, firefighting water tank, fuel oil tank. In good condition, horizontally lying storage tank, steel tank, former heating oil tank. capacity: 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616D dimensions: Ø approx. 2.90 m x length 15.8 m weight: approx. 17.0 t manufacturer: Thyssen safety tank bitumen coating outside The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. Minor insulation damage caused by transport may be present. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily.  ...

GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...

Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance ST 37 steel up to approx. 30 x 8 mm -Bending length betw. the adjustable 1000 mm turning units -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Standing cylinder-conical tanks (distrib), fermentation tanks with 2 bar pressure tanks are built and ready for pickup in 35390 GieÃ?en Dimensions: Ã? 3.80 (including ISO) Ã? 12.5 m high insulation: 15 cm

S6 - used approx. 1.5 m³ / 1,500 litres steel tank on wooden skids, double-walled, in good condition. Storage container, water tank, firefighting water tank, diesel fuel tank, heating oil tank. capacity: approx. 1.5 m³ / 1,500 litres material: steel, double-walled diameter: approx. Ø 1.0 m length: approx. 2.1 m overall height: approx. 1.2 m incl. skids The steel tank is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. This container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please ...

Manufacturer: Hinke Model: ATS Sudmo Capacity: 6400 l Pressure tank up to 5 bar

Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

2 with each ca 1000 l  

Preparation of crystal sugar We can offer you a complete system for dissolving and pasteurizing crystalline sugarThe device includes:-Pasteurizer KZE , producer: Schmidt, year: 1997 3-reservoir, double coat (heating-cooling) capacity of one tank: 800 l.dimensions: the height of the tank: 1100 mm, diameter: 1400 mm, total height: 2200 mm

. Retreat-holder for MULTIFIX - recording, size C . threaded steel holder and Knife 60 ° . Price: EUR 430,--+ VAT free within Germany .

Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;

Steel pressure tank, enamelled (last content: fruit juice), operating pressure: 3 bar approx. 16.000 liters used - in very good condition UNI-KINN B-Nr. 19-801 GL Tank with vaulted bottom Operating pressure: 3 bar Measurment and Weight: Diameter: approx. 2.400 mm Total length: approx. 3.700 mm Weight: approx. 3 t on the top: 1 x air vent NW 50 on the front dished bottom: 1 x manhole 400 x 300 mm swiveling 1 x flange connection NW 50 1 x flange connection NW 40 as outlet Otherweise see photos

Stainless steel tank (4 pieces) -single-walled -with cover -outlet valve -on pallets

V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition,  ...

S20 - used approx. 40 m³ / 40,000 litres steel tank, double-walled, coated inside, incl. 2 bases, dome shaft, railing and ladder. technical details: capacity: approx. 40 m³ / 40,000 litres material: steel tank double-walled DIN6616/2 weight: approx. 7 t dimensions: approx. Ø 2.50 m x 8.70 m long Includes 2 bases, a prefabricated dome shaft made of steel in accordance with DIN 6626 as well as a railing and ladder, as shown in the pictures. The dome shaft, the railing and the ladder had to be dismantled for transport and cut off at the top, but are included in the delivery. The customer has to refit and weld these attachments himself on site. Upon request and at additional cost we can also supply a propeller agitator. Used steel storage tank in very good condition, outside painted in silver, coating on the inside, former glycol tank, with 2 dome shafts and connection ...

20,000 liters tank with thermal insulation not used tanks

Pipesdiameter outside 42 mm/ DN 32 = € 3,95/ meter 48 mm/ DN 40 = € 4,25/ meter 60 mm/ DN 50 = € 5,25/ meter 76 mm/ DN 65 = € 6,95/ meter 89 mm/ DN 80 = € 7,25/ meter 114 mm/ DN 100 = € 9,75/ meter 139 mm/ DN 125 = € 11,95/ meter

Transport tank made Hermann Waldner type 4500, in a good used and functional condition. Completely made of stainless steel, 1000 litres of filling volume. Dangerous goods type approval BAM 0301 / 31A. Large lid hatch, bottom drain valve. Mounted on base. Dimensions W/D/H 100/20/175 cm. Further on request.

DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998

Crossing pipes in different lengths and wall strands in stock Price depending on wall thickness and length

Fuel oil tank, diesel filling station, tank plant, service filling station, steel tank with 100,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, the dome lid sanddowns and fit ...

Double-walled stainless steel tank with agitator 1500 Liter YOM 1991

Double-walled stainless steel tank with agitator 1500 Liter YOM 1991

12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65

Steel grinding machine Offer number: 20064 Make: REMA Type: DS 12 ST Machine Number: 108267 Built: 1988 Technical data: - Grinding wheel diameter approx. 125 mm - 2 disc speeds 1450 / 2200 rpm - Right, - Left-hand run - tilting fixed support table ATF 340 x 150 mm - Support table -5° to +15° tiltable - Lighting - Drive 400 V / 0.65 / 0.9 kW - Working height 1000 mm - Space requirement approx. W 850 x H 1150 x D 550 mm - Weight approx. 120 kg

Stainless steel silo standing on foot ring (sugar silo) Content: approx. 118.000 Ltr. Diameter approx. 3,500 mm Total height: approx. 15,750 mm Bulk density 1.0 t/m³ Silo weight: approx. 10.5 tons Last content: sugar Silo in pressure-shock resistant design (resi-roof system), flanged, filter on the side of the silo, silo with lateral segemnt platform and vertical ladder on the coat: 1 filter nozzle side NW1100 with filter 1 NW250 nozzle for pressure equalization valve 1 NW80 tangential filler neck with pipe led down at the bottom of the coat: 1 block flange DN 100 for full detectors 1 jacket hole DN 600 in standing frame: 1 door 850 x 2,000 mm for sale. Price on request Phone 0172 8345457

Two stainless steel tanks with drain. About 1500 l individual was sold

Steel tank with inner coating (glass enamel) can be used above ground or underground Volume: 8.4 m3 Dimensions: 2.20 m x 2.50 m long

Cutting and straightening system Reinforcing steel processing Manufacturer: PROGRESS 2 bending units for the production of brackets. Making straight iron to length. Or straight irons with hangers. Roller conveyor 14 m Hydraulic shears up to 9 m Computer-controlled Software latest version 2019 Good condition. Export/price net ex location S-Anhalt 18,000,-- € I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net. If you don't like the price, please let me know your ideas. I am committed to realizing a price that meets your expectations. I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp) w.goldmannt-online

high-quality stainless steel tanks, standing on feet, made of V4A stainless steel Volume: 12.5 m3 Dimensions R26: 2.35 m x 4.30 m high incl. feet, with cooling grille and insulation Dimensions R25: 2.35 m x 3.10 m high incl. feet Dimensions R24: 2.35 m x 3.10 m high incl. feet

Various steel stairs for industrial plants. Can be used with various processing equipment. Producer: unknown Available: immediately Condition: good, used Steel Stairs dimensions, based on item labels on photos: Item 019-2024.1 Height to top of platform: 105 cm Width of step: 60 cm Width of section at the bottom: 135 cm Loading dimensions LWH: 13560195(adjustable) cm Item 019-2024.2 Width of step: 60 cm Length of section: 180 cm Loading dimensions LWH: 2506060 cm Item 019-2024.3 Width of step: 60 cm Length of section: 155 cm Loading dimensions LWH: 2006060 cm Item 019-2024.4 Height to top of platform: 105 cm Width of step: 77 cm Width of section at the bottom: 206 cm Loading dimensions LWH: 21080195(adjustable) cm Item 019-2024.5 Width of step: 51 cm Length of section: 200 cm Loading dimensions LWH: 2206030 cm Item 019-2024.7 Width of step: 60  ...

Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow

Diesel filling station - service station - Hoftankstelle - Tankstelle 5,000 litres of content - new to the factory - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey  ...

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

Stainless steel round conveyor ring conveyor trough 5850 mm used. Gutters width approx. 120 mm Gutters depth approx. 160 mm Deflection part approx. 800 mm Drive part approx. 900 mm with outlet part Total height approx. 800 mm Engine: SEW 3 kW, 29 rpm. Size approx. 5850 x 900 mm