saw for steel used for sale

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403

Format sliding table: 3200mm Engine power: 400V 5.5 KW (7.5hp) Cutting height: 125mm Saw blade: 300-400mm swivel: 90-45 electrically pivotable and height-adjustable Industrial scoring unit for 120mm scoring saw blade Parallel cutting width: 1500mm

Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.

Equipped with emergency stop, with accessories angle/protractor adjustment

You are responsible for dismantling and transporting this lot. There are no tools available. Incl manifold

Jungjohann Coating format saw blade 302 x 3,2 x 30mm Z=60 sharp

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

table length: 2,900 mm, cutting width: 1,200 mm, Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 1,300 mm, weight approx.: 2,000 kg

Description: Max. diameter of main saw blade: 400 mm Max. cutting height with saw blade at 90°: 125 mm Max. cutting height with saw blade at 45°: 88 mm Speeds of main saw: 3000/4000/5000 r/min LED display Saw carriage dimensions: 380 x 3200 mm Power of main saw motor: 7.5 HP (5.5 kW) Front-zipper blade diameter: 120 mm (Z12+12) Power motor front-zipper: 1 HP (0.75 kW) Speed of presaws: 8000 r/min Cutting width: 1300 mm Manual stop adjustment Mitre guide Manual adjustment of the side guide (saw width adjustment) Manual saw blade tilt adjustment, with digital readout 0-45° Motorised height adjustment for main saw Transport dimensions: 2000x1100x1100 mm and 3320x460x300 mm main motor: 5.5 kW, cutting width: 1,300 mm, Approx. Onsite Dimension. (l x w x h): 3,300 x 3,100 x 1,600 mm, weight approx.: 800 kg

Digital computer control top control; cutting width right 1300mm electrically adjustable conductor; high low oblique electric; can save programs; trolley 320 centimeters; cutting height 152 mm; above protection; saw cap for angled sawing available; material clamp; electric scoring device; support tray lean-to table with fixed mitre stops in top; extendable crosscut fence up to 3700 mm; 2 crosscut fence; roll on outrigger table; The additional costs are for disconnecting power, dismantling extraction and preparing the lot for transport. Extraction material is not included unless otherwise specified.

Miter saw, saw unit right left, double miter saw, cross-cut and miter saw, double end profiler -Double miter saw: saw unit right and left from automatic saw, drill / mill Rapid DGL / BFA -Motor: Himmel 3.0 kW / 2790 rpm -Saw unit: swivels 45 ? -Saw blade: O 410 mm -Price / fee: complete -Dimensions: 1060/760 / H680 mm -Weight: 240 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 420 x 30 mm -Price/delivery: complete -Total dimensions: 1200/800/H690 mm -Total weight: 234 kg

SPECIFICATIONS: Double Circular Saw - 1 fixed saw blade - 1 movable saw blade for special angle cuts Max. working length mm: 1500 Saw blade diameter mm: 250 X - Y Blade Position 2 pneumatic clamping jacks

one used MEP Format S stirup bending machine • Single strand processing wire diameter cold drawn, hot rolled, smooth or ribbed wire from Ø 6 to Ø 12 mm from #2 to #4 fy = 600 N/mm² • Double strand processing wire diameter cold drawn, hot rolled, smooth or ribbed wire from Ø 6 to Ø 10 mm from #2 to #3 fy = 600 N/mm² – ft = 700 N/mm²

General SKU404U1229 LocationBarneveld MakeLudwig Edel No.85 250/1 Year of construction1986 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors ReactorBioreactor Capacity2500 Ltr. (max. 3500 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature-5 °C With propellor stirrercheck (magnetic) Motor1,1 kW Speed mixing shaft1400 rpm Information Mounted on legscheck Floorspace1,84x1,84 m Total height2,22 m Weight1310 kgStainless Steel ReactorsAlbi Alois BinderbergerReactors > Stainless Steel ReactorsBrand > Albi Alois Binderberger What you c ...

General SKU305U615 LocationBarneveld MakeSTC Engineering GmbH TypeReaktor 6500LTR No.6004 Year of construction2005 Pressure Working pressure0.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6500 Ltr. Vessel sizesDia. 2000x2534 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connectionsDN200, DN100, DN50(4x) OutletDN80 Half coil jacketed45,5Ltr Max. temperature-20/160°C With paddle stirrercheck EKATO, Type: HWL2080 Motor7,5kW, 380-420/655-725Volt, 1440rpm (EX) Speed mixing shaft46rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information Total height3,7 m Weight2100 kg CEcheck Floorspace2,3x2,3 m ATEX compatiblecheckStainless Steel ReactorsSTC E ...

General SKU404U1220 LocationBarneveld MakeAlbi Alois Binderberger No.1634 Year of construction1999 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Stainless Steel Reactors ReactorBioreactor Capacity2500 Ltr. (max. 3400 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature130 °C With propellor stirrercheck (magnetic) Motor1.1 kW Speed mixing shaft1400 rpm Information Floorspace1,85x1,85 m Total height2 m Weight1350 kgStainless Steel ReactorsAlbi Alois BinderbergerReactors > Stainless Steel ReactorsBrand > Albi Alois Binderber ...

General SKU404U1218 LocationBarneveld MakeBertsch No.9484 Year of construction1989 Pressure Working pressure0.5 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume12500 Ltr. Motor4 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity12500Ltr (max. 16110Ltr.) Vessel sizesdia. 2500x3776 mm Dished bottomcheck Dished top sidecheck Manholedia. 500 mm Top connectionsDN40, DN25 OutletDN80 (2x) Half coil jacketedcheck (213 Ltr.) Max. temperature100 °C (vessel) With paddle stirrercheck (TMR Turbo) Motor4 kW Speed mixing shaft15-63 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Mounted on legscheck Floorspace2,6x2,6 m Total height4,6 m Weight2050 kgStainless Steel ReactorsBertschReactors > Stainless Steel ReactorsBrand > Bertsch What you can expect from Foeth: -- Machine is in working con ...

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

General SKU394U1151 LocationBarneveld MakeFa. Fritz Pitton KG No.2523 Year of construction1983 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket20 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume4000 Ltr. Motor11 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacitynetto 4000 Ltr. ( bruto 5685 Ltr.) Vessel sizesDia 1800x2500 mm Dished bottomcheck Dished top sidecheck Manholecheck DN500 Top connectionsDia. 200 mm(2x), 150 mm(5x) OutletDia. 100 mm Half coil jacketedcheck 210 Ltr. Max. temperature220°C With propellor stirrercheck Motorcheck 11kW 400Volt. Speed mixing shaft61 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,2x2,2 m Total height4,4 m Weight3100 kgStainless Steel ReactorsFritz PittonReactors > Stainless Steel ReactorsBrand > Fritz ...

General SKU222W212 LocationBarneveld MakeDidier Filtertechnik GmbH No.2190 Year of construction2011 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacitynetto ±550 Ltr. (bruto 700 Ltr.) Vessel sizesDia. 900x1300 mm Dished bottomcheck Dished top sidecheck Top connectionsDia. 50 mm (4x) OutletDia. 30 mm With jacketcheck jacketed outlet valve Half coil jacketedcheck 12 Ltr. Max. temperature110°C With propellor stirrercheck Motor2,2 kW, 220/380 volt, 1400/571 rpm Speed mixing shaft571 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Mounted on legscheck and wheels Floorspace1,0x1,0 m Total height3,15 m Weight600 kg ATEX compatiblecheckStainless Steel ReactorsDidier Fi ...

General SKU268U459 LocationBarneveld MakeBunting Titanium No.F7827 Year of construction1990 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialTitanium Volume1200 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity±1300 Ltr. Vessel sizesDia: 1150x1800mm Conical bottomcheck Dished top sidecheck Manholecheck Top connectionsDia: 47mm(4x), 70mm (3x), 100mm OutletcheckDia: 70mm With jacketcheck With propellor stirrercheck double Motor0,55kW, 230/400 Volt, 675 rpm Stainless Steel Reactors MaterialYttrium, Titanium Beta C, Stainless steel 1.4306 (304L), Titanium Information Mounted on legscheck Floorspace1,5x1,5m Total height3m Weight1300kgStainless Steel ReactorsBunting TitaniumReactors > Stainless Steel ReactorsBrand > Bunting Titanium What you ca ...

Various machines for steel construction and mechanical engineering.

Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

Cheese pan / layered cheese pan / curd tub / drain versatile use Dimensions: Length x Width x Height: 61 x 62 x 81 cm Content approx.: 75 litres Expiration NW: 50

1972, COIL WEIGHT: 32 TON, THICKNESS: 0.8 - 8.0 MM, WIDTH: 1500 MM MAX., MAX. LENGTH OF THE PLATE: 12 000 MM

steel tank 50 m³ / 50,000 litres underground tank / fire fighting water tank / water cistern underground storage in good condition, diesel fuel tank, fuel oil tank volume: 50 m³ / 50.000 litres material: steel tank dimensions: appr. Ø 2,50 m x ca. 10,00 m weight: appr. 8-10 t single-walled, bitumen insulation on the outside The container is in used condition, according to the age there are traces of use. The container can be used as a storage tank for water, liquid feed, whey, molasses, liquid manure, canola oil, seeping juice, AHL/ASL, farm slurry or as rainwater tank, water cistern etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sol ...

approx. 20 m³ / 20,000 litres steel tank, firefighting water tank, cistern In good condition, aboveground or underground storage tank, diesel fuel tank, fuel oil tank volume: approx. 20 m³ / 20,000 litres material: steel length: 6,50 m diameter: 2,00 m weight: approx. 3 to 3,5t The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, slurry, AHL, ASL, canola oil or as rainwater tank, firefighting water tank, cistern etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so  ...

Cat. No. 08-1209 in very good condition! Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

approx. 25 m ³ / 25,000 litres steel tank / firefighting water tank / water container / water cistern / storage container / water tank: good condition content: 25 m³ / 25,000 litres Material: stainless steel tanks, above ground or underground tank Dimensions: approx. Ø 2.00 m x 8.00 m approximately Weight: approx. 6.0 t The tank is repainted from the outside with a bitumen paint, see picture above. The container is used, inside empty and properly cleaned. According to the age traces are present. The container can be used as storage tank for water, manure, AHL, ASL, seepage juice, rapeseed oil, rain collection tank, fire water tank, water tank, water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changi ...

Cat. No. 08-1210 made of V4A - round standing - Condition: good Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

2 pcs available can also be used for other rooms of the food industry Dimensions: Also single for sale per piece 500,00 Euro

Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges  ...

We have 3 pieces of high-grade steel chimneys of the brand Hobatherm on camp model: Hobatherm high-grade steel chimney system Compactly Z-13.1.2-03.2274 Baucert construction year 2004 the chimneys were 2 years in a BHKW in use an application. the height of the chimneys amounts to approx. 20 m and they are provided with an isolation. price each, from camp 6,500.00 ? + VAT

Cat.-Nr. 09-1025 new Standard Features: • Strong Frame Construction • Possible to use as Basis and Intermediate Storage • Movable with Low Lifting Elevating Truck Measurements and Weight: Total Height: 390 mm Width: 760 mm Length: 1250 mm Weight: 27 kg The price is for one barrel. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

The container is factory-new, enstpricht the German Institute for Standardization 6616, owns 2 saddle feet is emptied inside and cleaned and undercoated outside, incl. rise leaders. D = 2.90 m - L = approx. 16.00 m. the container receives a factory-new Kunststoffinninhuelle - continuously to the storage of liquid fertilizer incl. leaky warning device mounts in the protective box. the plastic inside cover owns a Allgemeine appraisial Zulassung Z-65.30-466 and is therefore for the storage of liquid fertilizer AHL as well as reducing agent NOx from 32 (AdBlue) suitably and admitted. the price gets on ex works - freely charged.

P5 used 50 m³ / 50.000 litres steel tank, double wall, above ground or underground tank, on 2 steel bases, good condition Dimensions: diameter approx. 2,50 m (without base) height: 2.78 m high (with base) length: 10.70 m base width: approx. 0.90 m base distance: 7,86 meters DIN6608 D steel tank, coated on the inside with a 7-fold burnt-in varnish. The tank is double-walled and stands on 2 steel bases. the steel tank / container can be used as fire-fighting water tank, storage tank for water, manure, AHL, ASL, seeping juice, canola oil, rainwater collection tank, etc.. We ca modify the tank to suit your needs as well, e.g. as a fire-fighting water tank or as an underground tank fitted with an outer bitumen coating: please ask us. Price upon request. Transport can be arranged at low cost. Item location is 79098 Freiburg im Breisgau. It is not possible to upd ...

Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

Stirring tank 150 l. in stainless steel design, for feeding and/or mixing liquids and solids before grinding, spraying etc., incl. 3,6 kW gear drive , lid with inspection glass, agitator with propeller (200 mm ?, tool coated with oxide ceramics). In very good condition.

23.6 m³ / 23600 litres steel tank coated inside. Munkadur coating, 2-component coating, 2-component Top state coated incl. good reasonably priced - used steel tank from the inside: new coat of paint and new dome cover gasket. Dimensions: Ø x 2.45 m approx. 5.50 m long The tank is with a high-quality food-approved Lined interior fully coated (Munkadur). Steel tank / container can be used as a storage tank for water, Liquid feed, whey, molasses, liquid manure, AHL, ASL, seeping juice, Rapeseed oil, edible oil, rain collection tank, etc. are used. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us ...

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

cylindrical standing single-walled stainless steel container Content 50 litres Material 1.4301 Operating temperature 40 C Propeller agitator kW 0.37, 1.405 rpm the interior of the container is coated with plastic Spout at the bottom center

used approx. 30 m³ / 30000 litres steel tank interior coated double-walled above - ground - 2 steel base - good condition Dimensions: approx. Ø 2.00 m x about 10,00 m of the tank is coated from inside, double-walled and Get up 2 steel bases. Steel tank / container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, edible oil, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

Glazing and cleaning booth in stainless steel, with KSB water pump 2,2 kW, suction fan 3.0 kW (incl. Exhaust tube 600 mm Ø), lighting, turntable and switchgear cabinet. Dismantled, ready for transport.