saw auto used for sale

Z640 Mixed Lot (134 pieces) Feed Pliers Automatic Lathe Lathe Turning Center probably for Index Traub or Schütte or similar machines

Used IWKA TFS 20 aluminum tube filling machine. Year of manufacture: 1989 Capacity: 40-120 tubes/minute Aluminum tube diameter: 10-52mm Supported dose: 2.5-500ml

Mori Say TM626 AC, - 5 axial slides, - 4 cross slides, - double slide pos. 6, - pickup spindle, - swarf conveyor with vibrating filter device, - high pressure coolant system, - set of tool holders, - IEMCA PRA auto bar loader L = 3 m, Country of origin: Czech Republic, Operating hours: 23.950, Number of spindles: 6, Max bar diameter [mm]: 26, Spindle speed [rpm]: 500 - 6.000, Spindle motor [kW]: 20, Total power requirement [kVA]: 40, Weight of the machine ca. [kg]: 5.500, Auto bar loader: Iemca PRA 40/33 P

Inv. Num. : 8570 Type: SU 50 A/2000 Producer: TOS Generated: Parameters: Maximum turning length: 2000 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter via support: 250 mm Weight: 3260 kg Equipment: Digital measurement

Series F2 4-part system: 4 tools engaged at the same time 15 axes System 1: 5 swivels 12 x 12 mm System 2: 8 driven tools (turret system 4) System 3: 16 tools (up to 16 of which are driven) System 4: 8 driven tools (tool turret system 4) C-axis on main spindle + 5° mechanical indexing C-axis on sub-spindle + 5° mechanical indexing up to 37 tools (32 driven)

3-part system: 3 tools engaged at the same time 12 axes 4-fold transverse machining up to 35 tools (26 driven) System 1: 6 turnings 12 x 12 mm or 5 x 16 x 16 mm, 4 driven tools transverse System 2: Y2 axle at the back (3 fixed + 6 driven tools) System 3: 2 x 8 station turrets with up to 16 driven tools C-axis on main spindle + 5° mechanical indexing C-axis on sub-spindle + 5° mechanical indexing C-axis on turret + freely programmable angle adjustment

Built in 1993 semi-automatic hot stamping press Embossing format max. 125 x 280 mm electr. Drive 1 foil preference 1 heating plate automatic feed Unwinding device for round materials / cans Underframe Delivery date: immediately from stock Price on request. We supply and install worldwide.

A precision glass grinding machine Carl Zeiss for pre-grinding optical workpieces is available. Workpiece spindle speed: 125rpm, tool spindle speed: 7000rpm, feed: 6mm/min, roundness and flatness accuracy: +/-0.005mm, swivel range: 50°, permissible repeatability: +/-0.01mm, measured repeatability (1990): +/-0.005mm. Documentation available. An on-site inspection is possible.

Automatic Pile Feeder Multigraf PFA-52 (originally) - Own drive and vacuum pump (230V) - Side-lay register - Modularly expandable and customizable - with extra long feed table Paper format max. 520 x 1050 mm Grammage range up to approx. 500g/sqm The feeder was previously operated in combination with a UV varnishing machine., Year of build: Unknown, Type of control: conventional, Stock location: 75242 Neuhausen DE, Coutry of origin: Switzerland, Delivery time: immediately available, Freight base: free loaded truck

on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request

• For filling and sealing plastic tubes with heating jaws • Manual insertion and removal of tubes, further stations automatic operation • Stations: Filling, heating, sealing with embossing (1-line, max. 8 digits), cutting • Filling range 10-150 ml with piston dosing and rotary slide valve • Output approx. 100-800 tubes/h depending on product and filling quantity • Adjustable heating temperature • 10 tube holder cassettes for tube diam. max. 60 mm • Various tube holders for tube diam. 18, 22, 34, 36 and 40 mm • Electr. connection 220V/50Hz This machine is offered at a special price and sold as-is without technical inspection.

LBBC Autoclave Internal dimensions 1000mmx1500mm Type: Quicklock Thermoclave Heat rating 30kW 6 Vacuum bags Heating ramp 5°C/min, 218psig, 220 Kgs combined materials, Year 2001 Complete with material trolley, associated piping, control panel

Number of spindles 8 Max. bar feed in one station: 130 mm Max. bar feed in two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment: +- 12 mm Max. stroke axial slide: 72 mm Max. stroke tool spindles: 106 mm Adjustment of tool spindles: +- 10 mm Main spindle speed: 500 - 4,000 1/min Piece time: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg

Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available.

Auto stamping machine Friction Feeder and Inkjet Printer Model : KST-PCC100/L15 Zero One Two Three Five Four Seven One Three Four

The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Fanuc Max. turning diameter: ø65mm Max. workpiece length: 300mm Turret head: 2x12 driven positions Bar feeder: IEMCA master 880 MP Cooling + chip conveyor

Features: belt feeder, Ero gluing system (cold glue, 4 nozzles), folding unit, pressing belt, max. sheet size: 60-800x126-1100mm, production possibilities: straight line, crash lock bottom, 4- and 6-corner, double-wall boxes and file covers/piches/envelopes, board thickness: 200-800g/m², corrugated board: N-, E-, F-flute, max. belt speed: 320m/min, shaking speed: 20m/min, main motor power: 11kW, total power requirement: 35kVA, max. air consumption: 0.7m³/min, length: 12,700mm, width: 2600mm, weight: 7t. Operational hours counter: 1494h. An on-site inspection is possible.

package of 16x pieces Find more here - / Contact us at -

Height=1.36 m, Overall length= 1.43 m, Overall width= 0.9 m, Net weight= 325 kg,

Canapa SAP 8 LA strapping machine Fully automatic strapping machine With integrated transport system - photocell-controlled In the SAP-8A/LA fully automatic machines, photocells detect the beginning and end of the package, control the transport unit (driven rollers or belts) and trigger the strapping process. More items - new and used - can be found in our shop! International shipping costs on request!

Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into intermediate sheets of the desired length, directly from the roll. Fully automatic sheeter PAL-Cut 800 sheet dispenser, which cuts intermediate layers quickly and precisely in the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rollers of max. 800 mm width. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 for roll width up to: 800 mm Mounting height: 1,368 mm Working speed: 480 pcs/h Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 More items - new and used - can be found in our shop! International shipping costs on request!

GUK FA 21/4 S2 SVA/730 stand-alone leaflet folding machine, 4 folding pockets, sheet format unfolded: min. 60 x 90 mm, max. 215 x 320 mm, smallest folding 15 mm, recommended paper weight 50-70 g/m², automatic drum suction feeder SVA/730, PCE barcode reader, double sheet control, output up to 460 folds/min., infinitely variable drive, electrical connection 400V/3Ph/50Hz, rated power consumption 1.76 kW, machine footprint approx. 1650 x 1075 mm (LxW), machine height approx. 1470 mm, machine net weight approx. 300 kg, machine in mobile version on wheels

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 171 kg,

Automatic knife sharpener: - Magnetic plate: 1600 mm long x 185 mm wide - Engine: 4 hp (3 kw)

Inv. Num. : 8647 Type: BS12 (AE) - III Producer: TSUGAMI Generated: Parameters: Control system: TSUGAMI MORU MSC 501 Side length: 170 mm Max. turning diameter: 3-12 mm Maximum spindle speed: 12000 1/min Spindle bore: 7 mm Weight: 2200 kg Equipment: Bar Feeder TSUGAMI

Inv. Num. : 8648 Type: BS12 (AE) - III Producer: TSUGAMI Generated: Parameters: Side length: 170 mm Max. turning diameter: 3-12 mm Maximum spindle speed: 12000 1/min Spindle bore: 7 mm Weight: 2200 kg Equipment: Bar Feeder TSUGAMI

Max. rod Ø 20 mm Max. machining length 165 mm Spindle speed 8,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear drilling tool: 8 Speed driven tools: 8,000 1/min

Automatic washing line for IBC containers manufactured by Pohjaranta Oy. Manufacturer: Pohjaranta Oy Finland Type: IBC-PK1 Model year: 2013 Feed conveyor, line of 8 containers Junction station Control center, Siemens Various washing programs, heating of washing water, conductivity Automatic wash / manual program Condition: Slightly used, in very good condition Has been in a warm and in a dry production environment in working condition.

SPECIFICATIONS: Rotary table: Ø 1500 mm Wrapping with stretch film Working height: max. 2900 mm Electronic adjustment Installed power: 3 kW

2 pieces Revolver automatic lathes, Fabr. Index, Type OR with many accessories Specification: Largest diameter 12 mm Number of spindles 6 Number of spindle speeds: 10 pieces Minimum spindle speed 950 1/min Maximum rotation speed of the spindle 7500 1/min Weight of the machine 1 t (for more data see nameplate)

1x INDEX ER25 (built in 1974) with milling device (IRCO bar feeder with weight feed) 3x INDEX 25 (model years 1973-76) 4x INDEX C29 (years 1970-81) 3x INDEX DG12 (years 1972-75) 1x INDEX DG20 (built in 1972/73)

Pallet feeder PFH-82 4 buckles BCUH-78 2 knives Batch counter Anti-noise hood SBP-66-VE delivery (year 2010) 6 folding rollers changed in 2025.

Pallet feeder 4 buckles BCUH-78 2 knives Side buckle Batch counter Anti-noise hood SBP-66+MKE+VE delivery (year 2007) Belt delivery Folding rollers changed in 2021, belts in 2024.

Length : 1430 mm Width : 620 mm Height : 1540 mm Shrink tunnel : (l)850 x (h)600 mm Kind of strap : polypropylène Strap width : 12 mm

Stock# UG6392 Automatic machine for lipstick filling. Manufacturer: Cosmatic (IT) Model: SM-2000 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2023.

BR-G17 18038 Testing Machine Manufacturer: Kirschenhofer Including Yaskawa ERAR-1000-06VX8-E10 robot Camera The Kirschenhofer testing machine type BR-G17 18038 is a specialized device that was developed for automated test processes in industry. It is particularly suitable for quality control of various products and components. Here are some of the key features and functions of this testing machine: Main features of the Kirschenhofer BR-G17 18038: Automation, versatile inspection methods, high speed, user-friendly user interface, robust design, data management.

Order- No.: 153-03 // Ser. No.: 1936 Equipment / Additional information: No. of ups: 3 Max. sheet size, width x length (cm) 1 up / 76 x 30,5 2 ups / 33.5 x 30,5 3 ups / 23.5 x 30,5 Min. sheet size, width x length (cm): 11 x 9.5 with small format equipment: 9 x 6.5 Max. pile height (mm): 150 Min. pile height (mm): 20 Max. speed (m/min): 200 Max. output (piles /h): 1,800 Banderol width (mm): 5 Pressing force (N): 35,000 Infeed height (cm): 40–105

suitable for autoclave diameter 1,100 mm,, can be used in stationary and rotary autoclaves,, made of galvanized steel,, External dimensions L / W / H: approx. 825 mm / 770 mm / 695 mm, Inner dimensions L / W / H: approx. 770 mm / 685 mm / 670 mm

Box format: Length: 100 mm - 400 mm Width: 50 mm - 320 mm Equipment: Standard, right-hand delivery, box material: 200-700 g/m², Box types: normal folding boxes, folding bottom boxes, 4-point erecting boxes, 6-point erecting boxes. Machine can be viewed by appointment while running.

Number of spindles: 6, Max bar diameter [mm]: 20, Spindle speed [rpm]: 500 - 6.000, Weight of the machine ca. [kg]: 5.000, Auto bar loader: CUCCHI BLT Typ MULTI F-6, Model AN / PB20, Version 3,3 M, Working hours: 1996

Horizon AFC-544 AKT, Year 2006 Flatfeeder 4 pockets 1 knife 2 side pockets delivery LCV-54 Etc. Available: at short term

For sale is a Coljan labeler Model No.: ETM Year of Make: 2014 Printer Manufacturer: Zebra Type: ZE500-4 Control: Siemens Condition: good For sale is a Coljan labeler Model: ETM. Year of manufacture: 2014 Printer manufacturer: Zebra Type: ZE500-4 Control: Siemens. Condition: good

Cryovac BL14 Semi Auto bag loader 2020, Stainless, semi automatic bag loader, 1Ph

multi spindle bat automatic, GWM TECH S42-6 AC, automatic bar loader, Cucchi Pietro

max. format 80 x 120 cm Built in 1993 automatic destacker max. stacking height 100 cm Delivery date: immediately from stock Price on request. We supply and install worldwide.

Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

Gildemeister GM42 AC Hirth, - Spindle drum locking by means of a triad of HIRTH-type rings, - Cross slide including drive in pos. 1, 2, 4, 5, - Hydraulic pickup spindle, - Internal flushing for pickup spindle, - Spindle stop attachment for pickup spindle, - Hydraulic slide for rear working with two positions in pos. 6, - Pneumatic part catcher, - Conveyor belt for finished parts, - 5x frontal spindles, rotating, with internal coolant supply, - AC threading device, - Bar feed exclusion device, hydraulic, - Chip conveyor, worm type, including magnetic filter, - High pressure coolant system 100 bar, - CO2 fire fight system Total Walther, Number of spindles: 6, Max bar diameter [mm]: 42, Spindle speed [rpm]: 500 - 2.700, Max. bar feed in one station [mm]: 130, Max. travel of toolspindles [mm]: 120, Max. stroke of cross slides [mm]: 59 (pos. 1, 2) | 52 (pos. 3, 4, 5, 6), Max. stroke  ...

Index MS 16C, CNC-Mehrspindelautomat, - single-NCU mit PCU, HSP Einzelantrieb, - INDEX-Steuerung SolutionLine, - Farbbilschirm 47 cm, - Signalleuchte Smartligth mit LED, - EG-Konform CE-Zeichen, max. Spindeldurchlass 16 mm, Schlitteneinheit 1.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 1.2, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 2.1, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 2.2, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 3.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 3.2, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 4.1, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 4.2, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 5.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 5.2, X-Achse NC-gesteuert, Z-Achse starr, Schlitteneinheit 6.1, Z-Achse NC-gesteuert, Schlitteneinheit 6.2, X-Achse und Z-Achse NC-gesteuert, - ...

Used autoclave made by Spomasz Pleszew, type: WAA 22.