saw auto used for sale

Automat. Bindemaschine / Automatic Binding Bindomatic 9000 Serial-No. 15270002 Dokumentformat DIN A4 Rückenstärke 1,5 bis 15mm Kapazität Bis zu 30 Dokumente innerhalb von 1 Minute Stromversorgung 230 V, 50/60 Hz, 140 W (maximal) Abmessungen 746 x 645 x 43 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

he box labeling machine consists of an Etiprint inline system controlled by the Collamat Monitor. The system is mounted on a stable frame and features a pneumatic applicator with a vacuum plate that automatically applies labels to the boxes. The boxes are transported to the applicator via a conveyor belt. An optical sensor checks the labels, and any defective boxes are sorted into a collection container. The labeling system allows for height and lateral adjustments of the Etiprint and is operated via a control panel. Control: Siemens SIMATIC S7-200.

Machine comes from the Daimler Benz technical center X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Speed range 6,500 rpm Spindle holder SK 40 WZ changer 24-fold Control Siemens 840 D Total power 20 kW Machine weight 5500 kg Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition very good

Used 4-basket autoclave WSA-8 by Spomasz. Year of manufacture 2012. Diameter 1100 mm, acid-resistant design. Diameter 1100 mm. Working pressure 0.4 MPa Calculation temperature 151°C Sterilization temperature max. 132°C Water consumption approx. 400 dm3/8h Steam consumption during the entire cycle approx. 400 kg/h Installed power 5.5 kW Length 480 mm, width 2400 mm, height 2200 mm, weight 2020 kg.

4 Buckles, Electronic knife Digital counter Digital program Belt delivery Free of damages.

- Flat pile stacker - Tremat -Digital control - 1st station with 4 pockets - Cross-breaking station with 2 knives - SAK 56.D mobile delivery

Electronics Module NUM S.A. Type 750 / 760 ( 750/760 ) AUTO V3-24K 200900 mit 200608E Spare Part for Toyoda HES52 ! used, tested !' Dimensions: 263 x 183 x 21 mm

Automatic lubrication, lubrication pump VOGEL MFE 5 / BW3 tank capacity 2.7 l motor: 70 W 220 / 380 V used ! Dimensions: 230 x 130 x 320 mm

Automatic lubrication, lubrication pump VOGEL MFE 5 / BW3 tank capacity 2.7 l motor: 70 W 220 / 380 V used ! Dimensions: 230 x 130 x 320 mm

Automatic lubrication, lubrication pump SCA 0505.0031 tank approx. 2.5 l Motor : 0.09 kW 230 V IP 55 used, tested ! Dimensions: 340 x 270 x 200 mm

Automatic lubrication, lubrication pump SCA 0505.0031 tank approx. 2.5 l Motor : 0.09 kW 230 V IP 55 used, tested ! Dimensions: 270 x 200 x 410 mm

Automatic lubrication, lubrication pump SCA 0505.0031 tank approx. 2.5 l Motor : 0.09 kW 230 V IP 55 used, tested ! Dimensions: 270 x 200 x 410 mm

Automatic lubrication, central lubrication unit, gear pump unit with tank SAXONIA 6.3 l/1 - 0.25 A pn: 1.6 MPa tank capacity approx. 6.3 l motor: 60 W 220 / 380 V with approx. 2 m pressure hose and approx. 10 m connection cable ! used, tested ! Dimensions: 430 x 500 x 470 mm

2013 SEPARFLEX 250 A Automatic water separator Find more here - .ucymachines/ Contact us at - sales@ucymachines

Vertical CNC Machining Center Chiron FZ 08K S Magnum SK with NC swivel head, rotary table package, bar loader, and removal device. - Operating Hours: 30,682 h - Last Spindle Replacement: 10/2021 Technical Data: - Control System: Siemens 840D (PCU 20 / NCU 572.4) - NC Swivel Head: Swivel Range -20° / +115° - Motor Spindle: Water-cooled, 15,000 RPM - Travel Paths: X 450mm / Y 270mm / Z 310mm - Rapid Traverse (X/Y/Z): 75 m/min. / Acceleration X 1g / Y 1.5g / Z 2g - Tool Slots: 40, HSK-A 40, Span-to-Span Time 2.6 sec. vertical Additional Equipment: - Preparation for Bar Processing - Rotary Table Package: AWU 160 with D105mm (Positioning Axis) - Collet Chuck: Hainbuch Spanntop D100 - Additional Device: 6th Side - Handling and Removal Device for Finished Parts - Bar Loader: IRCO SiMag 100.1-3000 (Round and Profile Material) - Flushing Gun - Machine Preparation for IKZ - High Pressure: 7 ...

Manufacturer: KUKA Year of Manufacture: 2006 Model: KR 100 comp Type of Machine : Industrial Robot Find more here - .ucymachines/ Contact us at - sales@ucymachines

Machine Description - Machine Type: 6-Axis Robot - Manufacturer: Martin Systems - Model: RoboCube Maxi - Type: MRC 242499-10 - Fanuc M-20iA - Year of Manufacture: 2019 - Payload: 20 kg - Maximum Reach: 1811 mm - Repeatability: 0.08 mm - Weight: Approx. 250 kg - Dimensions: L 2900 x W 1600 x H 2100 mm --------------------------------------------------------------- Condition of Use - Condition: - Like new, well-maintained, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

MBO folder type T 800 6-4, built 2005. With PIAB air system, Navigator control, steel plate in feeder, serial equipment-slitting shafts and manuals. Configuration: 1. MBO T 800 1-1-78/6: folding unit 1 have 6 pockets that can be automatically adjusted 2. MBO T800 1-2-78/4: folding unit 2 have 4 pockets that are manually adjusted 3 MBO Stream delivery. TESTED. All rollers in very good condition. One auto pocket needs new servo motor. Available immediately. Can ship worldwide.

MBO T530 folding machine with stand up feeding with the following units: 1. MBO T 530 -1 53/4-R 2. MBO T530 -2- 53/4 3. MBO stream delivery table The machine is in production ready condition, with a huge amount of serial equipment such as guides, perforation wheels, etc. Available immediately, can ship worldwide.

Kuka robot LBR iiwa 14 R820 + controller Sunrise Cabinet Including KUKA robot KRC4 SmartPad Control Panel Payload: 14 kg Reach: 820 mm Year of construction: 06/2016 The device can be demonstrated on site before purchase. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Ato Rotopacker 3-tube with autom. Bag feeder Zipper 50/4000. Capacity 2400 bags per hour. On request with dedusting system and other accessories possible.

We are selling a Mitsubishi RV-12SDL industrial robot. It was checked before disassembly and is in good condition. The robot was regularly serviced until it was removed. Included is a Melfa CR2DA-701 controller and a teach panel with touch. Find more here - .ucymachines/ Contact us at - sales@ucymachines

A converted fully automatic strapping machine with a pressing function is being sold. This was converted by us to a GS-41 unit. This not only makes the machine 2.5sec/strapping faster, but also gives a fast E-part delivery. About the GS-41: Dimensions: 519x280x480mm Weight: 71 kg Power connection: 400V/3ph/50Hz Control voltage: 24V/DC Power requirement: 1kW Welding: Vibration welding Welding time: approx. 0.5-1.8sec Clamping time: approx. 0.5-max. Belt type: PP and PET Band width: 10mm-16mm Band thickness: 0.5-1.0mm The control system has also been adapted, and now there is a Siemens S7-1200 in it. The plant has not yet made 20,000 strappings! The machine hourly rate is only 50% compared to a new machine! If I have aroused your interest, please do not hesitate to contact us.

Melfa Mitsubishi RV-12SL A Melfa/Mitsubishi RV-12Sl industrial robot is for sale. It was checked before disassembly and is in good condition. The robot was regularly serviced until it was removed. It comes with a Melfa CR3-535M controller and an R28TB teach panel. Find more here - .ucymachines/ Contact us at - sales@ucymachines

turning diameter over bed: 32 mm spindle turning speed range: 8000 U/min spindle passage: mm turning length: 320 mm Control: Fanuc 0i-TC total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,63 x 1,3 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOLDING MACHINE MBO T 500 4-F -Max paper size 52 x72 cms. -Year 2003, only one onwer -Rollers in excellent conditions -Flat pile feeder -Four combi folding pockets -MC Control FW1 -Anti noise hoods protections -Sheet delivery MBO SA 52 -All manuals, tools and accessories -Available in March

2006 combination folding unit with 6 buckles 2 folding knives pallet feeder FP 120 Navigator Control noise absorbing hood in production available: immediately location: Germany

Used autoclave ASCA, type: 250 E -renewed- - Boiler capacity: 250 litres - Electrically heated - Boiler, core temperature and F-value adjustable - New temperature sensor - New drain hose - Electrics completely checked - Digital control - Auto-signaling - Device on wheels, mobile - Condition: Very good, ready to use The device is in pristine condition and is ready to use right out of the box. Visits and test runs are possible by arrangement.

Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm

6 spindles Tapping Cross drilling Thread Rollers Milling apparatus a lot of accessories Feed motor (spindles) defective! with bar feeder IEMCA PRA 40/32 P

Fully automatic lid labeller for approx. 30 - 35 cycles / min. depending on label length and label - as well as carrier material Specially designed for hazard labels

Manufacturer: Hebrock, Type: HFF 08, Year: 1993, Min.-max. workpiece height in mm: 15 - 50, Edgeband thickness max mm: 3, Machine lenght mm: 800 x 1400 x 1400, Wight approx. kg: 350, Year :1993

Manufacturer: Brandt, Type: Optimat F 13, Work piece width min-max mm: 50, Edgeband thickness max mm: 0,5-3, Edgeband height max mm: 55, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 2 x 0,5, Work piece width min-max mm: 50,

Manufacturer: Brandt, Type: Eckenkopierautomat, Year: ca.1995, Control: hand, Monting of the machine: 1 Fräsmotor mit tastung, Year :ca.1995

Manufacturer: BA, Type: 143, Year: 1992, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Edgeband thickness max mm: 3, Panel length min mm: 250, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 0,5, Trimming saw: yes, Flush/radius/chamfer milling: yes, Machine lenght mm: 1000, Maschine vorführbereit: yes, Year :1992

Manufacturer: Weeke BHH 40 Durchlaufbohrmaschine, Type: BHH 40, Control: Woodwoob, Work piece width min-max mm: 30-800, Min.-max. workpiece length in mm: 250-2200, Min.-max. workpiece height in mm: 12-50, Automatisches Rüsten: yes, Automatic width adjustment: yes, Dowel tools Qty: 4, Dovel diameter mm: 8 X 30, Dovel lenght mm: 30, Min - max dowel centre-to-centre distance mm: 32, Schwingförderer Rohre : 4, Drilling support horizontal: 2, Working range max mm: max.60, Dovel units: 6, Work piece refeeding: yes,

Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

Manufacturer: Stemas, Type: 03 TFRD, Year: 2010, Automatisches Rüsten: yes, Automatic width adjustment: yes, Rotating the workstations degree: 45, Work piece width min-max mm: 30 - 100, Min.-max. workpiece length in mm: 200 - 3000, Min.-max. workpiece height in mm: 16 - 30, Sawing station: 2, Saw blade size mm: 250, Holder mm: 30, Engine power kW: ca. 3,5, rpm spindle speed: 6, Drill supports from behind: 4, rotations controlled: 6000, Manufacturer: Stemas, FREE TEXT: 2017 überholt, Year :2010

Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000

Manufacturer: Koch , Type: BLG, Year: 1992, Control: hand, Program-controlled: yes, Software: 300, Work piece width min-max mm: 200-2500, Min.-max. workpiece length in mm: 10-60, Program: yes, Lochraster: alle 2, Drilling engine kW: 60/80, Working range max mm: 2 von hinten, Drilling supprt from bottom: 2, Drill supports from behind: 7, Work piece refeeding: yes, Taktleitung min: 1, Dovel insertion: yes, Overhauled on: alle Bohrgetriebe drehbar 360 Grad, Year :1992

Manufacturer: Scheppach, Type: DMT 8108, Peak width in mm: ca.1000 mm, Peak height in mm: ca.150, FREE TEXT: kw Leistung 0,75/6 Geschwindigkeiten 370/600/1000/1700/2700 ,

Manufacturer: Koch , Type: Sigma, Year: 1985, Min.-max. workpiece length in mm: 1800, Drilling support horizontal: 1, Bohrgetriebe horizontal Stk.: 1, Drilling supprt from bottom: 1, Bohrgetriebe von unten Stk.: 2, Working range max mm: 60, Raster mm: 32, Number of drill spindles: Horizontal 21 Vertikal 2 x 9, Working range max mm: 60, Manufacturer: Koch , Year :1985

Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,

Manufacturer: Scheer, Type: DB 10, Control: Hand, Drilling beam swivel-mounted: yes, Number of drill spindles: 3, Working length mm: 2200, Lochraster: 22,5, Drilling engine kW: 0,75, Working range max mm: 65, Work piece clamping: pneumatisch, Work stations: 2, Wight approx. kg: 400,

STAR ECAS 32T CNC lathe was built in 2005 in Japan by STAR MICRONICS CO., LTD. The machine, designed for the precise machining of complex workpieces, is used in many industries, such as automotive and aerospace. Its extensive machining capabilities facilitate complex machining processes, such as turning, drilling and threading, both on the front and back of the workpiece. Compared to other lathes available on the market, the offered STAR ECAS-32T swiss-type lathe stands out with the use of 11 axes, two 10-position turrets and two spindles (main spindle and sub-spindle). The extremely rigid design, in turn, provides the incredible process stability which is necessary to achieve excellent precision and quality of the produced parts. All this is complemented by intelligent CNC control, in which even the most advanced work programs are created in just a few steps. The STAR MICRONICS ECAS  ...

STAR ECAS 32T CNC lathe was built in 2007 in Japan by STAR MICRONICS CO.,LTD. The machine, which combines high performance and precision, has been designed to improve the machining of even the most complex workpieces. Its extensive machining capabilities facilitate complex machining processes such as turning, drilling and threading, both on the front and back of the workpiece. This makes the STAR MICRONICS ECAS 32T CNC lathe indispensable in many industries, such as the automotive and aerospace. The STAR ECAS-32T swiss-type lathe is equipped with, among others, 11 axes, two spindles (main spindle and sub-spindle) and capacious turrets that can accommodate many tools for any type of machining. The maximally rigid design additionally ensures incredible process stability, which is essential to achieve excellent precision and quality of the produced parts. The total weight of the machine  ...

Bar diameter 26 mm 12 live tools Turning lenght 180 mm Controller FANUC 16i-TB Spindle speed 12.000 rpm With barfeeder

2 independently working cutting bridges 2 working zones (1750x1000mm each) High-performance vacuum turbine X servo drive; Y and Z axes 2 high-luminosity projectors Windows 7 operating system Calculator with CNC interface, modem and Ethernet card

Inv. Num. : 8328 Type: KMX 732 evo Producer: MANURHIN Created: 2013 Parameters: Control system: FANUC Operating hours: 20723 h Max. rod diameter: 32 mm Number of Spindles: 7 plus 2 pieces Maximum spindle speed: 10000 1/min Spindle bore: 37 mm Spindle stroke: 410 mm Weight: 4500 kg Equipment: Collets Bar Feeder Ducts (21 and 13 mm) Telescopic reduction inserts (inner diameter 21 and 13 mm)