140,951 used machines on RESALE, but how to find them? Machine Search
Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Offer 24149 Specifications: - Cutting range at 90° around 320 mm - flat 300 x 270 mm - Material replenishment stroke up to 500 mm - Unlimited multi-stroke - Remnant length in automatic mode 125 mm - Saw blade dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise -Conveyor - Saw blade cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm
Key data: 350 mm, 100 mm
Automatic with power gearbox also for high-alloy materials.
cutting diameter: 460 mm saw band length: 5334 mm cutting width: 1,3 mm cutting range - square -: 320 x 320 mm cutting range - flat -: 500 x 320 mm control: minipos 807 cutting speed: 16 - 80 m/min dimensions of saw-band: 5334 x 41 x 1,3 mm feed length: 580 mm feed length: multiple: 5800 mm total power requirement: 8 kW weight of the machine ca.: 3,5 t dimensions of machine L x W x H: 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 235 mm dimensions of saw-band: 2480 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 45/90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 400 Volt total power requirement: 1,1 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 750 mm cutting width: 170 x 310 mm cutting speed: 25 - 90 m/min : 130 mm : 130 mm : 205 mm Impact energy: 205 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25078 Specifications: - Cutting range at 90° around 550 mm - flat 570 x 550 mm - Cutting speed infinitely variable 20 to 100 m/min - Hydr. Raising + lowering the saw frame - Cutting pressure infinitely adjustable 0 to 10 m/min - Material replenishment machine - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW -Attack - 2 x roller conveyor 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg
cutting diameter: 315 mm dimensions of saw-band: 3460 x 1,1 x 34 mm cutting speed: 35 / 70 m/min cutting width: 400 x 250 mm : 250 / 280 mm Impact energy: 220 / 280 mm : 180 mm : 140 mm connected load frequency: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 0,6 t dimensions: 2,1 x 1,0 x 1,5 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...
cutting diameter: 280 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: 1 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 saw band length: 5850 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,45 t dimensions of the machine ca.: 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effo ...
cutting diameter: 330 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: square: 320 x 320 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3440 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,71 t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m ACTION PRICE! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip ...
capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 1250x600 saw band length: 8140x54x1,6 mm band speed: 15 - 90 m/min table height: 855 mm total power requirement: 7,5 kW weight of the machine ca.: 4,96 t dimensions of the machine ca.: 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort ...
cutting diameter: 300 mm saw band length: 3320 x 27 x 0,9 mm mm cutting width: 300 mm Control: NC capacity 90 degrees: flat: 330x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm band speed: 15 - 100 m/min total power requirement: 2,2 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically contro ...
new
saw blade diameter: 130 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm capacity 90 degrees: flat: 180 x 100 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: flat: 120 x 100 mm engine: 3,3 / 4,4 KW 0: 1400 / 2800 U/min weight of the machine ca.: 1060 kg dimensions: 2,5 x 1,8 x 1,85 m TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis 60° links auszuführen. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 485 kg dimensions of the machine ca.: 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can b ...
cutting diameter: 280 mm saw band length: 3320 x 27 x 0,9 mm mm cutting width: 330 mm Control: NC capacity 90 degrees: flat: 330x 260 mm capacity 90 degrees: square: 260 x 260 mm band speed: 15 - 100 m/min total power requirement: 2,2 kW weight of the machine ca.: 1,24 t dimensions of the machine ca.: 3,3 x 2,83 x 2,23 m Attention: special price! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min Control: CNC total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-a ...
saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 17 - 70 U/min total power requirement: 3,0 kW weight of the machine ca.: t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m SPECIAL PRICE! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer ...
cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 700 mm cutting width: 250 x 320 mm cutting speed: 25 - 90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 120 mm : 120 mm : 190 mm Impact energy: 190 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adj ...
capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 1250x600 mm capacity 45 degrees: round: 680 mm capacity 45 degrees: square: 600 mm capacity 45 degrees: flat: 870x600 mm capacity 60 degrees: round: 580/550 mm capacity 60 degrees: square: 530/450 mm capacity 60 degrees: flat: 550x450 mm saw band length: 8140 x 54 x 1,6 mm band speed: 15 - 90 m/min table height: 855 mm total power requirement: 7,5 kW weight of the machine ca.: 5,3 t dimensions of the machine ca.: 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new B&S positioning system”. reached. An intelligent N ...
capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 capacity 45 degrees: round: 550 mm capacity 45 degrees: square: 550 mm capacity 45 degrees: flat: 550x600 mm capacity 60 degrees: round: 370 mm capacity 60 degrees: square: 370 mm capacity 60 degrees: flat: 370x600/450 mm saw band length: 7260 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new B&S positioning system”. reached. An intelligent NC contro ...
cutting diameter: 250 mm saw band length: 2950x27x0,9 mm table height: mm band speed: 36/72 m/min total power requirement: 1,8 kW weight of the machine ca.: 440 kg dimensions of the machine ca.: m Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 18 - 100 m/min table height: 890 mm total power requirement: 2,2 kW weight of the machine ca.: 0,99 t dimensions of the machine ca.: 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters suc ...
cutting diameter: 360 mm saw band length: 5050 x 41 x 1,3 mm cutting width: 1,3 mm cutting speed: 15-100 m/min total power requirement: 4 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 3,0x 2,6 x 2,2 m The X-SMART 4 is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm. Other features include: 4 kW drive motor with 41 mm saw blade width Modern 7 touchscreen CNC control Inclined saw frame Solid 2-column structure Linearly guided material sensor Hydraulic cutting pressure regulation 500 mm feed unit Double vise 2 vises in front of and 2 vises behind the saw blade Electrically driven chip conveyor Cleaning gun Full enclosure LED work light Minimum remnant length 100 mm Optionally available: Bundle clamping device, MMS and roller conveyors The data for this ad was created with ModulMWS - the software solution of ...
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 880 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,84 t dimensions of the machine ca.: 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to ente ...
cutting diameter: 225 mm saw band length: 2455 mm table height: 850 mm cutting width: 245 x 150 mm cutting speed: 45/90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 90 mm : 90 mm : 145 mm Impact energy: 145 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,2 t dimensions: 1,43 x 0,72 x 1,7 m Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting range round: 170 mm Rectangular cutting area: 170 x 170 mm Saw blade dimensions: 3000 x 25 x 0.9 mm Belt speed: 150, 355 & 95 m/min Saw drive: 380 V, 0.75 kW kW Space requirement: 1400 x 600 x 800 mm Weight: 340 kg
cutting diameter: 520 mm saw band length: 7239 mm cutting width: 1,3 mm Control: POSIMOD cutting range - square -: 520 x 520 mm feed length: 500 mm feed length: multiple: 4500 mm min. cut-off length: 6 mm length of rest piece min/max: 10 / 100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm sawing motor: 5,5 kW total power requirement: 10,0 kW weight of the machine ca.: 3,8 t dimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 340 mm dimensions of saw-blade: 4860 x 32 x 1,1 mm cutting range square: 340 x 340 mm cutting speed: 17 - 120 m/min drive motor: 4 kW weight of the machine ca.: 2,5 t dimensions: ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Digital display of the dimension preselection Constant, hydraulic clamping of the carbide band guides The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1060 mm
Band saw Kasto HBA 10×12 built in 2007 Cutting areas: Cutting range around 1,060 mm Square cutting area 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 – 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest section length 10 mm Minimum offcut length single cut 20 mm Minimum off-piece length automatic operation 100 mm Table load maximum 50to Travel table 6100mm Total drive power 20 kW Saw motor 11 kW Continuous cutting speed at 50 and 60 Hz 12 – 90 m/min Automatic feed length single 2,100 mm Clamping force machine vise 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material tension: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: by easily replaceable brush, motor-driven ...
cutting diameter: 280 mm saw band length: 4930 mm capacity 90 degrees: square: 280 x 280 mm capacity 45 degrees: round: 280 mm capacity 45 degrees: square: 280 x 280 mm capacity 60 degrees: round: 220 mm capacity 60 degrees: square: 200 x 200 mm feed length: 600 mm feed length: multiple: 5400 mm cutting speed: 17 - 90 m/min length of rest piece min/max: min. 30 mm saw diameter: min. 10 mm control: KASTO, Compact Control total power requirement: 5 kW weight of the machine ca.: 1,75 t dimensions of machine L x W x H: 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm width The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...
cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 230 mm capacity 90 degrees: flat: 230 x 230 mm capacity 90 degrees: square: 230 x 230 mm vice: 235 mm turning speed range:: 15 - 100 m/min dimensions of saw-band: 2950 x 27 x 0.9 mm Control: MEP CNC total power requirement: 3.18 kW weight of the machine ca.: 1175 kg dimensions of the machine ca.: 1980 x 1105 mm Automatic two-column band saw with a footprint of only 2.5 square meters Highest performance in the smallest space Features : - powerful CNC automatic band saw in two-column design for cuts at 0° - with Windows-CE based touch screen control 5.0 - 180° tiltable control panel Up to 100 cutting programs, each with different quantities and lengths Minimizes programming time for frequently executed jobs - 2x operating modes (semi-automatic and automatic) enable efficient cutting under all conditions - Saw head feed via linear guides driven by hydraulic cyli ...
saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 / 110 mm capacity 45 degrees: square: 100x100 / 95x95 mm capacity 45 degrees: flat: 135 x 60 mm turning speeds: 1700 / 3400 U/min Control: MEP CNC total power requirement: 2.6 / 3.5 kW weight of the machine ca.: 605 kg range L-W-H: 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw For cuts from 45° right to 45° left In aluminum and light metal alloys - MEP microprocessor control Simple user interface with display and mechanical buttons Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp Pneumatic clamping system allow ...
The machine is from the year of construction 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round – 75 mm Rectangle – 60 mm Saw blade dimensions approx. ø 285 x 2.0 (D) x 1.7 (t) mm T = Waste; t = strength ; Hole 32; 4x11 at 63 mm Blade speed inverter monitors 30- 150 rpm Blade motor 7.5 kW Hydraulic system 1.5 kW Coolant system Oil mist lubrication Blade feed system servo motor and ball screw Material support 1,200 x 5,200 mm Bar feed: servo motor and ball screw Automatic index single stroke 6 – 600 mm Multiple stroke up to 3,000 mm Automatic Chip Conveyor Chain Conveyor Machine weight, incl. table 2,800 kg Length tolerance +/- 0.1 mm Cutting accuracy +/- 0.1 mm Remnant Standard 75 mm Loading capacity 13 x ø 75 mm rods Max loading width. 1,000 mm Accessories: Chip conveyor, air purification, loading magazine (still under power ...
Key data: 280 mm
Specifications: Maximum diameter 280 mm Maximum dimensions rectangle 300×280 mm Maximum dimensions bundle 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre roller table, a chip conveyor, a variable clamping force control, a double-retractable index chuck, a work light and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Infinitely adjustable belt speed, controlled by an inverter Impeller motion detector with saw blade blocking and band break switch Shuttle automatic feed and sliding work table with castors Hydraulic Belt Tension Two-stage lifting clamping devices Split front screw clamp Double-retractable index screw clamp Working height se ...
Key data: 670 mm
Cutting range 90° 670 x 670 Specifications Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: infinitely variable: 15–120 m/min Cutting speed: infinitely adjustable: 5–1200 mm/min Belt drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Index speed: 200 mm/s Minimum saw diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg
cutting diameter: 520 mm saw band length: 7239 mm cutting range square: 520 x 520 mm feed length: 500 mm feed length: 4500 mm cutting length min.: 6 mm : 10/100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm weight of the machine ca.: 4,2 t dimensions: 2300 x 3420 x 2385 m Control: MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m Unused display machine 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In add ...
Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg
I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.
cutting diameter: - mm saw band length: - mm cutting width: - mm table - swivable: ja Grad weight of the machine ca.: 200 kg dimensions of the machine ca.: - m with welding equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
miter: ja cooling: ja weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...
GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. ...
maximum number of results exceeded
please refine your search
