saw ari used for sale

Panel saw manufactured in 2008. This HOLZMA HPP 350/43/38 features a saw blade projection of 80 mm and a cutting length of 4300 mm, providing efficient cutting capabilities. It includes a powerful main saw motor of 13.5 kW and a scoring saw motor of 2.2 kW. If you are looking to get high-quality panel cutting capabilities, consider the HOLZMA HPP 350/43/38 machine we have for sale. Contact us for further details.

Diehl straight line rip saw Model SL-52 wide arm 54" between saw blade and column glue line quality

Multi-Rip Saw Kälin CML Type SCA 350 KA-N Built in 1995 Chain width 350 mm Chain with spikes (approx. every second chain link) With 3 laser directional lights Cutting height maximum 120 mm Motor power 22 kW Saw blade diameter maximum 350 mm Saw blade diameter minimum 220 mm Saw blade bore 70 mm Saw shaft 3500 rpm Feed speed 0 – 36 m/min. Maximum passage width 800 mm Feed motor 1.5 kW Operating current 49 A Weight approx. 2,200 kg

Band Saw Bizerba FK 23, completely in stainless steel, with brake, portioning stop, new scrapers and new saw blade, Connection 400V, year of construction 2008, dimensions LxWxH approx. 60x52x85cm, weight approx. 75kg, good used condition, works perfectly

saw blade diameter: 400 mm cutting diameter: 130 mm capacity 90 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 220 x 80 mm feed length: 600 mm feed length: multiple: 1800 mm cutting speed: 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of machine L x W x H: 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a Thomas miter circular saw for metal profiles, pipes and bar stock. Saw blade diameter: 315mm, saw blade dimensions: 315/2.5/32mm, saw blade bore: 32mm, saw blade speeds: 41/82rpm, miter range left/right: 45°/45°, machine dimensions X/Y/Z: 500mm/850mm/1440mm, weight: approx. 128kg. Inspection possible by appointment.

Height=1.33 m, Overall length= 1.63 m, Overall width= 0.71 m, Net weight= 168 kg,

A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible.

IRION Manual Pendulum Saw Adjustment 45° + / - 160 mm cutting thickness Suction connection Motor 7.5 KW Top condition! Immediately available from location

For logs / logs, the BBS750 machine is a loyal partner. The performance of the sawmill depends on the thickness of the planks and beams. However, the average volume throughput can be estimated at 1-1.5 cbm/h. The Bockbandsäge Bochsäge sawmill is used by forest farmers and other wood processors and is used as an entry-level saw. Technical data: - Weight: approx. 600 kg - Machine dimensions: width approx. 220cm - height approx. 170cm  - Total length:600cm (in standard version but also extendable) - Cutting length: 480cm - Main motor power: 5.5kW - Power requirements:

Nikmann Log Band Saw, Model HBB 550 L Maximum cutting diameter: D 550 mm max. board width 530 mm max. cutting length our standard 6 m Track length 6.9 m Maximum saw blade stroke: 540 mm Minimum saw blade height from track: 20 mm Saw blade dimensions: 3200 x 27 x 0.9/1.0 mm Recommended band saw blade FB for softwood X Cut with every 3rd tooth with stellite Maximum cutting thickness: 220 mm Cutting length: 6 m, expandable in 2.3 m increments Minimum cutting length: 0.9 m Engine power: 4 kW/5.5 hp Flywheel diameter: 400 mm Flywheel width: 25 mm Saw blade dimensions: 3200 x 27?33 x 0.9

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Circular Saw Milling Machine  Machine stand can be moved with pallet truck  Front-facing operation  Front sliding slide lock  Bevel cuts with tiltable stop on the carriage  Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle  Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg  Other technical

Automatic Pneumatic Workpiece Clamp  Cutting height 280 mm at 90 Cutting height 140 mm at 30 mm Engine power 11KW/15hp Separating cuts Mitre cuts  Schifter cuts, longitudinal sections  Throat rafters, eaves planks, Burrs, cutting wedge planks Roller conveyor strong version right  incl. roller table and longitudinal stop L=2500 mm side-movable Roller conveyor strong version left  incl. roller table and longitudinal stop L=2500 mm side-movable

CUTTING . TRIMMING SAW machine for solid wood MZ PROJECT LC 4000 second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. Maximum cutting length: mm.4000 motor power: Hp 15 Total weight: kg. 3.000 volts: 380/50

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm Saw blades cannot be swivelled 2 saw motors Motor power approx. 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2000 mm Weight approx. 1300 kg Shipping dimensions approx. 3900 mm x 1300 mm x H 1200 mm

Wood Band Saw manufactured in 2003. This WOOD-MIZER LT40 features a fully hydraulic system and is powered by a 3-year-old Kohler petrol engine with 1100 hours of use. The total operating hours are 4300, and the saw was fully serviced in 2026, ensuring it is fully functional. If you are looking to get high-quality sawing capabilities, consider the WOOD-MIZER LT40 machine we have for sale. Contact us for further details.

Manufacturer: Homag Model: HQP Type of machine: Crosscut saw with deep-cut saw Year of manufacture: 2011 Condition: Used, excellent condition, very well preserved and carefully maintained, ready for use Status: Disassembled and ready for immediate loading Cutting length: 1600 mm Program slide travel: 5600 mm Number of collets: 4 Maximum feed rate: 150 m/min Saw blade projection: 125 mm Main motor: 13.5 kW Scoring unit: Yes Storage sheet length: 10 m Storage sheet width: 5 m Accessories: Includes a small Bargstedt storage unit for conveniently placing worktops during transport Find more here - .ucymachines/ Contact us at - sales@ucymachines

Panel saw Type: T65 Manufacturer: Otto Martin Year: 2017 Available: 10/2026 Min saw blade diameter: 250 mm Max saw blade diameter: 550 mm Parallel ruler cross section: 1350 mm Ruler with stop from the T70 model Table length: 3300 mm Speed: 2800-5000 rpm 2 axis pre-cut Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Max. diameter of the cut material ... 300mm Control Siemens ... Simatic S7-1200 Machine weight ... 1420kg L x W x H ... 2600x2080x2140mm The machine is in good condition. if possible under power.

Circular Metal Saw manufactured in 2008. This KASTO KASTOspeed C 9 is designed for sawing steel and non-ferrous metals, featuring a cutting range of round ø15-90 mm or 15x15-80x80. It includes a powerful 11 kW saw unit drive motor, enabling cutting speeds of 50-700 m/min. If you are looking to get high-quality sawing capabilities, consider the KASTO KASTOspeed C 9 machine we have for sale. Contact us for further details.

CONTROLS   NC controls SIEMENS S7 TECHNICAL SPECIFICATION   max. diameter of saw blade: 460 mm   cutting capacity round: 146 mm   cutting capacity square: 138 mm   mitre cutting: no   .. oblong: 250 mm   .. .. x: 100 mm   .. to: 220 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1950 mm   total height: 2000 mm   total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

roll diameter: 400 mm throat: 400 mm workpiece height: mm table-size: 610 x 500 mm saw band length: 2780 - 2980 mm turning speeds: 22 - 147 m/min total power requirement: kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,6 x 0,8 x 1,9 m Bandsaw with - Ideal welding unit - Grinding unit - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 235 mm dimensions of saw-band: 2645 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 0 - 90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 230 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double-miter band saw - Variable speed control - Miter cuts up to 60° left and 45° right - Vise with quick-clamping mechanism - Blade tension monitoring - Automatic electric cooling system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel saw manufactured in 1999. This HOLZMA HPV11 features a maximum panel dimension of 2,100 x 4,100 mm and can cut up to 6 panels simultaneously. It includes lifting tables and a Liftomat, along with an automatically height-adjustable clearing table. If you are looking to get high-quality cutting capabilities, consider the HOLZMA HPV11 panel saw we have for sale. Contact us for further details.

Key data: 45 °

TECHNICAL DATA: Table dimensions: 1100 x 1100 mm Saw blade: Ø 350 mm Saw blade inclination: 0 – 45° Installed power: 5.5 kW INCLUDED IN DELIVERY: 01 3-roller drive with speed controller

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of angles between 45 and 90 degrees Digital Angle Displays Feed via 2-hand operation Roller conveyors and length stops on request Weight: approx. 1,000 kg

Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: 900 kg Rear feed width: mm Cutting length: 5300 mm Motor output: 4,6 kW Cutting height: 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 0-45° ° Length of the rolling table: 3.000 mm cutting width: 1.100 mm Motor output: 5,5 kW Cutting height: 170 mm Cutting height at 45°: mm Saw blade diameter: 250 - 500 mm Speed: 2.800/4.000/5.500 U/min. weight of the machine ca.: 1.950 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: - Saw blade dimensions up to 300 x 2.0 x 40 mm - 2 saw blade spindle speeds 40 + 80 1/min - Cutting range at 90° around 100 mm - flat 120 x 85 mm - Mitre adjustable on the left up to 45 ° - right up to 30 ° - Material vise - Drive 400 V / 1.0 / 1.2 kW - Space requirement approx. W 600 x H 800 x D 700 mm - Weight approx. 180 kg

An automatic Kasto horizontal band saw is available. Cutting diameter: 330mm, Cutting capacity X/Y: 330mm/350mm, Material feed length: 500mm, Min. cut-off length: 10mm, Min. cutting diameter: 10mm, Min. remnant length (automatic mode): 60mm, Cutting speed: 150m/min, Saw blade dimensions X/Y/Z: 5090mm/41mm/1.3mm, Material support height: 700mm. Machine dimensions X/Y/Z: approx. 1350mm/2400mm/1850mm, Weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Expected to be available starting August, 2026.

Manufacturer: Fom Type of machine: Sawing machine combined with a cutting line system MIRAGE 600 L Sawing Machine - Model: MIRAGE 600 L - Code: XZ-10825 - Year of manufacture: 2021 - Tool speed: 2880 rpm - Maximum tool diameter: 600 mm, hole 40 mm - Electrical features: 3-phase, 400V, 50Hz - Consumption: 10 kW, 550 NL per minute - Maximum weight: 850 kg LT 600 Cutting Line - Model: LT 600 - Year of manufacture: 2021 - Electrical features: 3-phase, 400V, 50Hz - Consumption: 11 KN, 550 NL per cycl Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 380 mm

Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the sawing unit with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

This 3-axis SCHÜCO PDG E CUT was manufactured in 2009. It features a maximum saw blade diameter of 600 mm and operates at a motor speed of 2410 min⁻¹. The machine includes a discharge conveyor belt and an extraction system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the SCHÜCO PDG E CUT double mitre saw we have for sale. Contact us for further details.

Cutting length: 4.300 mm Cutting height: 1.800 mm Motor output: kW Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: ca. 600 kg kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible.

Sliding table saw Martin T 65 Heavy precision sliding table saw 3.5" LCD color screen Motor 5.5 kW Saw blade tiltable 0 - 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm Parallelogram transverse stage, for inclination on both sides up to 46°, LCD displays, 0.01° fine adjustment for cutting angle Analogue length stop with 2-point system Trimming length 3,000 mm Cutting width with rip fence 1,100 mm Width stop adjustment via handwheel Reading width stop via control CE version Machine is WORKSHOP overhauled in TOP condition from small business ex location 

Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details.

A vertical cold circular saw Behringer Eisele with material support on the left and right is available. Saw blade dimensions X/Y/Z: 350mm/3mm/40mm, speed: 68rpm, max. cutting capacity for flat material X/Y: 170mm/100mm, max. cutting capacity for square material X/Y: 100mm/100mm, max. cutting diameter: 120mm, machine dimensions X/Y/Z: approx. 1050mm/800mm/2200mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

ADIGE TT640 circular sawing machine was built in 2009 in Italy by ADIGE S.p.A. The machine enables precise, automatic cutting of a wide range of metal workpieces, such as bars, tubes and profiles. Solid, square and rectangular sections are machined by means of a cutting disc with a maximum diameter of 275 mm. It ensures high repeatability and cutting precision in both unit and series production. The ADIGE TT640 is equipped with a feeder that facilitates the loading of material into the workspace and enables continuous machine operation. The intuitive SIEMENS SIMATIC PANEL HMI control panel enables precise programming and control of process parameters, ensuring user-friendly operation. All this is complemented by an extremely rigid design that maintains high operational stability even during the most intensive use. The ADIGE TT 640 automatic circular sawing machine weighs 1350 kg. T ...

UsedPaal RS40 residual roll saw / splitter and roll unwinders. Year of manufacture: 1998 Max. roll diameter 400 mm Max. roll length 2.500 mm Saw blade diameter 600 mm Drive power 19 kW Max. enclosure width approx. 1000 mm Max. machine length approx. 9000 mm Machine weight about 2,400 kg max. transport chain speed: 2.45 to 11.75 m/min. Throughput capacity depending on roll length and saw cut depth: 87.5 to 175 m/h

Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details.

cutting diameter: 410 mm saw band length: 5800 x 41 x 1,3 mm table height: 750 mm capacity 90 degrees: flat: 700 x 410 mm capacity 45 degrees: round: 410 mm capacity 45 degrees: flat: 500 x 410 mm capacity 45 degrees: round: links 410 mm capacity 45 degrees: flat: links 430 x 410 mm capacity 30 degrees: round: 320 capacity 30 degrees: flat: 320 x 410 : 15 - 150 m/min workpiece weight: max. 250 kg/m kg : 5,5 kW : 3200 kg : 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages Teleservice for remote maintenance Setting sawing programs in the AV Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering  ...

This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information.

saw blade diameter: 315 mm dimensions of saw-blade: 350 x 40 x 2,5 mm cutting diameter: 90 mm capacity 90 degrees: flat: 150 x 90 mm capacity 45 degrees: round: rechts & links 90 mm capacity 45 degrees: flat: rechts & links 105 x 90 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: flat: 75 x 70 mm cutting speed: 33 / 66 m/min total power requirement: 1,8 kW weight of the machine ca.: 340 kg dimensions of the machine ca.: 900 x 800 x 1700 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Saw blade - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

work piece width: 1.200 mm workpiece height: 500 mm bore diameter: 8 - 40 mm Number of drilling agregates: 3 Stk. spindle speed:: 150 - 1.100 U / min tool changer: 15 Stk saw blade diameter: 1.430 mm cutting speed: 8 - 30 m/min total power requirement: 43 kW weight of the machine ca.: 20 t dimensions of the machine ca.: m Working Capacity Angle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mm Channel sections: 80 × 45 mm to 400 × 110 mm I-beams: 80 × 46 mm to 600 × 220 mm Wide flange beams (HE): 100 × 100 mm to 1,008 × 302 mm Special wide flange and welded T-beams: up to 1,200 × 500 mm Workpiece Data Max. workpiece width: 1,200 mm Max. workpiece height: 500 mm Drilling Unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 – 40 mm Spindle speed: 150 – 1,100 rpm Drilling feed: 0 – 500 mm/min Rapid approach: 3,850 mm/min Rapid return: 8,000 mm/mi ...

saw blade diameter: 370 x 3,0 x 40 mm cutting diameter: 120 mm stroke: -- mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 180 x 100 mm capacity 45 degrees: round: li. 120 / re. 105 mm capacity 45 degrees: square: li. 100 / re. 100 mm capacity 45 degrees: flat: li. 130x100 / re . 130x10 mm capacity 60 degrees: round: 110 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 90 x 100 mm total power requirement: 1,8 / 2,2 kW weight of the machine ca.: 392 kg dimensions of the machine ca.: 700 x 900 x 1800 mm Description: - Mitre left 60° + right 45° - Clamping block with double clamping arm - Robust prism guide for the saw head (adjustable dovetail guide) - Chip brush - Automatic cooling - Metal handle for high clamping force - Solid, strong cast iron table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Optimization saw Type: Opticut S 90 Manufacturer: Dimter Year: 2007 Hours: 582 Automatic miter saw Radial saw Reciprocating saw Cross-cut saw Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

cutting diameter: 300 mm saw band length: 3660 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 290 mm capacity 45 degrees: round: 290 mm capacity 45 degrees: flat: 260 x 280 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: flat: 180 x 170 mm coolant capacity: ca. 100 l Control: SPS total power requirement: 2.4 kW AC weight: 904 kg range L-W-H: 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) Fully automatic with automatic material feed Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table Mitre cuts up to 45° possible in automatic mode Mitre cuts up to 60° possible in  ...