saw ari used for sale

Automatic sawing machine MEP 320 AXI, Information about technical data are not binding., Machine available subject to prior sale., Round cutting capacity: 260 mm, Rectangular cutting capacity: 320x000 mm, Blade dimension: 3150x27x0.9 mm, Band speed range: 20 - 100 m/1 (Stepless), Weight: 1.000 Kg

cutting width: 300 mm Cutting height: 10-120 mm Chain width: 300 Motor output: 22 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: flat: mm turning speeds: 1400 / 2800 U/min engine output: 4,0 kW weight of the machine ca.: 180 Kg dimensions: 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile

Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine.

Wespa band saw. Good used condition. see photos. Blade length max. 4450 mm, blade length min. 4250 mm.

Circular Metal Saw manufactured in 2017. This Imet VELOX 350 AF-ENC features a saw blade diameter of Ø350 mm and a spindle speed of 3600 rpm. It includes an electronic feed control for programming length and quantity, along with an extraction system and a roller conveyor for 6m profiles. If you are looking to get high-quality cutting capabilities, consider the Imet VELOX 350 AF-ENC machine we have for sale. Contact us for further details.

Eisele Cold Circular Saw, BJ. 1968, Machine No. V19104

Circular Metal Saw manufactured in 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details.

Metal Band Saw manufactured in 2014. This Macc 381 AV features fully automatic operation, a hydraulic clamping vice, and a coolant system. It has a cutting capacity for round material up to 280 mm and square material up to 290 x 290 mm. The machine includes a chip conveyor and a numerical control system for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the Macc 381 AV machine we have for sale. Contact us for further details.

Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details.

Key data: 280 mm

Metora, VMG 280G, automatic feeding, chip conveyor, L-310, W-210, H- 180cm

CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details.

Sawblade tiltable: 45 ° Length of the rolling table: 3.300 mm cutting width: 1.200 mm Motor output: 5,5 kW Cutting height: ca. 170 mm Saw blade diameter: 500 mm Speed: 2800/4000/5500 U/min. weight of the machine ca.: 1.500 kg : Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used strip cutting line consisting of: Alphamatic vacuum feeding system with 4 roller conveyors Feeder to the crosscut saw Crosscut saw with vacuum workpiece clamping Conveyor to the rip saw Rip saw Manufacturer: Holzma Model: HPP81-3200 Year of manufacture: 1991 Discharge conveyor Longitudinal roller conveyor with length measurement REA JET automatic labeling system Shredder Brand: Schuko Type: 6M900K Year of manufacture: 2017 Technical specifications - 18.5 kW Belt conveyor system Brand: Kraft Year of manufacture: 2018 Technical specifications - Consists of 13 individual belt conveyors - Conveyor length: 3000 mm each - Belt width: approx. 580 mm - 3 of the 13 conveyors are swing-out Scissor lift table Year of manufacture: 2005 Technical specifications - Load capacity: approx. 1000 kg Edge processing machine Brand: Hebrock Type: AKV2001F Year of manufacture: 2000 Technic ...

Panel saw manufactured in 2020. This FIMAL concept 350 features a squaring length of 3200 mm and a blade diameter range of 300 to 350 mm. It operates at a blade rotation speed of 4000 rpm and has a main motor power of 7.5 hp. If you are looking to get high-quality cutting capabilities, consider the FIMAL concept 350 machine we have for sale. Contact us for further details.

Holtec mobile cross-cut saw Type PICCOLO Year of manufacture 2011 CE Cutting length of the sword 1540 mm Suitable for cross-sections of max. 1150 x 1150 mm Motor power 7.6 kW, 14.5 A, 400 V, 50 Hz

Optimizing Cross-Cut Saw manufactured in 2021. This Paul Reinhardt SlimLine 110 features automatic cutting capabilities, accommodating wood lengths from 300 to 3000 mm and widths from 30 to 350 mm. It is designed for various wood types, including MDF and solid wood, with a maximum cross-section of 58 x 125 mm. If you are looking to get high-quality cutting capabilities, consider the Paul Reinhardt SlimLine 110 machine we have for sale. Contact us for further details.

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

saw blade diameter: 300 mm cutting diameter: 90 mm stroke: mm turning speeds: 40/80 U/min total power requirement: 1,5 kW weight of the machine ca.: 350 Kg dimensions of the machine ca.: 0,9 x 0,8 x 1,5 m Cold circular saw - Machine light - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 46 °, 3000 mm, 1100 mm

MARTIN T73 Automatic Year 2002 Main sawing unit: 5.5 kW Rated current: 15 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 - 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Parallel fence can be lowered manually + suction arm can be moved max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor Top control panel Central lubrication Fixed degree setting on the transverse table (grid) Pull-out support on the transverse table Compressed air supply required Extraction connection: 120 + 100 mm Weight: approx. 1950 kg

Width of the band swa blades: 50-200 mm Sharpening pitch: 60 mm Weight: 750 kg WINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNC PNK-CNC is designed to grind all types of band saw blades used in metal cutting. PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technology Technical specifications: - Band saw width 50-200mm - Band saw length Max. 12m - Blade thickness Min 0.4mm - Tooth pitch Max. 60mm - Tooth depth Max. 30mm - Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°) - Feed rate (speed controlled) Max. 90 teeth/min. - Grinding wheel dimensions D: Ø250mm d:Ø20mm - Grinding wheel thickness 5-13mm (depending on tooth pitch) - CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm - CBN Grinding wheel thickness 2-3mm (depending on tooth pitch) - Grinding wheel rotation (speed controlled) 1400-5500 r.p. ...

Key data: 500 mm

Schnittgeschw. 20 - 70 m/min 16 A plug Length 1.85 m Width 0.80 m Height 1.20 m Weight 300 kg Coolant Unit Belt Gears 1 saw blade new Rollable

A Holzmann table saw including an outrigger for carpentry operation is available. Blade speed: 2800rpm, turntable rotation: 90°, blade adjustment: 45°, motor power S1/S6: 2800W/4200W, table height: 845mm, table dimensions X/Y: 715mm/945mm, max. cutting height 45°/90°: 90mm/120mm. Machine dimensions X/Y/Z: approx. 1350mm/1100mm/1200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible.

Cutting speed 12 - 75 m/min Belt Welding Device 16 A plug Length 0.80 m Width 0.70 m Height 1.60 m Weight 250 kg Work Lamp Tools Saw blade 0.65 mm teeth a/1"

roll diameter: 420 mm throat: 420 mm workpiece height: 300 mm table-size: 610 x 610 mm saw band length: 3150 - 3260 mm turning speeds: 12 - 750 m/min total power requirement: kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 2,0 m Band saw with - Ideal welding machine - Grinding machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schnittgeschw. 12 - 750m/min 16 A plug Top towing eye Ideal Strip Welding Device Work Lamp Chip blow-off device Length 1 m Width 0.8 m Height 1.90 m

Code: 0367 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wooden packaging, furniture, window and door frames, sawmills, and various - CE Standard Blade diameter 500 mm Hole 30 Blade speed 2800 rpm Motor 7,5 Hp Cutting capacity mm 510 Cutting depth mm 145 Manual feed Infeed roller table mm 2000 Outfeed roller table mm 2000 Suction inlet diameter mm 150 Weight kg 350

Manufacturer: Felder Model: K 940 S Year of Manufacture: 2020 Type of Machine : Circular Saw Electrical Data - Voltage: 400 V - Phases: 3~ - Frequency: 50 Hz - Motor power: 4.0 kW - Current consumption: approx. 9.1 A Technical Specifications - Cutting length (sliding table): 2050 to 3700 mm - Cutting width at rip fence: 800 to 1250 mm - Maximum cutting height: 133 mm - Saw blade diameter: up to 400 mm - Blade speeds: 3500 / 4500 / 5500 rpm - Blade tilt range: 90 to 45 degrees Features - X-Roll format sliding table, maintenance-free and high precision - Cast iron saw unit for smooth and stable operation - Electric height adjustment - Scoring unit approx. 1.1 kW Find more here - .ucymachines/ Contact us at - sales@ucymachines

An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Key data: 270 mm

16 A plug Saw blade housing right. side replaced by steel plate. Length 0.8 m Width 0.65 m Height 1.40 m Weight 200 kg

AUTOMATIC MULTI RIP SAW model SCM M3 second hand machine carpet with integral cast iron elements in excellent condition. general condition of the machine: excellent Technical details : max.height of cut mm.120 max.working width mm.300 minimum length of cut mm.250 max.diameter of blades mm.350 min.diameter of blades mm.200 main motor power Hp 35 feed motor power Hp 1,5 arbor speed rpm 4200 variable carpet advancement speed. from 6 to 45 m/min. net weight kgs.2200 volt. 380/50

Drilling and sawing machine for side rails Franke type SG Technical data: Station 1: Cutting components to length Station 2: Drilled on the front side in increments of 27, 32 or 60 mm, 95 mm deep Station 3: drill another hole on the front side or the holes from station 1 are blown out Station 4: Deflection Testing

Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation

English Translation A Berg & Schmit band saw in double-miter design including 20 new saw bands is available. Miter range: 60°-45°, cutting speed: 80m/min, cutting capacity round: 230mm, cutting capacity square: 230mm/230mm, cutting capacity rectangular: 280mm/150mm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1500mm, weight: approx. 350kg. The machine has a hydraulic oil leak. An on-site inspection is possible.

TECHNICAL SPECIFICATION   max. cutting height: 150 mm   sawband length: 3660 mm

Well preserved complete width frame - creel system LINCK type BV. Right-wing machine. Frame width 760 mm, stroke 600 mm, passage height max. 710 mm. Complete with log feeder, creel car with auxiliary car. Splitting wedge with roller conveyor, transverse take-off and model return. Creel with new saw clamps. Countershaft and frame including 132 kW motor with belt drive 310 1/min. Various spare parts can be purchased in a package. Dismantling on your own. Dismantling can be offered completely truck loaded.

saw blade diameter: 450 mm cutting diameter: 150 mm cutting lenght max.: 1000 mm weight of the machine ca.: 1.35 t dimensions of the machine ca.: 2.7 x 1.5 x 1.65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wielopiła Brodpol WP 100 Circular saw blade diameter(max) 350mm Maximum spacing of extreme saws 320 mm Smallest cutting thickness 15mm Largest cutting thickness 100mm Maximum pile width 500mm Minimum pile length 550mm Feed speed adjustable on the inverter 26m/min 30kw main motor Net price

0: 3350 mm Working height: bei 90° = 180 mm 0: 45°/90°/45° 0 Cutting height at 45°: 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular Metal Saw manufactured in 2005. This Elumatec AKS 134 features a saw blade diameter of 550 mm vertically and 500 mm horizontally, with a maximum profile height of 250 mm and a maximum feed of 830 mm. If you are looking to get high-quality cutting capabilities, consider the Elumatec AKS 134 machine we have for sale. Contact us for further details.

0: 355 - 4010 mm Working height: bei 90° = 315 mm 0: 45°/90°/45° 0 weight: 2050 kg Cutting height at 45°: 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 355 - 4010 mm Working height: bei 90° = 290 mm 0: 45°/90°/45° 0 weight: 1800 kg Cutting height at 45°: 210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180 x 100 mm saw blade turning speeds: 3000 U/min total power requirement: 2,2 kW weight of the machine ca.: 0,51 t dimensions: 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

As good as new band saw stand EWD, 17° tiltable! Roller diameter 1800 mm. Absolutely as good as new, as it has only been in operation for a very short time. Year of manufacture 2010. 90 kW drive power, with adjustable belt guide. Includes hydraulic system.