saw ari used for sale

cutting diameter: 235 mm dimensions of saw-band: 2645 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 45/90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 400 Volt total power requirement: 1,1 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information.

saw blade diameter: 510 mm cutting diameter: 150 mm capacity 90 degrees: flat: 450 x 150 mm capacity 90 degrees: square: 150 mm turning speeds: 29 / 58 m/min. total power requirement: 4,2 kW weight: 1,55 t range L-W-H: 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed - hydraulic workpiece clamping - 4 spare saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A fully automatic hydraulic horizontal band saw Amada in scissor design is available. Round cutting capacity: 254mm, rectangular cutting capacity: 254mm/279mm, saw band dimensions X/Y/Z: 3505mm/27mm/0.9mm, speed: 80m/min, feed: 390mm/stroke, max. cutting length: 3500mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/1500mm, weight: approx. 1250kg. An on-site inspection is possible.

Dimensions (L/W/H): 1300x2070x1135 mm Weight: 320 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm

Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg

Dimensions (L/W/H): 4150x1200x1650 mm Weight: 450 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel saw manufactured in 2005. This SCHELLING FM-H 430 features a feed speed of up to 25 m/min and a saw feed speed of up to 120 m/min. It is equipped with a powerful saw motor of 19 kW and a clamp opening of 113 mm. If you are looking to get high-quality cutting capabilities, consider the SCHELLING FM-H 430 panel saw we have for sale. Contact us for further details.

TECHNICAL DATA: Table size: 980 x 750 mm Tilting table Flywheel size: Ø 800 mm Saw blade length: max. 5770 mm / min. 5680 mm Installed power: 4 kW

Panel saw manufactured in 1994. This PANHANS 693 / EURO 30 features a cutting length of 5800 mm and a cutting width of 5150 mm. It includes a rear support table and multiple support beams for enhanced stability. If you are looking to get high-quality cutting capabilities, consider the PANHANS 693 / EURO 30 machine we have for sale. Contact us for further details.

ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect

Panel saw manufactured in 2001. This PANHANS EURO 32 features a cutting length of 5800 mm, a cutting width of 2x2200 mm, and a maximum cutting height of 100 mm. It includes a hydraulic lifting table with roller conveyor and an automatic angle cutting device. If you are looking to get high-quality panel cutting capabilities, consider the PANHANS EURO 32 machine we have for sale. Contact us for further details.

Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with indepe ...

Key data: 5300 mm, 2200 mm

Panel Saw Holz-Her Type 1211 Machine No. 579-FD82 Cutting length maximum 5300 mm Cutting height maximum 2200 mm Cutting depth maximum 80 mm Motor power 3/4 kW Saw blade diameter 300 mm Swivelling sawing unit Slatted frame automatically evasive Free-standing installation possible Saw frame can be divided in height for transport Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm

Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible.

A precision circular saw Rohbi is available. Solid material cutting range: 50mm, tube and profile cutting range: 50-60mm, max. saw blade diameter: 225mm, bore: 20mm, speed: 1400rpm, max. feed length: 600mm, max. cutting length: 160mm. Machine dimensions X/Y/Z: approx. 1700mm/850mm/1600mm, weight: approx. 400kg. An on-site inspection is possible.

cutting diameter: 450 mm saw band length: 6600 x 41 x 1,3 mm table height: 800 mm : 450 mm : 450 mm : 450 x 270 mm workpiece weight: 15 - 95 m/min : 7,5 kW work height max.: 3000 kg connected load: 3750 x 1400 x 2100 mm Control: NEW PRICE ~ 40.700 EURO very good condition Semi-automatic bandsaw, two-column guided Equipment: - hydraulic vice - infinitely variable cutting speed - chip conveyor - line laser - driven chip brush - coolant device - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade width max.: 120 mm Weight: 350 kg Motor output: 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding. Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80120175cm - Net/gross we ...

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bäuerle pull saw with support table left/right and stop. 400mm circular saw blade Cutting depth approx. 450mm Year of construction unknown 3KW

Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Equipment for robot operation with automatic loading door, ND 230 loader, Measuring device for measuring saw blades, Chip breaker grinding attachment, Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm., Grinding speed and grinding path stepless adjustable for each machining surface on the tooth., Automatic central lubrication, Software package for oscillation grinding at rake and clearance angles, Automatic shut-off flap, Automatic fire extinguishing system, Electrostatic oil mist separator N281, Measuring tool, Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180, Sawblade holder with g ...

Multi-Rip Saw Paul K4G 800 Working width 800 mm Cutting height 100 mm with 2 saw shafts with fixed attachment, saw blades are adjustable via rings (1 saw shaft in the machine, 1 saw shaft to replace) a 22 kW motor is installed, the original 44 kW motor is included was used to cut 60 mm thick planks Technically good condition

Multi-Blade Saw Paul K3 / 800 Working width 800 mm Cutting height 60 mm 1 saw shaft, saw blades are adjustable via extension rings Connected load 23.5 kW Technically good condition

A metal band saw is sold. Suitable for someone who has little space available. Dismantling and removal by buyers Pallet truck and a 1.6t forklift on site. Price is 2500 Euro net plus VAT Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Item location 90766 Fürth All information without guarantee

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - .ucymachines/ Contact us at - sales@ucymachines

A glass cutting machine Lenhardt with a Tränker automation and control is available. Strip width: 777mm, strip length: 2366mm. Documentation available. An on-site inspection is possible.

TECHNICAL DATA: Machine for making pallets Usable work surface: 1200 x 1200 mm Motorized loading roller conveyor: 4500 mm Motorized unloading conveyor: 2500 mm + 3000 mm (free-running) Installed power (cutting unit): 9 kW EQUIPPED WITH: Package Holder 01 Lower conveyor belt for wood waste: 8000 x 800 mm + Tiltable end ramp: 2500 mm

Rusk Saw Knife 3 pieces NEW!  Rusk Saw Knife Baker's Saw12 blade, with wide blade3 piecesNo. 1136-12-HRostfrei, total length about 44 cm see picture for details

Kullen Saw Knife No. 1135-12- E.W-H 3 pieces NEW!  Kullen saw blade, 12-blade, double-sharpWith serrated edgeEnglish styleWith saw3 piecesNo. 1135-12- E.W-HRostfrei, total length 44 cm see picture for details

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh bread and mares3 piecesNo. 924-10Stainless steel, total length approx. 38 cm see picture for details

Rusk Saw Knife 3 pieces NEW!  Rusk Saw Knife Baker's Saw12 blade, with wide blade3 piecesNo. 1136-12Stainless steel, total length approx. 44 cm see picture for details

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh breadAnd mares3 piecesNo. 924-8-HRost-free steelTotal length about 32 cm for details see picture

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh bread and mares3 piecesNo. 924-8Stainless steel, total length approx. 32 cm For details see picture

Kullen Saw Knife No. 1135-12 3 pieces NEW!  3 pieces NEW! Kullen saw knife (double)No. 1135-1212 blade, double-sharp, with serrated edge in English style, with saw, stainless steel  Total length approx. 44 cm, with wooden handle See picture for details

Double Cake and Rusk Saw Knife No. 1137-123 Pieces NEW!  3 pieces NEW! Double Cake and Rusk Saw KnifeNo. 1137-1212-Blade (saw and cutting edge) double-edged (saw and knife)Total length about 44 cm, rust-proof, with wooden handle For details see picture

Cutting range round material: 220mm, cutting range flat material: 350mm/220mm, cutting range rectangular material: 220mm/220mm, saw band dimensions X/Y/Z: 3720mm/27mm/1mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 2400mm/1900mm/1500mm, weight: approx. 1350kg, operating hours: approx. 1450h. The drive cylinder must be sealed. Documentation available. An on-site inspection is possible.

cutting diameter: 220 mm saw band length: - mm cutting width: - mm total power requirement: 0,7 kW weight of the machine ca.: 0,240 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 Column Heavy Duty Band Saw Machine BERG & SCHMID SBS 300 VA-1/CNC Year of Make: 2019 Cutting diameter round: 300 mm Square cutting diameter: 300 mm Cutting diameter flat: 300 mm x 260 mm Belt speed: 20 – 100 m/min Modern SNC 20 control system Frequency-controlled saw drive Control buttons with pictograms Powered chip brush Belt Tension Hydraulic Clamping Pressure Regulation Work light Chip conveyor Taxiway 2 m

Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.

I am selling a panel sizing saw HOLZMA HPP380/38/38, built in 2008. Cutting surface 3800x3800mm. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5867mm x D.6637mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.0 optimization software included. Very good condition. Available the same.

I am selling a panel sizing saw HOLZMA HPL380/38/22, built in 2007. Cutting surface 3800x2200mm + rear lift table. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5924mm x D.9963mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.1 optimization software included. Very good condition. Available the same.

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm

Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm -Sliding carriage: is available -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

Pipe saw, pipe jigsaw, support jigsaw, reciprocating saw, handsaw Ideal for sawing work even in wet, damp rooms and shafts, wherever electric reciprocating saws are not permitted. -Output power: 1000 W -Steel pipes: up to max. Ø 160 mm -in the suitcase -Number: 4 saws available -Price: per piece -Dimensions: 690/200/H120 mm -Weight: 8 kg

Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg

Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg